• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.8-19
• /
• 2011

This paper was compared for the output voltage and efficiency of the single-phase Z-source inverter(ZSI) according to shoot through duty ratio D. The eight single-phase ZSI in this study are typical ZSI, Embedded ZSI(EZSI), Improved ZSI(IZSI), Quasi ZSI(QZSI), Series ZSI, Trans ZSI(TSI), Switched inductor ZSI(SL-ZSI) and Extended boost ZSI (exZSI). The eight ZSI are divided into two Groups. ; Group-1 which is ZSI with the ordinary voltage boost factor B, and Group-2 which is ZSI with the maximum voltage boost factor B. For the execution of the proposed study, the PSIM simulation was achieved under the condition of input DC voltage=150[V] of ZSI, load =30[${\Omega}$] and 60[Hz] output filter. The output voltage and efficiency of each ZSI were calculated within the limits of D=0.1~0.4. As a result, the output peak voltage of Group-2 was suddenly increased in a specified duty ratio D, and its efficiency was rapidly decreased. On the contrary, Group-1 shown the output and efficiency characteristics without sudden change compared to Group-2 despite the duty ratio increase. The efficiency of the Group-2 was sharply declined at duty ratio D of the most output voltage, but, in case of Group-1, the efficiency was slightly declined. Finally, the input DC current of ZSI with DCM and CCM was discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.142-149
• /
• 2000

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed in the scale 1:1. The model experiments were executed at a pressure smaller than in the real gas turbine. The combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure, and NOx emission were measured at partial and full load for both model and on-site testing. The comparison of these items of information, received on similar modes in the stand and field tests, has allowed the development of a method of calculation and the improvement of gas turbine combustors.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1319-1327
• /
• 2001

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed 1:1 scale. The model experiments were executed at a lower pressure than that in a real gas turbine. Combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure and NOx emission were measured at partial and full loads for both model and on-site testing. The comparison of these items in the stand and field test results led to has the development of a method of calculation and the improvement of gas turbine combustors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1940-1943
• /
• 1998

A new PWM rectifier which offers a unity power factor is proposed. The circuit has same inductance as the conventional boosting type PWM rectifier in powering mode, but the inductance is splitted to 2 part in freewheeling mode. So the period of freewheeling mode is shorter than that of conventional boosting type PWM rectifier, and discontinuous input current is obtained in wide duty range. Therefore the proposed PWM rectifier accomplishs a unity power factor in wide range of duty ratio and boosting factor. And the conventional boosting type PWM rectifier has poor power factor near the unity boosting ratio, the proposed PWM rectifier improves this problem. The mathmatical analysis are presented and experimental results are given.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.872-882
• /
• 2016

A novel pseudo-continuous conduction mode (PCCM) voltage-fed single-stage power factor correction (PFC) full-bridge battery charger is proposed in this paper. By connecting a freewheeling transistor in parallel with an input inductor, the PFC cell can operate in the PCCM with a constant duty ratio. Thus, the dc/dc stage can be designed using this constant duty ratio and the restriction on the duty ratio of the PFC cell is eliminated. As a result, the input current distortion is less and the dc bus voltage becomes controllable over the wide output power range of the battery charger. Moreover, the operation principle of the dc/dc stage is designed to be similar to that of a conventional phase-shifted full-bridge converter. Therefore, it is easy to implement. In this paper, the operation of the new converter is explained, and the design considerations of the controller and key parameters are presented. Simulation and experimental results obtained from a 1 kW prototype are given to confirm the operation of the proposed converter.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.571-579
• /
• 2019

가시광통신은 조명과 통신을 동시에 수행하므로, 데이터 전송과정에서 광전력의 변동으로 인하여 발생하는 플리커를 방지함과 동시에 조명제어 기능을 갖추는 것이 중요하다. 본 논문에서는 플리커를 방지하고 조명제어를 위하여 맨체스터코드를 사용하였다. 송신부에서는 맨체스터코드의 듀티율을 사용하여 LED의 조명을 제어하였고, 수신부에서는 RC-고역통과필터의 가장자리 스파이크 신호를 사용하여 인접된 잡음광을 차단하고 맨체스터코드를 복구하였다. 실험에서 LED 빛은 플리커가 없는 상태를 유지하였고, 맨체스터코드의 듀티율을 변경함으로써 평균 광전력을 CW LED 광의 약 8~68 % 의 범위에서 제어하였다.

