• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.471-479
• /
• 2011

This study analyzes flavor ingredients according to types of whisky and maturation periods based on total 40 different types of whisky that are mainly distributed to Korea via imports. Whisky was classified into four categories based on origin, and also into different categories based on maturity period, ingredients such as fusel alcohol, fatty acid, and fatty acid esters and proportion of patterns were analyzed. As a result of an analysis for fusel alcohol, high qualified types of alcohol including 3-methylbutanol, 2-methylbutanol, iso-butanol, and 1-propanol were detected from all Scotch whiskys, America whiskys, and Canadian whiskys. In particular, the proportional sum of 3-methylbutanol and 2-methylbutanol, and the sum of 3-methylbutanol and 2-methylbutanol/iso-butanol were regarded as core factors to determine each type of whisky. Acetaldehyde, ethyl acetate, and acetic acid increased as maturation and storage period became longer. As a result of the fatty acid and fatty acid ethyl ester analysis, the major fatty acids were dodecanoic acid and decanoic acid, both with detection of octanoic acid and hexanoic acid. However, dodecanoic acid, decanoic acid, and octanoic acid were lower than the detectable limit in American and Canadian whiskys, showing a unique phenomenon that hexanoic acid was detected only in very small amounts. Malt Scotch whisky showed higher significance than blended Scotch whisky, making it possible to classify types of whisky. Fatty acid ethyl ester contents showed significance with fatty acid either. In addition, changes in the whiskys based on maturation period were confirmed via proportions of fatty acids and fatty acid ethyl esters. In general, the proportion of fatty acids and fatty acid ethyl esters decreased as the storage period increased. This study provided basic data to classify types of whisky based on maturation periods by analyzing the proportion of flavor ingredients such as fusel alcohols, fatty acids, and fatty acid ethyl esters.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.545-552
• /
• 1991

A mercury ion-sensitive carbon-paste electrode (CPE) was constructed with l-sparteine. Mercury (II) ion was chemically deposited by the complexation with l-sparteine onto the CPE. The surface of CPEs was characterized by cyclic voltammetry and anodic stripping voltammetry in an acetate buffer solution, separately. Exposure of CPEs to acid solution could regenerate surface and reuse it for deposition. In 5 deposition/measurement/regeneration cycle, the response was reproducible and in licnear up to $2.0\;{\times}\;10^{-6}$ M with linear sweep voltammetry. In case of using the differential pulse technique, we have obtained the linear response up to $7.0 {\times}10^{-7}$ M with relative standard deviation of ${\pm}5.1$%. The detection limit was $5.0{\times}10^{-7}$ M for 20 minutes of the deposition. We have investigated the interference effect of various metal ions, which are expected to form the complex with ligand. Silver (I) ion of these has interfered with the analysis of Hg (II) ions. However, pretreatment of the silver (I) ion with potassium chloride led to no interference on the analysis of mercury ions in aqueous solution.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.404-415
• /
• 2000

This paper describes several performances and nondestructive inspection for deterioration due to forest fires in overhead transmission lines. After discussing corrosion mechanism such as atmospheric and galvanic corrosion for aged ACSR conductors and its detection for them are presented. Through impedance analysis of a solenoid coil, it is shown that the eddy current sensor may be available to inspect severe fault or local corrosion. As the solenoid coil changes its impedance when the test conductor is inserted into the coil, it can be possible to measure deterioration degree caused by forest fires. Tensile strength, extension rate and sensor impedance are tested for some samples degraded by artificial fire. As increasing blazed period to some extent, the strength of aluminum strand begins to be reduced remarkably, while galvanized steel strand holds the similar strength to the initial value, despite of appearing a little loss of zinc layer. In general, it is shown that the sensor impedance would be increased while the tension load of conductor is reduced and the extension rate is contrarily increased. Therefore, the sensor output could exhibit the changes of mechanical performances, and would be used to detect such deterioration caused by forest fire in ACSR conductors built on the ridge of mountains. Finally, it was verified that the solenoid coil could be applicable to obtain any crucial inform for serious deterioration due to forest fires.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.303-308
• /
• 2015

