• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.63-67
• /
• 2003

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs to improve durability of structure. This study separately examined physical and chemical specific of quality liquid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.25-28
• /
• 2008

일반적으로 철근콘크리트 건축물은 외부의 기후에 노출되어 있어 겨울에서 이른 봄까지 동결과 융해의 반복적인 작용에 영향을 받는다. 이러한 동결융해 작용은 콘크리트의 균열을 발생시키거나 콘크리트 표면의 박리를 일으켜 내구성 저하의 원인이 된다$^{1),2)}$. 본 연구에서는 철근콘크리트보의 동결융해 경험에 따른 반복하중 하에서의 이력 특성의 평가를 위해 동결융해 사이클을 변수로 하여 철근콘크리트보의 반복하중 가력시 거동을 비교하고자 6개의 시험체를 제작, 실험하였다. 실험결과를 통해 동결 융해에 노출되어있는 철근콘크리트보의 반복하중하의 이력특성을 평가하는데 기초적인 자료를 제시하고자 하였다.

• 한국콘텐츠학회논문지
• /
• 제18권11호
• /
• pp.455-461
• /
• 2018

본 논문에서는 DFRCC 보수모르타르와 탄소섬유시트를 사용하여 보수보강을 실시한 철근콘크리트보를 대상으로 동결융해시험을 실시하여 휨강도 및 동탄성계수를 측정하고 비교 평가한 실험적 연구결과를 제시하였다. 이를 위해 $100{\times}100{\times}400mm$ 크기의 각주형 보를 총 14개 제작하여 KS F 2456에 따른 동결융해시험과 휨강도 시험을 실시하였다. 인장 및 압축측에서 각각 3-D10의 철근을 배치하였으며, 보수보강은 보의 3면에 각각 실시하였다. 동결융해시험에서는 각각 100 Cycle 및 200 Cycle에서 상대동탄성계수를 산정하였다. 실험결과, 휨강도에서는 탄소섬유시트를 사용한 경우가 DFRCC 보수모르타르의 경우보다 약 15% 정도 크게 나타났으며, 동탄성계수 측면에서는 큰 차이를 보이지 않았다. 이는 공시체 크기에 비해 비교적 많은 철근량이 배근되어 간섭효과가 나타난 것으로 추정되어 추가적인 실험과 연구가 필요한 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.331-336
• /
• 1999

Permeable polymer concrete in this study is one of the environment conscious concrete that can be applied at road, side walks and river embankment, etc. The purpose of this study is to evaluate the effects of mix proportions such as resing content, filler-binder ratio and aggregate ratio on the freezing and thawing resistance of permeable polymer concrete. The permeable polymer concrete are prepared with the resin ratio of 5%, 6% and 7%, filler-binder ratio of 0, 0.5 and 1.0, and 2.5~5mm sized aggregate ratio to standard sand of 10:10, 10:20, 20:10 and 20:20. It is tested for freezing and thawing test according to ASTM C 666092, and then, weight change, length change, relative dynamic modulus, durability factor, and compressive and flexural strengths after test are measured. From the test results, the resistance to freezing and thawing of permeable polymer concrete increased with increase the resing content, filler-binder ratio and fine aggregate ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.48-53
• /
• 2003

The steel slag, a by-product which is produced on the process of manufacturing steel by refining pig iron is mainly used as road materials after aging it. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the volume expanded. Due to this reason it prevents steel slag from being used as aggregate of concrete. But steel slag used in this study is controled by a air-jet method which rapidly cools substance melted at a high temperature. Rapid cooling prevents from generating of free-CaO in steel slag. In this study, it was investigated that steel slag manufactured by air-jet method affects on concrete in the freezing and thawing. As results of this study, concrete mixed with steel slag was worse in the freezing and thawing than concrete mixed with sand in spite of using air entraining agent. To obtain durability of concrete in the freezing and thawing, it is desirable to mix 50% of steel slag in concrete per unit weight of volume.

• 농업과학연구
• /
• 제30권2호
• /
• pp.154-163
• /
• 2003

이 연구는 플라이 애시를 결합재 중량의 20%, 재생굵은골재를 천연쇄석굵은골재의 0%, 25%, 50%, 75%, 100%를 치환하여 압축강도와 동결융해 특성을 구명하였으며, 이 연구를 통해 얻어진 결과를 요약하면 다음과 같다. 1. 재령 28일의 압축강도는 모든 배합비와 W/B 35%에서 $400kgf/cm^2$이상으로 나타나 고강도콘크리트에 이용될 수 있을 것으로 생각된다. 2. 중량감소율은 동결융해 300사이클에서 1%미만으로 나타났고, 표면박리와 같은 현상은 나타나지 않았으며, 재생골재의 대체율이 증가할수록 감소율은 증가하였다. 3. 초음파진동속도는 동결융해 300사이클에서 19~24%정도의 감소율을 나타내었으며, 재생골재의 대체율이 증가할수록 감소율은 증가하는 경향을 나타내었다. 4. 상대동탄성계수는 재생골재의 대체율에 따라 60~72%의 범위로 나타내었으며, 재생골재 대체율이 증가할수록 감소하는 경향을 나타내었다. 5. 내구성지수는 모든 배합에서 60이상을 나타내었으나, 재생골재 대체율이 100%일때는 급격히 떨어지는 경향을 나타내었다. 6. 재생굵은골재를 사용한 콘크리트의 압축강도, 중량감소율, 초음파진동속도, 상대동탄성계수, 내구성지수 시험결과를 볼 때, 시험에 사용한 재생굵은골재는 고강도콘크리트에 사용이 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.643-648
• /
• 2002

