• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.769-778
• /
• 2017

In this paper, a self-interference signal cancellation(SIC) circult for In-band Full-Duplex has been developed and tested in RF/analog region. By use of this SIC circuit, a FM two-way radio has been developed working at FRS(Family Radio Service) band. The two-way radio device is transmitting the FM modulated signal and demodulating the wanted FM signal at the same time. A circulator is used to enable a single antenna to transmit and receive simuultaenously. The receiver circuit needs to cancel out the self-interference signal due to the transmit signal. A vector modulator(VM) is used to control the phase and magnitude of the esitmated signal. And in-phase and quadrature correlators are used to figure out the optimal coefficients of the VM to remove the self-interference signal according to the change of channel environment. In this work, SA58646 has been used as the FM transceiver, and the system is tested with a frequency of 465 MHz and a bandwidth of 12.5 kHz FM signal. The output power is 17.2 dBm at the antenna port, and the self intererence signal level is measured -49.2 dBm at the receiver end. Therefore the SIC level is measured by 66.4 dB.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.28-36
• /
• 2017

The medium access control (MAC) protocol based on dynamic time division multiple access/time division duplex (TDMA/TDD) is responsible for random access control and radio resource allocation in dynamic traffic environments. These functions of random access and resource allocation are very important to prevent wastage of resources and improve MAC performance according to various network conditions. In this paper, we propose new random access and resource allocation schemes to guarantee quality of service (QoS) and provide priority services in a dynamic TDMA/TDD system. First, for the QoS guarantee, we propose an adaptive random access and resource allocation scheme by introducing an access probability. Second, for providing priority service, we propose a priority-based random access and resource allocation scheme by extending the first adaptive scheme in both a centralized and a distributed manner. The analysis and simulation results show that the proposed MAC protocol outperforms the legacy MAC protocol using a simple binary exponential backoff algorithm, and provides good differential performance according to priorities with respect to the throughput and delay.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.104-114
• /
• 2007

In this paper, an Ad-hoc Routing Protocol that works in wireless Ad-hoc communication networks with multiple radios and multiple channels and that controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, the MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which allows full duplex transmission between wireless Ad-hoc nodes, and reduces intra interference on the route. Also, a fixed channel only for reception at each node enables the estimation of the available bandwidth, which is used to control the call admission for QoS provision. The performance of the MCQosR was verified by simulation.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.519-523
• /
• 2003

This paper describes the communication system of sequencing sorter. Generally sequencing sorter is a machine that sorts mails by delivery order. And designed sequencing sorter is composed of 5 physical modules. So, it is necessary to communicate with each module and to control this communication. A computer called Machine Management Computer, controls this. This paper is about the communication system with MMC and module controllers. This is PC-based, asynchronous full-duplex 4-wire serial systems. 3 protocol layers are presented and stop-and-wait flow control is adopted. Because designed sequencing sorter has to be operated high speed about 27,000 letters per hour, we analyzed the network traffic in the worst case. So, we could find that the communication system has to use above 115,200bps speed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.89-96
• /
• 2009

As increasing the number of digital control devices installed on aircrafts and their transmission speed, various digital data buses have been introduced to provide reliable and high-speed characteristics. These characteristics of avionics data bus are highly related on the fault-tolerant performance which can make minimize jitter and loss during data transfer. In this paper, we concerned about a new traffic shaping scheme for increasing the reliability of Avionics Full Duplex Switched Ethernet (AFDX) systems based on ARINC 664 standard. We note that the conventional AFDX with a single regulator per virtual link system may produce aggregated traffics as the number of virtual links increasing. The aggregated traffic results in large jitters among frames. To remedy for the jitter and loss of data, we propose a dual regulator scheme for the AFDX system. The purpose of the additional regulator is to additionally regulate aggregated traffics from a number of per virtual link regulators. Using NS-2 simulator, we show that the proposed scheme provides a better performance than the single regulator one. It is worthwhile note that the proposed AFDX with Dual Regulator scheme can be employed to not only aircraft networks but other QoS sensitive networks for robot and industrial control systems.

• Journal of Biosystems Engineering
• /
• v.25 no.4
• /
• pp.301-310
• /
• 2000

An autonomous tractor system was developed and its performance was evaluated. The system consisted of a tractor system of and a remote control station. The tractor and the remote control station communicated each other via wireless modems. The tractor had a DGPS(differential global positioning system), sensors, a controller and a modem. The DGPS collected position data and the tractor status was estimated. The information of tractor status and sensors was transferred to the remote control station. Then, the control station determined the control data such as steering angles using a fuzzy controller. The fuzzy controller used the information from the DGPS, sensors, and GIS(geographic information system) data. The control data were obtained by remote signal processing at the control station The control data for autonomous operation were transferred to the tractor controller. The performances of an autonomous tractor were evaluated for various speeds, different initial positions and different initial headings. About 1.3 seconds of time lag was occurred in transferring the tractor status data and the control data. Compensation the time lag, about 27cm deviation was observed at the speed of 0.5m/s and 37cm at the speed of 1m/s. Error caused mainly by the time lag and it would be reduced by developing a full-duplex radio module for controlling the remote tractor.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.54-63
• /
• 2013

In general, multiple hydraulic servo actuators are installed on one control surface of aero-dynamically highly loaded condition aircraft for redundancy management to satisfy flight control safety requirements. If motions of multiple actuators are not synchronized, control surface is deformed from its free stressed state. In result, force fight conditions are generated on each actuator due to restoration reaction force of deformed control surface. In addition, force fight is induced from severe initial rigging tolerance. Force fight condition of multiple actuators affects control accuracies and reduces operational life of actuators and control surface due to fatigue phenomenon. In this study, we designed controller using force feedback to reduce force fight of duplex servo actuation system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.375-381
• /
• 1999

In this study, turbine speed control algorithm is studied for Buk-Jeju steam turbine power plant and also digital governor system is designed for speed control of steam turbine in power plant. By using duplex I/O module, triplex CPU module, 2 out of 3 voting algorithm and adding self diagnostic ability, the reliability of the designed digital governor system can be acquired satisfactorily. Designed and manufactured digital governor system is implemented in a pilot steam turbine plant of 0.3kw output power Installed in Korea Maritime University. After a series of experiment the reliability and availability is confirmed and also stable operation is achieved.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1769-1772
• /
• 2013

A case-control study of the association of miR-499A>G rs3746444 with risk of hepatocellular carcinoma (HCC)was conducted. Patients with HCC and healthy control subjects were recruited for genotyping of miR-499A>G using duplex polymerase-chain-reaction with confronting-two-pair primer(PCR-RFLP) analysis. The MiR-499 GG genotype was associated with a decreased risk of HCC as compared with the miR-499 AA genotype (adjusted OR=0.74, 95%CI=0.24-0.96). Similarly, the GG genotype showed a 0.45-fold decreased HCC risk in a recessive model. The MiR-499 G allele was significantly associated with decreased risk of HCC among patients infected with HBV in a dominant model (OR=0.09, 95%CI= 0.02-0.29). In conclusion, the MiR-499A>G rs3746444 polymorphism is associated with HCC risk in the Chinese population, and may be useful predictive marker for CAD susceptibility.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2298-2300
• /
• 2004

This paper does with the design. implementation, and test of a CRCS for nuclear power plants. Although CRCS is still classified into non-safety class, much attention on its reliability issue has been given so far because of its importance for the stable operation of the reactor in the plant. In terms of technical aspects, our system adopts a full-duplex configuration to enhance reliability in contrast to the existing systems that are all simplex.