• 제목/요약/키워드: Durable design

검색결과 169건 처리시간 0.024초

Verification on Cold-Tolerance of Some Fruit Trees as Species for Urban Greening Plants

  • Lee, Jin-Hee;Oh, Hee-Young;Kwon, O-Man
    • 한국환경과학회지
    • /
    • 제26권10호
    • /
    • pp.1155-1166
    • /
    • 2017
  • This study selected commonly known species of fruit trees, and re-selected the species that endure the stress of extreme cold weather and physiologically restore themselves to the previous state until the following year. Then we could go ahead to propose the species that were appropriate as urban greening plants in weather condition of any part of the country. To do this, we conducted an experiments for six species of fruit trees based on the preference of the general public and recommendation of the experts; Morus alba (English name: mulberries), Diospyros kaki (English name: Persimmon), Prunus persia (English name: Peach), Elaeagnus umbellata var. coreana (English name: Korean Autumn Olive), Malus domestica 'Alps Otome' (English name: Alps Otome), and Prunus mume (English name: Blue Plum). The experiment verifies whether the trees survive without any stress from the cold weather under the national climate conditions (one in the suburbs of Seoul: Yongin city, one in the central Chungcheong region: Daejeon city, and in the southern Gyeongsang region: Jinju city in Korea). The experiment lasted for a year from August 2016 to August 2017. The levels of electrolytic efflux, chlorophyll content, plant height, fresh weight, and dry weight were measured four times (on August of 2016, January, February, and August of 2017) for each tree planted bare ground outdoors. Results showed that Diospyros kaki, Prunus persia, and Malus domestica 'Alps Otome' were proven durable and resistant to winters of all three areas (one in the suburbs of Seoul: Yongin city, one in the central Chungcheong region: Daejeon city, and in the southern Gyeongsang region: Jinju city in Korea). Especially, the increase of chlorophyll content and the reduction of electrolytic efflux were noticeable in Prunus persia than in the other two species, proving itself as the most cold-tolerant among the six species used in the experiment. In addition, interpreting from the physiological restoration data of one-year span before and after getting through winterer, Prunus persia was proven to be the most cold-tolerant species.

지역경찰의 근무복 및 방탄·방검복 개선을 위한 실태조사 (Investigation for Improving Local Police Uniforms and Bullet/Stab Proof Garments)

  • 최미교;장정아
    • 한국의류산업학회지
    • /
    • 제21권5호
    • /
    • pp.665-676
    • /
    • 2019
  • This study provides basic data for future design proposals aimed at improving the uniforms and bullet/stab proof garments of local police. An analysis was conducted on various aspects of the uniforms used until 2015 and those newly introduced in 2016. Current bullet/stab proof garments were compared with old stab proof garments; in addition, police force posting on the internal SNS were analyzed in regards to the improvement needs for uniforms. Analyses results are as follows. As for the uniforms, convenience was improved by eliminating the necktie, and the four trigrams embroidery was added to emphasize the Korean identity. Cargo-style pants were added for enhanced activity, and the color of the top was changed to turquoise to improve discrimination. In terms of material, durable polyester was used heavily in outside uniforms that were likely to be damaged during work; consequently, the percentage of elastic materials was increased for improved activity. The price showed a high increase rate due to inflation and the use of functional new materials. Complaints and demands for improvement continued despite various modifications made to uniforms and suggested a strong need for further improvements that reflected the opinions of wearers. As for the protective garments, there was a limit to reducing the final weight despite the use of lightweight material because of protection performance enhancements made from expanding the protection surface area. Also, considering further decrease in supply rate, it was deemed necessary to secure budget for full supply of bullet/stab proof garments.

Effects of Global Consumer Culture Positioning versus Local Consumer Culture Positioning in TV Advertisements on Consumers' Brand Evaluation and Attitude toward Brand