BACKGROUND: Recently, various rice by milling degree is sold for health and taste. To provide safe food to consumers, it is need to know the change of heavy metal contents according to milling degree of rice.METHODS AND RESULTS: This study was to investigate residual the levels of cadmium (Cd), lead (Pb), copper (Cu) and zinc (Zn) as stated in the milling degree of the rice contaminated Cd and Pb from 2011 to 2012 in Chungcheongnam-do. Rice samples exceeded the maximum residue limits (MRL) of Cd and Pb were milled by five degrees (0.0, 2.45, 8.02, 10.48, 15.09%). Milled rice was digested by microwave method, and analyzed heavy metal contents using ICP-OES. Recovery ratios of 4 heavy metals such as Cd, Pb, Cu and Zn were ranged for 79.7-98.9%, and limits of detection (LOD) and limits of quantitation (LOQ) were fulfilled with the normal analytical standards. Concentrations of Cd, Pb, Cu and Zn were ranged 0.416-0.433 mg/kg, 0.183-0.26 mg/kg, 3.639- 3.882 mg/kg and 16.868-19.801 mg/kg, respectively.CONCLUSION: From these results, conforming with increase of milling degree of rice, Cd, Pb, Cu, and Zn contents tended to decrease. The contents of heavy metals were decreased 3.1% in Cd, 29.3% in Pb, 6.4% in Cu and 15.1% in Zn, in according to the highest milling degree of 15.09%.

• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.193-199
• /
• 2018

In this study, PAT protein of genetically modified maize was prepared from the recombinant E. coli strain BL21 (DE3), and mice were immunized with the recombinant PAT protein. After cell fusion and cloning, two hybridoma cells (PATmAb-7 and PATmAb-12) were chosen since the monoclonal antibodies (Mabs) produced by them were confirmed to be specific to PAT protein in the indirect enzyme-linked immunsorbent assay (ELISA) and western blot tests. There were no cross-reactions of either Mabs to other GM proteins or to the extracts of non-GM maize. The ELISA based on the PATmAb-7 can sensitively detect 0.3 ng/g PAT protein in corn. These results indicate that the developed Mabs can be used as bio-receptors in the development of immunosensors and biosensors for the rapid and simple detection of GM corn adulterated in foods.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1006-1013
• /
• 2006

To High Throughput Screening (HTS), a homogeneous fluorescence polarization immunoassay (FPIA) was developed for the quantitative determination of ochratoxin A(OTA) using a $Victor^3$ (PerkinElmer). The homologous tracer, fluorescein-labelled OTA-EDF were synthesized and a specific OTA antibody has been used in the development of the method. It allowed the determination of OTA in the concentration range 0.5-200 ng/ml, with the detection limit of 0.3 ng/ml. The method developed was highly specific and reproducible. OTA spikes in unpolished rice extracts were determinable by FPIA with good recovery. For naturally contaminated unpolished rice samples some disagreement was observed between the results obtained by FPIA and HPLC, which could be related to the a little matrix effect observed for FPIA. Further research is needed to validate the procedure. On the basis of these initial results, this FPIA appears to meet the performance criteria for OTA screening of food samples without a complicated clean-up.

• Journal of the Korean Chemical Society
• /
• v.37 no.10
• /
• pp.881-887
• /
• 1993

A cobalt(II) ion-selective carbon-paste electrode (CPE) was constructed with ${\iota}$-sparteine. Cobalt(II) ion in aqueous solution was chemically deposited through the complexation with ${\iota}$-sparteine onto the CPE. The surface of CPEs were characterized by cyclic voltammetry and differential pulse voltammetry in an acetate buffer solution, separately. Exposure of the CPEs to an acid solution could regenerate surface to reuse it for the deposition. In more than 5 deposition / measurement / regeneration cycles, the response was reproducible and linear up to $5.0{\times}10^{-6}$M with linear sweep voltammetry. The peaks at 0.17V / 0.27V were correspond to the redox of Co(II)-SP complex deposited on CPE. The anodic peak of which appeared after scan over the cathodic peak of 0.17 V to more negative scan. In case of using the differencial pulse voltammetry (DPV), we have obtained the linear response $2.0{\times}10^{-7}$M with relative standard deviation ${\pm}5.6%$. The detection limit was $1.0{times}10^{-7}$M for 20 minutes of the deposition. We have also investigated the interference effect of various metal ions, which are expected to form the complex with the ligand on the electrode.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.341-346
• /
• 1996

