• Structural Engineering and Mechanics
• /
• v.66 no.6
• /
• pp.761-769
• /
• 2018

In this paper, we study the Carbon/Glass hybrid laminated composite plates, where the buckling behavior is examined using an accurate and simple refined higher order shear deformation theory. This theory takes account the shear effect, where shear deformation and shear stresses will be considered in determination of critical buckling load under different boundary conditions. The most interesting feature of this new kind of hybrid laminated composite plates is that the possibility of varying components percentages, which allows us for a variety of plates with different materials combinations in order to overcome the most difficult obstacles faced in traditional laminated composite plates like (cost and strength). Numerical results of the present study are compared with three-dimensional elasticity solutions and results of the first-order and the other higher-order theories issue from the literature. It can be concluded that the proposed theory is accurate and simple in solving the buckling behavior of hybrid laminated composite plates and allows to industrials the possibility to adjust the component of this new kind of plates in the most efficient way (reducing time and cost) according to their specific needs.

• Asian Journal of Innovation and Policy
• /
• v.7 no.1
• /
• pp.207-234
• /
• 2018

A manufacturer of a durable good typically purchases supplies, including parts for assembly - that are also useful for repairs - from independent "original equipment suppliers" with which it contracts. The manufacturer is a branded monopolist of its final assembled product. To put into effect also a monopoly of the replacement parts, it must stipulate in its arrangements with independent suppliers of the parts that they not supply such patented parts to any other buyer. Durable good owners would then only be able to obtain their requirements of replacement parts from the same company that supplied the durable. This would amount to a tie-in of replacement parts to the direct purchase of new durables. And that describes the apparently widespread practice of automobile manufacturers in India, as exposed in a recent case before the Competition Commission of India (Samsher Kataria v Honda Siel Cars India Limited and others). Here, I will argue that such tie-in enabled automotive manufacturers to more fully appropriate consumer surplus, which induced them to lower the price of new cars, sell more cars and also sell more repair parts. The tie-in expanded the auto parts industry and promoted new entry. The main restraint on expansion of India's automotive manufacturing is not monopoly. It is government protection in the form of tariffs on automobiles and auto parts.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.150-157
• /
• 2020

Hexachloro-cyclophosphazene(HCCP), a formaldehyde-free flame retardant (FR), was steam-cured with triethanol amine(TEA) to impart durable flame-retardancy to cotton fabrics. While the HCCP treatment alone showed very limited resistance to repeated laundering cycles, the addition of TEA substantially improved the laundering durability of the FR cotton up to twenty laundering cycles. The extended washing resistance was accomplished by the increased nucleophilic substitution of unreacted P-Cl groups in HCCP by the TEA resulting in the more densely crosslinked FR networks. With increasing molar ratio of TEA to the HCCP up to 2, the flame retarding effectivity and the synergistic effectiveness improved to 2.8 and 1.8 respectively. TGA and microscale combustion calorimetry verified the pyrolysis and combustion behaviors of the FR-cotton, which showed lower maximum pyrolysis and combustion temperatures together with substantially decreased peak pyrolysis and heat release rate, synergistically yielding larger amounts of carbonaceous chars. The formaldehyde-free HCCP and TEA can be a durable FR finishing agents for cotton fabrics acting through a solid-phase flame-retarding mechanism.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.17-23
• /
• 2003

Fourier transform infrared spectroscopy(FT-IR) was used to characterize the intermolecular ester crosslinkages in cotton cellulose. The FT-IR data show that the band of the ester carbonyl group can be separated from overlapping carboxyl/carbonyl band by converting carboxyl group to carboxylate. When esterification occurs between a polycarboxylic acid and cotton cellulose, the carbonyl groups retained in the cotton exist in three forms; ester, carboxyl, and carboxylate anion. The FT-IR data were also correlated to the durable press rating result obtained. The appearance of BTCA-finished durable press silk/cotton fabrics were improved.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2003

In order to prepare a softener, alkyl imidazoline salt, fatty carbamide salt, and fatty polyamide salt were synthesized first, and then the synthesized salts were blended. The prepared softeners were applied to acrylic fibers, and then several properties were tested. As a result, the prepared softeners show good softening and lubricating properties, and they also show a little antistatic property. Through bending resistance tests and measurements of feeling change of acrylic fibers treated with the softeners, it was proved that the prepared softeners are durable softeners.

• Korean Journal Plant Pathology
• /
• v.13 no.2
• /
• pp.85-89
• /
• 1997

Etiological components of the rice cultivars possessing durable resistance to rice blast were evaluated. In the greenhouse test by artificial inoculation, number of leaf blast lesion in Dongjinbyeo was not increased by any race of the pathogen, while the lesion number on the resistant cultivar Palgongbyeo and susceptible cultivar Jinmibyeo was increased rapidly. Size of the lesion in Dongjinbyeo was smaller and progressed more slowly than the resistant cultivar Palgongbyeo until 11 days after inoculation. Latent period in Dongjinbyeo was intermediate. However, the period was significantly variable depending upon the races. Least amount of conidia was produced in Dongjinbyeo by race KJ-107 and the number of conidia was decreased rapidly from 11 days after inoculation.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.87-92
• /
• 1995

To prepare a O/W type durable softner(OESA), octadecamidoethylaminoethyl dodecate and tetra (2-dodecamidoethyl) urea synthesized as the main components of softner, were blended with polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of OESA was good, and mixed HLB value was 9.7, OESA was found was to be good durable softner for nylon through the examination of softness, lubriation, antistatic property, bending resistance, and color fastness.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.17-23
• /
• 1998

To prepare a O/W type nonionic durable softner(ANSA), synthesized 1, 3-dihexadanoyl-2, 7-dioxy-6, 8-di(2-hexadecanoyloxyethyl)-1, 3, 6, 8-tetraazacyclodecane as the main component of softner, was blended with beef tallow, anhydrous lanolin, polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of ANSA was good, and the mixed HLB value was 9.8. After the treatment of ANSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured, respectively. As a result of the measurement, ANSA was proved to be durable softner with good softness.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.429-430
• /
• 2003

Durable Finish(DP) 가공은 면직물이나 의복의 구김 방지성을 주기 위해 널리 사용되어진다 이는 비결정부분에 위치한 셀룰로오즈 분자의 체인 사이에 수지가 가교결합을 형성하여(Figure 1) 네트워크 형태의 거대 분자구조를 만들고 체인간의 움직임을 억제하여 섬유가 뻣뻣하게 된다. 이로 인해 면섬유의 인장강도, 인열강도 등 물리적 강도가 심각하게 저하된다. 본 논문에서는 현재 durable finishing에 가장 많이 사용하는 Dimethylol Dihydroxy Ethylene Urea(DMDHEU)를 이용한 DP 가공 면직물의 강도저하를 관찰하고 선택된 효소처리가 강도회복에 미치는 영향을 연구하였다. (중략)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.3-9
• /
• 1997

From the standpoint of end-use and practical performances, attention was focused preparing cotton fabrics which posses good dyeability as well as water repellency. The results are summarized as follows, as far as findings obtained from this study is concerned. The fluoro chemical (FC) water repellent finished cotton fabrics exhibited good dyeing properties and colorfastness to washing. Furthermore, the DMDHEU durable-press and FC water repellent finishes in a single pad bath resulted in excellent durable press performance and good water repellency.