  • Lee, Chol;Choi, Gyoung-Gyu
    • Journal of Korea Trade
    • /
    • 제23권8호
    • /
    • pp.89-109
    • /
    • 2019
  • Purpose - We perform an empirical analysis of the effects of global consumer culture positioning (GCCP) in TV advertisements on consumer's brand evaluations (perceived quality, perceived price, and brand prestige) and attitude toward brand. Also, we analyze the moderating roles of consumer characteristics (ethnocentrism and level of product knowledge) in those effects. Design/methodology - This research is based on a survey of 210 randomly-selected university students in Seoul, Korea. The participants in the survey were shown a total of 8 TV advertisements of consumer goods of nondurable goods (fast food and carbonated drinks), and durable goods (sports shoes and digital camera), which included two advertisements for each product where one uses GCCP strategy while another uses LCCP strategy. We estimate the structural model using the AMOS 18.0 computer program. Findings - We find that GCCP has more positive effects on consumers' brand evaluations and attitude toward brand than LCCP in TV advertising. We also find that GCCP has stronger effects on brand evaluation and attitude toward brand in consumers with weak ethnocentrism and in those with a low level of product knowledge. Practical implications - Using GCCP in an advertisement is an effective way of improving consumer's evaluation of the brand and attitude toward the brand mainly when cosmopolitan consumers and consumers with low knowledge levels are segmented as targets. Originality/value - The study contributes to identify how and for what consumer groups' global brand positioning strategies in TV advertisements affect consumers' brand evaluations and their attitudes toward brands.

Flexural bearing capacity and stiffness research on CFRP sheet strengthened existing reinforced concrete poles with corroded connectors

  • Chen, Zongping;Song, Chunmei;Li, Shengxin;Zhou, Ji
    • Structural Monitoring and Maintenance
    • /
    • 제9권1호
    • /
    • pp.29-42
    • /
    • 2022
  • In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

Resistance of Polystyrene-Impregnated Glued Laminated Lumbers after Exposure to Subterranean Termites in a Field

  • Dede HERMAWAN;Mahdi MUBAROK;Imam Busyra ABDILLAH;Yusuf Sudo HADI;Cossey YOSI;Aujchariya CHOTIKHUN;Rohmah PARI;Gustan PARI
    • Journal of the Korean Wood Science and Technology
    • /
    • 제52권1호
    • /
    • pp.70-86
    • /
    • 2024
  • Termites are a serious threat to wood-based products in Indonesia. This study investigated the termite resistant property of glulam made from polystyrene-modified wood. Three tropical fast-growing wood species, namely mangium (Acacia mangium), manii (Maesopsis eminii), and rubberwood (Hevea brasiliensis), were prepared for flat-sawn laminae. After getting air-dried condition, the laminae were impregnated with polystyrene using potassium peroxydisulphate as a catalyst followed by polymerization at 80℃. Polystyrene-impregnated and control glued-laminated lumbers (glulams) were manufactured, and solid wood was provided. Three wood species and three wood products with six replicates were exposed in a field in Bogor, Indonesia, for four months, and before the tests, their density and moisture content were measured. At the end of the field tests, the weight loss and protection levels of each test sample were determined. A completely randomized factorial design was used for data analysis. The weight percentage gains for mangium, manii, and rubberwood were 22.30%, 18.22%, and 10.44%, respectively. The results showed that manii belonged to low-density wood, whereas the other two woods were medium-density wood, and the moisture content was the ambient moisture content, typical of the Bogor area. Regarding weight loss and protection level, mangium was the most durable against subterranean termite attacks, followed by rubberwood and manii. Among the wood products, the polystyrene-impregnated glulam presented the highest durability, followed by the control glulam and solid wood. Therefore, mangium and rubberwood polystyrene-impregnated glulams are recommended for future product development.

도시철도터널공사 시 하저통과구간의 지반투수저하 공법에 대한 연구 (A Study on the Permeability Reduction Methods of the Riverbed Ground during Urban Railway Tunnel construction)