A research for recycling the demolished-concrete as concrete aggregate has been concerned in all over the world. There, however, are some problems that qualities of recycled aggregates are not only largely different, but also mechanical properties of recycled aggregate concrete decrease a little in comparison with that of natural aggregate concrete. In this study, the resistance of freezing and thawing of concrete using source-concrete recycled aggregate(SRN) and demolished-concrete recycled aggregate(DRA) was investigated. Futhermore a research for improvement of freeze and thaw durability of recycled aggregate concrete was performed. Relative dynamic modulus of elasticity of SRN and DRA recycled aggregate concrete was dropped 60% before 150 of freezing and thawing cycle, and was much lower than that of control concrete. Relative dynamic modulus of elasticity of recycled aggregate concrete was increased to decrease water-cement ratio, but the freeze and thaw durability of recycled aggregate concrete was not enough improved. Futhermore, when metakaolin and silica fume were repalced, the freeze and thaw durability of recycled aggregate concrete containg metakaolin was more improved than that of silica fume.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.63-72
• /
• 2016

PURPOSES : The use of roller-compacted concrete pavement (RCCP) is an environmentally friendly method of construction that utilizes the aggregate interlock effect by means of a hydration reaction and roller compacting, demonstrating a superb structural performance with a relatively small unit water content and unit cement content. However, even if an excellent structural performance was secured through a previous study, the verification research on the environmental load and long-term durability was conducted under unsatisfactory conditions. In order to secure longterm durability, the construction of an appropriate internal air-void structure is required. In this study, a method of improving the long-term durability of RCCP will be suggested by analyzing the internal air-void structure and relevant durability of roller-compacted concrete. METHODS : The method of improving the long-term durability involves measurements of the air content, air voids, and air-spacing factor in RCCP that experiences a change in terms of the kind of air-entraining agent and chemical admixture proportions. This test should be conducted on the basis of test criteria such as ASTM C 457, 672, and KS F 2456. RESULTS : Freezing, thawing, and scaling resistance tests of roller compacted concrete without a chemical admixture showed that it was weak. However, as a result of conducting air entraining (AE) with an AE agent, a large amount of air was distributed with a range of 2~3%, and an air void spacing factor ranging from 200 to $300{\mu}m$ (close to $250{\mu}m$) coming from PCA was secured. Accordingly, the freezing and thawing resistance was improved, with a relative dynamic elastic modulus of more than 80%, and the scaling resistance was improved under the appropriate AE agent content rate. CONCLUSIONS : The long-term durability of RCCP has a direct relationship with the air-void spacing factor, and it can be secured only by ensuring the air void spacing factor through air entraining with the inclusion of an AE agent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.755-760
• /
• 2002

The concrete structures in marine environment has been used type V cement(sulfate-resisting Portland cement), but according to the study results reported recently, the question has been raised for effect of the resistance to salt attack of the concrete using type V cement. It is increased the demands on the use of mineral admixtures such as fly ash, ground granulated blast-furnace slag instead of type V cement in order to improve the durability of concrete structures. Therefore, this study focused on the durability evaluation of concrete containing fly ash under marine environment, and the tests such as salt attack, carbonation, sulfate attack, and freezing-thawing were performed. Test results showed t]hat the resistance to salt attack, sulfate attack and freezing-thawing was improved, and the carbonation was in some disadvantage compared with normal concrete. Nevertheless, the durability of fly ash concrete would be maintained during the service life of structures.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.35-40
• /
• 2010

최근에 들어 투수콘크리트의 동결융해에 대한 저항성이 저하되는 것과 줄눈부에서의 골재박리 등의 많은 문제점들이 대두되고 있다. 따라서 본 연구에서는 기존의 투수콘크리트의 내구성을 향상시키기 위한 방안으로 잔골재와 실리카흄, 고성능감수제를 사용하여 강도 및 내구성 증진 방안을 연구하였다. 주요실험인자로 실리카흄 혼입률 10%와 잔골재 혼입률(0%, 7%, 15%)을 선정하고, 압축강도와 휨강도, 투수계수 및 공극률, 동결융해시험을 수행하였다. 실험결과 강도측면에서는 잔골재 혼입률이 증가함에 따라 압축 및 휨강도는 증가하는 경향을 보였으나, 상대적으로 공극률 감소로 인한 투수성은 저하되고, 동결융해 저항성도 크게 감소하는 것으로 나타났다. 따라서 투수콘크리트에 있어서 강도증진을 위해 사용되는 잔골재는 혼입률 제한이 필요하며, 실리카흄 10%이상을 사용하는 것이 강도 및 내구성 측면에서 효율적인 대안이 될 수 있을 것으로 판단된다.