• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.24-29
• /
• 2001

In this paper, the wideband microstrip antennas for the PCS & IMT-200O dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfies the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS & IMT-2OO0 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS & IMT-20O0 base station antenna.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.163-166
• /
• 2014

A microstrip dual-wideband bandpass filter using a multimode resonator (MMR) is proposed in this letter. The proposed MMR loaded with a T-shaped open-ended stub and a short-ended stub exhibits triple mode characteristics, and a synthesis method is developed to illustrate the wide passband with independently controllable center frequencies and bandwidths. To verify this design methodology, a dual-wideband filter with fractional bandwidths of 19.1% and 27.9% is designed and fabricated. The measured results agree with the simulations.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.84-89
• /
• 2017

This paper presents a dual-wideband bandpass filter (BPF) with high band-to-band isolation and skirt selectivity using distributed composite right/left-handed (CRLH) transmission line (TL) quad-mode resonators (QMRs). The results of the proposed distributed CRLH TL unit cell analysis are used to establish the scattering parameters and the resonance frequencies of the QMR constituting the dual-wideband BPF. A novel dual-wideband bandpass filter is designed and fabricated, using the derived scattering characteristics. The measured results show that the fabricated dual-wideband bandpass filter has an insertion loss of less than 1.08dB in the lower band, and of 2.01dB in the upper band, a bandwidth of 2.8-5.52GHz and 9.68-12.26GHz, and a band-to-band isolation of more than 38dB, from 6.34-8.42GHz.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.230-233
• /
• 2003

In this paper, the wideband microstrip patch antennas for the Personal communications Service $(PCS\;:\;1750\~1870\;MHz)$ and International Mobile Telecommunications-2000 $(IMT-2000\;:\;1920\~2170\;MHz)$ dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfied the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS and IMT-2000 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS & IMT-2000 base station antenna. An impedance bandwidth of $31\%(VSWR<1.5,\;615\;MHz)$ and a maximum gain of 7dBi can be achieved. The radiation pattern is stable across the passband.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2004

In this paper, the wideband microstrip patch antennas for the Personal communications Service (PCS : 1750∼1870 MHz) and International Mobile Telecommunications-2000 (IMT-2000 : 1920∼2170 MHz) dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfied the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS and IMT-2000 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS ＆ IMT-2000 base station antenna. An impedance bandwidth of 33% (VSWR<1.5, 650 GHz) and a maximum gain of 7dB can be achieved. The radiation pattern is stable across the passband.

• ETRI Journal
• /
• v.39 no.5
• /
• pp.756-763
• /
• 2017

A switchable single-wideband (SWB)-to-dual-wideband (DWB) bandpass filter (BPF), which is realized by using lumped switches, is presented in this paper. By alternating the operation modes-ON and OFF-in which the ON mode is achieved by placing the capacitors at the switching spots and the OFF mode is achieved by replacing the capacitors with inductors, DWB-to-SWB BPF can be achieved on the same device. In addition, by changing the capacitor values, the center frequency (CF) of the lower passband of DWB BPF can be easily tuned from 1.69 GHz to 2.22 GHz, while the higher passband stays almost unchanged. As an example, an SWB-to-DWB BPF is designed, fabricated, and measured. This BPF exhibits good performance including wideband, high isolation, compact size, and ability to switch.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.205-208
• /
• 2004

In this paper, we analyzed the performance of SDR-based dual-band CDMA system in wideband multipath channel employing RAKE receiver with MRC diversity. For the simulation of SDR-based dual-band CDMA system, we used digital IF techniques, polyphase analysis filter bank as channelizer. Also, Remez exchange algorithm is employed in the realization of the digital filter in the polyphase analysis filter bank. For performance analysis of dual-band CDMA system, we consider power loss of IF signal after passing through channel and the filter. Also, the performance for different sampling rates is analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.243-250
• /
• 2002

This paper designed a compact printed meandered scot antenna which to integrate in wireless LAN and proposed a printed dual meandered slot antenna for improving bandwidth. A printed dual meandered slot antenna is calculated by using the mehtod of FDTD. The calculated results showed good agreement with the measured results. As a result of measurement, the bandwidth(VSWR< 2) of single meandered slot antenna is 115 MHz and the bandwidth of dual meandered slot antenna is 164 MHz. The dual meandered slot antenna bandwidth has been improves to that of 43% comparing to single meandered slot antenna.

• Journal of electromagnetic engineering and science
• /
• v.13 no.2
• /
• pp.104-112
• /
• 2013

A novel miniaturized artificial magnetic conductor (AMC) is proposed for dual-band operation. An AMC unit cell that employs four slots in the metallic patch is used to achieve miniaturization as well as easy control of the second/first resonant frequency ratio, which can be varied from 1.5 to 3.26 by simply changing the slot shape for a given metallic patch size. A dual-band antenna composed of a wideband monopole suspended over the proposed AMC surface is designed and tested to validate this approach. The measurements result in a satisfactory and good matching condition for the dual-band antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.379-387
• /
• 2000

In this paper, to transmit and receive the differently polarized wideband signals simultaneously with a single antenna system, the wideband, dual-frequency and dual-polarized(WDFDP) microstrip array antenna is proposed and designed. This antenna operates simultaneously at 14.25 GHz and 12.50 GHz. To extend to two dimensional array, microstrip feed line and coaxial probe through via-hole are used. The experimental results show that the proposed WDFDP microstrip antenna can be used in the compact portable terminals with a single antenna system and the characteristic of the resonators in this antenna produces a greatly enhanced bandwidth.