  • 김준정;조국환;이준석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.551-557
    • /
    • 2007
  • 본 논문은 도시철도공사 시 하저통과구간의 지반투수저하공법에 대한 연구결과이다. 본 연구에서는 하저지반의 투수저하공법들 중 특히 주입공법에 대하여 연구의 초점을 두었다. 이에 따라 하저지반 투수저하를 위하여 적용되고 있는 기존주입공법들의 이론적 배경과 시공방법들을 문헌과 시공사례자료 등을 고찰하여 비교 분석하였다. 이와 같이 다양한 고찰을 통하여 주입공법들을 하저통과 도시철도터널 안전시공 측면에서 평가하였다. 또한 분석 결과로부터 하저지반에서 장단기적으로 안전하게 지반수리거동을 도모하기위한 주입공법의 설계기법에 대하여 제시하였다. 이와 같이 하저지반 투수저하주입공법들의 평가결과를 근거로 하저통과 터널공사 시 안전시공과 완공 후 터널구조물의 장기적인 안전유지관리 측면에서 적용성이 양호하다고 판단되는 N.D.S(Natural Durable Stabilizer)공법과 S.M.I(Space-Multi- Injection Grouting) 공법을 제시하였다. 그러나 이 두공법의 실질적인 시공효과를 평가하기위하여 OO지역에 건설예정인 하저통과 도시철도터널공사구간에서 시험시공을 실시하였다. 시험시공기간 중에는 실내 및 현장에서 지반투수특성시험을 실시하여 시공전후의 지반의 투수성저하효과를 평가하였으며, 두공법의 시험시공결과는 이론적인 배경과 함께 비교 분석하였다. 결론적으로 S.M.I공법의 경우 N.D.S공법보다 투수성 저하효과가 큰 것으로 나타났다. 즉, 주입공법에 있어서 시멘트 무기질계 재료보다는 비 알카리성 실리카 졸계가 투수저하 효과를 더 크게 할 수 있을 것으로 판단되었다. 끝으로 본 연구결과로부터 특히 철도터널설계시 하저지반의 투수저하 증대를 위한 주입공법 설계기술발전에 공헌 할 것이다. 값을 가지며 표준 편차가 작았다 PR와 $SpO_2$는 두 그룹 모두 정상범위내의 값을 보였다. 점막하 주사를 이용한 Midazolam의 추가 투여는 안전성을 크게 침해하지 않는 범위 내에서 진정 깊이를 깊게 해주며 안정적인 진정을 이루게 함으로써 보다 바람직한 진정을 유도해 줄 수 있는 것으로 사료된다.보이지 않았다.tag의 표면에 형성된 뚜렷한 측부 가지들도 발견되었다.}60cm$에 위치시켜 표면선량의 over dose나 under dose의 발생 방지를 위한 주의가 반드시 필요하겠다.군의 전단결합강도가 가장 낮았다.본에서 III군에 비해 크기가 큰 기포가 더욱 많이 관찰되었다.e의 약동학은 cimetidine에 의해 유의한 차이를 보였으며 CYP1A2유전자형에 따른 영향은 관찰할 수 없었다. CYP1A2유전자형에 따른 생체내 대사능을 관찰하는 실험이 향후 이루어 져야 할 것으로 사료된다.san film보다 큰 수증기 투과도를 보였다.적으로 유의한 차이를 보이지 않았다.y tissue layer thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되었다.한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glyc

  • PDF

고내구성 하전 및 집진 방식 전기집진기의 미세입자 제거 특성 (Evaluation of Fine-Particle Removal Performance of Novel ESP with Highly Durable Chargers and Collectors)

  • 김학준;한방우;홍원석;신완호;송동근;정상현;김용진;오원석;황규동;유성연
    • 대한기계학회논문집B
    • /
    • 제34권4호
    • /
    • pp.423-428
    • /
    • 2010
  • 반도체 공정에서 배출되는 미세입자를 포집하기 위하여 전기집진장치가 적용되고 있으나, 배출가스 내 포함된 강부식성 오염원에 의한 전기집진장치 내부 오염 및 부식 문제가 심각하여, 이를 해결하기 위한 방안이 절실하다. 본 연구에서는 탄소섬유로 이루어진 하전부와 PET 필름 사이에 금속 박막이 삽입된 집진부로 이루어진 내부식 전기집진장치를 개발하여, 하전부 및 집진부 인가전압, 처리유량, 하전부 채널 수 등의 운전 조건에 따른 전기집진기의 초미세입자 집진 성능을 평가하였다. 평균입경이 100 nm인 KCl 입자를 시험입자로 사용하였으며, 전기집진기 전/후단 입자 농도 변화를 측정하기 위하여 SMPS를 사용하였다. 본 연구에서 개발된 9채널 하전부와 65 mm 집진부로 구성된 전기집진기의 성능평가 결과, $500\;m^3/hr$ 유량조건에서 하전부 및 집진부에 7 kV와 10 kV를 각각 인가하였을 때, 300 nm입자에 대한 포집효율이 90% 이상으로 높게 나타났다.