Electrochemical determination of iodide was carried out by stripping voltammetry with a $(Cin)Cu(NO_3)_2$ modified-carbon paste electrode. Iodide was coordinated onto the electrode surface containing $(Cin)Cu(NO_3)_2$ via ion exchange. The oxidation peak potential of incorporated iodide was ＋0.72 V. The optimum analytical conditions for the determination of iodide were investigated using linear sweep voltammetry. Optimum conditions for the electrochemical determination of iodide were as follows: i) A predeposition solution was 0.1 M $KNO_3.$ ii) The deposition time was 10 min. iii) The composition of the electrode was 40% (w/w). The detection limit for iodide was $1.0{\times}10^{-6}M$ and the relative standard deviation was ${\pm}5.5%\;in\;2.0{\times}10^{-5}M$(four repetitions). The interference effect of other anions were also investigated. $Cl^-,\;Br^-,\;C_2O_4^{2-},\;and\;ClO_4^-$ ions do not interfere for the determination of iodide. When $SCN^-$ was added to the deposition solution, the oxidation peak current of iodide ion was decreased roughly 32%.

• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.199-204
• /
• 2006

Streptococcosis of olive flounder(Paralichthys olivaceus) is an important bacterial disease in Jeju island. In this study, we investigated monthly infection pattern of this disease in different size of the flounder fish. Even though the disease occurred throughout the year, the infection ratio was relatively higher in the months with warm water season. The infection was more prevalent in adult flounder over 30 cm total length compare to these of small size fish. Two infectious species of streptococcosis pathogens were detected by multiplex PCR assay. Detection ratios of Streptococcus iniae and S. parauberis reached up to 46% and 54%, respectively, from June 2003 to May 2005 in Jeju island. S. iniae occurred intensively from September to October, whereas S. parauberis reported from March to May. S. iniae and S. parauberis infections of cultured flounder share some common features, but clinical findings showed considerable differences between two diseases. Distended abdomen, protruded anus and ascitic fluid in the peritoneal cavity are evident lesions detected in S. iniae infection, whereas, flounders infected by S. parauberis showed prominent lesions such as darkened surface and haemorrhaging in the non-ocular side. Both streptococcosis pathogens were sensitive to antibiotics, such as ampicillin and amoxicillin. However, S. iniae strains were more sensitive to doxycycline, erythromycin and oxytetracycline than S. parauberis strains.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.2 s.20
• /
• pp.203-212
• /
• 1986

Hypertension is one of the most well known risk factors for cerebrovascular or coronary heart disease and is a major public health problem. Early detection and treatment of hypertension are essential, but the compliance of treatment on hypertension is not easy to achive. Hypertensive workers are being detected by the annual screening under the Labour Standard Law in Korea but the solidified control system for them is not existing. This study about workers 'Motive-Belief-Action in non-drug and drug treatment of their hypertension would be worthwhile to interpret how the workers actually behave in coping with hypertension, and also would be advisable to construct the follow-up program in Korea. In the field research process two criteria were used to select sample group. The first criterion included the workers who were screened to be hypertensive with their blood pressure above 160/95 in this survey. The second one was used to classify study-group respondents who had known their hypertension by successive annual screening. From such criteria a total of 156 male workers were sampled in 21 industries, the author interviewed them using the structured questionnaire which consisted of Belief-Motive-Action items about non-drug and drug treatment for hypertension with open-ended question on symptom of hypertension. The summary is as follows: 1) Sixty-one percent of respondents had ever checked their blood pressure somewhere besides the annual screening. 2) Most respondents(97.2%) complained no symptoms of hypertension at all. 3) Belief level of non-drug treatment was relatively high (82.1%-64.7%), but motive(55.1%-28.2%) and action(38.5%-16.7%) levels were low. 4) Belief level of drug treatment was relatively lower than that of non-drug treatment, blue collar workers showed higher artier level of drug treatment than white collar workers, and correlation coefficient between belief and motive on drug treatment was lower in group of not-recognizing their family history of hypertension than recognized group. Such findings indicated that belief on drug treatment of hypertensive workers would be problematic. 5) White collar workers showed significant lower correlation coefficients between Motive and Action of salt restriction, restriction of fatty diet and relaxation than blue collar workers. 6) Mild hypertension group showed low levels of Motive and Action of non-drug treatment(salt restriction, restriction of fatty diet and relaxation) and also showed low correlation coefficient between Belief and Motive of above non-drug treatment.