• 아태비즈니스연구
• /
• 제12권1호
• /
• pp.87-100
• /
• 2021

Purpose - This study aims to examine the antecedents of willingness to pay in the domain of duty free shop. Design/methodology/approach - This study chooses willingness to pay as explained variable. The candidates of explanatory variables are price fairness, brand awareness, employee service, product diversity, and crowding. This study uses survey to explore the linear relation between variables. This research collected data using online panel data collection service. The number of valid observation is 265. The research targe is Lotte duty free store. Statistical analysis was for statistical inference. To attain the information of survey respondents, frequency analysis is employed. Next, this study implemented exploratory factor analysis and reliability to ensure both validity and reliability of measurement items. This study executed multiple regression analysis to test research hypotheses Findings - Regrading results, brand awareness, employee service, and product diversity are positively associated with willingness to pay of duty free shop product. Moreover, the results of regression analysis suggest the inverted-U shape association between crowding and willingness to pay. However, price fairness appeared as non-significant variable to account for willingness to pay in the multiple regression analysis. Originality - This study contributes to the literature by examining duty free shop customers more.

• 한국조리학회지
• /
• 제6권2호
• /
• pp.79-95
• /
• 2000

In the modern industrial society, the management of human resources is regarded as an area as much important as the management itself. The development of human capacity is required to accomplish upgrading human resources quality. The objective of this study aims to seek the way to solve the problem of the job satisfaction of diner out company employee. The collecting data is analyzed by sass which is one of the computer. programs. This empirical research result shows some facts as follows : First, Significant differences between male and female in regard to job satisfaction were found. Second, No significant differences between unmarried and married in regard to job satisfaction were found. Third, Significant differences were found in the accomplishment and communication factor of job satisfaction according to the age, Fourth, Significant differences were found in the hard work environment and accomplishment factor of job satisfaction according to the education Fifth, Significant differences were found in the hard work environment factor of job satisfaction according to the major. Sixth, Significant differences were found in the wages, accomplishment , communication factor of job satisfaction according to the position. Seventh, Significant differences were found in the accomplishment and affinity factor of job satisfaction according to the period of the job. Eighth, Significant differences were found in the duty trait factor of jobs satisfaction according to the level of the pay. Ninth, Significant differences were found in the duty trait factor of job satisfaction according to the kind of the job. Tenth, Significant differences were found in job satisfaction according to the kind of diner out company.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.16-18
• /
• 2008

A novel general direct duty ratio pulse width modulation strategy is proposed to modulate matrix converters. By using average concept over one switching period, the modulation algorithm and the required equations are derived to synthesize the desired output voltage and to achieve the controlled input power factor. The proposed method use continuous carrier and the predetermined duty ratio signal for directly generating gating signals an thus is named "direct duty ratio PWM(DDPWM)". The feasibility and validity of the proposed strategy are verified by experimental results.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.712-721
• /
• 2014

This paper introduces a simple grid-voltage-sensorless control scheme for single-phase power factor correction (PFC) boost converters. The grid voltage waveform is obtained based on the dc output voltage, the switching duty ratio, and a phase-lead compensator. In addition, the duty ratio feedback is utilized to obtain the unity input power factor and the zero harmonic current. The proposed control scheme is designed and mathematically analyzed based on a small-signal model of PFC boost converters. To verify the effectiveness of the proposed control scheme, several simulations and experiments are carried out in two applications: an industrial power system with a 60 Hz grid frequency and a commercial aircraft application with a 400 Hz grid frequency.