1920년대 소비에트 구성주의 패션에 관한 연구 (A Study on Soviet Constructive Fashion in 1920s)

  • 조윤경;금기숙
    • 복식
    • /
    • 제36권
    • /
    • pp.183-203
    • /
    • 1998
  • The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

  • PDF

관련법규 변천이 아파트단지 내 어린이놀이터 변화에 미치는 영향 연구 - 서울시 소재 현장을 중심으로 - (A Study on the Effect of the Changes of Play Facilities on Rules Changes - Focusing on the City of Seoul -)

  • 김동찬;서주환;박유정
    • 한국조경학회지
    • /
    • 제37권2호
    • /
    • pp.26-35
    • /
    • 2009
  • 본 연구는 약 20년 동안 어린이놀이터 관련법규의 변화내용을 연도별, 법규별로 분석하여 관련법규의 변화가 놀이터 디자인 변화에 영향을 주었는지 연구하였다. 분석결과, 법규별, 년도별 변천내용에 대한 연구대상지의 디자인 변화는 법규 항목별로 영향을 미치는 시기, 내용이 각각 차이가 있는 것으로 나타났다. 첫째, 도로 및 주차장으로 부터의 이격거리, 놀이시설간 안전휀스의 설치, 내구성 있는 재료의 사용 등이 항목 개정시기 이후 디자인 변화에 영향을 준 것으로 나타나고 있다. 둘째, 법규의 제 개정 이후 디자인의 변화가 나타나는 항목들은 상록수의 차폐, 일조조건이 양호한 위치의 선정 등이다. 셋째, 법규의 변화가 놀이터 디자인 변화에 영향을 미치지 않는 항목은 놀이터 내 주민운동시설의 대체가능, 위생진단 연 2회 이상으로 나타났다. 이렇게 영향요인별로 차이가 발생한 원인은 놀이터 디자인에 정확히 반영할 수 있는 법규의 세부기준이 부족하여 임의 해석을 통하여 영향을 주거나, 시간이 지나면서 외부공간의 질적 향상의 변화추세에 맞추어 반영되어진 것으로 판단된다. 또한, 주민운동시설로의 대체는 완화규정이라 할 수 있어 연구대상지 여건에 따라 주관적인 반영이 있는 것으로 판단되어진다. 이러한 법규의 변화내용이 놀이터 디자인 변화에 정확히 반영이 되어지기 위한 법규의 개선방안을 제시하였다. 특히, 법규의 준수가 가능한 구체적 기준의 제정이 필요한 것으로 나타났다. 예를 들어 상록수의 차폐는 놀이터 주변 녹지의 폭, 차폐 권장수종, 차폐의 길이 등의 보완이 필요하며, 일조조건이 양호한 위치는 놀이터의 향을 제한하거나, 인접 건축물과의 이격거리 기준 등을 제시하는 것이 필요한 것으로 판단된다. 그리고 최근 설계지침과 과업내용에서 나타나며 서론에서 언급한 놀이의 기능을 충실히 하기 위한 다양한 외관, 변화가 가능한 형태, 테마공간의 부여 등 "어린이 놀이터 설계기준(가칭)"이 마련되어 법규의 부족한 부분을 보완하는 것이 필요할 것으로 판단된다.

랜딩기어의 구조적 내구성 해석에 의한 융합 연구 (Convergent Study by the Structural Durability Analysis of Landing Gear)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제11권6호
    • /
    • pp.191-196
    • /
    • 2020
  • 본 연구에서는 랜딩기어의 길이에 따른 3가지 형상을 가진 모델링으로서 내구성을 해석하였다. 전반적으로 랜딩 기어의 상부로 갈수록 변형량이 많이 발생하나 등가응력의 경우는 하부 바로 윗부분에서 응력이 많이 작용하는 것을 알 수 있었다. Model 3는 Model 2에 비하여 최대의 등가응력은 4배 이상이 나오고 최대의 전변형량은 24배이상 나타남을 알 수 있었다. Model 3는 하단부에서 항복응력을 넘어서 파손이 발생할 수 있음을 알 수 있었다. 상단부가 하단부 보다 긴 Model 2는 3가지 모델들 중 최대의 등가응력과 전변형량이 가장 적게 나타남을 알 수 있었다. 따라서 구조적인 면에서 Model 2가 착륙시에 가장 내구성이 있고 Model 3가 내구성 면에서는 가장 저하됨을 알 수 있었다. 본 연구의 설계 및 해석 결과는 실제적으로 랜딩기어의 구조적 내구성을 파악하는 데에 효율적으로 적용할 수 있다. 랜딩기어의 구조적 내구성 해석을 적용함으로서, 본 논문이 미적인 설계에 부합된 융합 연구라고 보여진다.