• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1015-1026
• /
• 2018

A family of dual-DC-input (DI) dual-buck inverters (DBIs) is proposed by employing a DI switching cell as the input of traditional DBIs. Three power ports, i.e. a low voltage DC input port, a high voltage DC input port and an AC output port, are provided by the proposed DI-DBIs. A low voltage DC source, whose voltage is lower than the peak amplitude of the AC side voltage, can be directly connected to the DI-DBI. This supplies power to the AC side in single-stage power conversion. When compared with traditional DBI-based two-stage DC/AC power systems, the conversion stages are reduced, and the power rating and power losses of the front-end Boost converter of the DI-DBI are reduced. In addition, five voltage-levels are generated with the help of the two DC input ports, which is a benefit in terms of reducing the voltage stresses and switching losses of switches. The topology derivation method, operation principles, modulation strategy and characteristics of the proposed inverter are analyzed in-depth. Experimental results are provided to verify the effectiveness and feasibility of the proposed DI-DBIs.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.555-562
• /
• 2009

컨테이너 터미널의 주요 생산성 지표는 안벽에서의 작업 효율성이라 할 수 있다. 안벽에서는 Q/C(Quay Crane)이라는 장비가 접안 선박의 컨테이너를 하역한다. Q/C의 작업 생산성을 높이기 위해서는 좀 더 효율적인 Y/T(Yard Tractor)운영 방식이 필요하다. 기존 작업 방식(싱글 사이클)에서는 양하작업 이후 적하 작업이 이루어진다. 듀얼 사이클이란 양하작업과 적하 작업을 동시에 함으로써 안벽 생산성과 야드 트랙터의 이용률을 높이는 방법이다. 터미널에서 듀얼 사이클의 도입은 추가적인 장비의 도입 없이 운영에서의 변화만을 요구한다. 즉, 기존의 dedicate 시스템에서 pooling 시스템으로의 변화가 필요하다. 본 논문에서는 듀얼 사이클을 이용하는 항만에서의 작업 효율성을 증대시키기 위한 선적 계획 방법을 제시하고자 한다. 이 문제를 풀기위해 유전 알고리즘과 타부서치를 제시하였다.

• 한국항해항만학회지
• /
• 제33권5호
• /
• pp.331-337
• /
• 2009

컨테이너 크레인은 컨테이너터미널에서 사용되는 주요 장비면서 컨테이너 크레인의 효율은 컨테이너터미널의 생산성을 결정한다. 컨테이너 크레인의 전형적인 유형은 싱글 트롤리를 가지고 있으며 진보된 유형들 중의 하나가 듀얼 트롤리형이다. 본 논문의 목적은 컨테이너 터미널에서 듀얼 트를리형 컨테이너 크레인의 버퍼 사이즈를 분석하는 것이다. 듀얼 트롤리형 컨테이너 크레인의 버퍼 공간을 분석하기 위한 시뮬레이션 모델을 소개한다. 버퍼 공간은 해측의 메인 트롤리와 야드측의 세컨 트롤리 사이에 위치한다. 요구 생산성을 추정하기 위해 다양한 시뮬레이션 실험을 수행하여 버퍼 사이즈를 분석한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.167-172
• /
• 1996

A Dual Mass Flywheel system is a evolution to the reduction of torsional vibration and impact noise occuring in powertrain when a vehicle is eit-her moving or idling. The name already explains what it is : The mass of the conventional single mass flywheel is divided. One section continues to belong to the mass moment of inertia of the engine-side. The ot-her section increass the mass moment of inertia of the transmission-side. The two masses are connected via a spring /damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984 Dual Mass Flywheel has been de-veloped again and again. But the prosidures of de-velopment of D.M.F system didn't have had differe-nce from conventional clutch system's trial and err-or This paper presents the method for systematical design of D.M.F system with demensionless design variables of D.M.F system mass ratio between two flywheels λ. natual frequency rate of two flywheel s, ${\gamma}$and viscosity coefficient ζ. And experimental re-sults are used to prove these theoretical results.

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.174-178
• /
• 2015

We studied emission characteristics for blue fluorescent dual-side emission OLED with Al cathode thickness variation. In the bottom emission OLED of Al cathode with 10, 15, 20, 25, 30, and 150 nm thickness, maximum luminance showed 36.1, 8,130, 9,300, 12,000, 13,000, and $12,890cd/m^2$, and maximum current efficiency showed 2, 8.8, 10, 10.5, 10.8, and 11.4 cd/A, respectively. The emission characteristics of the bottom emission seemed to be improved according to decrease of resistance as the thickness of Al cathode increase. In the top emission OLED of Al cathode with 10, 15, 20, 25, and 30 nm thickness, maximum luminance showed 4.3, 351, 131, 88.6, and $33.2cd/m^2$, and maximum current efficiency showed 0.23, 0.38, 0.21, 0.16, and 0.09 cd/A, respectively. It yielded the highest maximum luminance and maximum current efficiency in Al cathode thickness 15 nm. It showed a tendency to decrease as the thickness of Al cathode increase. The reason for this is due to decrease of transmittance with increasing of Al cathode thickness. The electroluminescent spectra of bottom and top emission OLED were not change.

• Structural Engineering and Mechanics
• /
• 제6권2호
• /
• pp.125-141
• /
• 1998

Recent test results of steel moment connections repaired with a haunch on the bottom side of the beam have been shown to be a very promising solution to enhancing the seismic performance of steel moment-resisting frames. Yet, little is known about the effects of using such a repair scheme on the global seismic response of structures. When haunches are incorporated in a steel moment frame, the response prediction is complicated by the presence of "dual" panel zones. To investigate the effects of a repair on seismic performance, a case study was conducted for a 13-story steel frame damaged during the 1994 Northridge earthquake. It was assumed that only those locations with reported damage would be repaired with haunches. A new analytical modeling technique for the dual panel zone developed by the author was incorporated in the analysis. Modeling the dual panel zone was among the most significant consideration in the analyses. Both the inelastic static and dynamic analyses did not indicate detrimental side effects resulting from the repair. As a result of the increased strength in dual panel zones, yielding in these locations were eliminated and larger plastic rotation demand occurred in the beams next to the shallow end of the haunches. Nevertheless, the beam plastic rotation demand produced by the Sylmar record of 1994 Northridge earthquake was still limited to 0.017 radians. The repair resulted in a minor increase in earthquake energy input. In the original structure, the panel zones should dissipate about 80% (for the Oxnard record) and 70% (for the Sylmar record) of the absorbed energy, assuming no brittle failure of moment connections. After repair, the energy dissipated in the panel zones and beams were about equal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.41-44
• /
• 1998

Dual mode resonators were fabricated using high temperature superconductor. The deposited material was $Y_1Ba_2Cu_3O_{7-x}$(YBCO) on MgO(100) substrate using pulsed laser deposition. Dual mode resonators were patterned by standard photolithography process and wet etching. At the back-side of the substrate, the ground plane with the metal layer of Ti and Ag was fabricated. The transition temperatures of YBCO films were 85-88 K, and network analyzer was used for testing the performance of the resonators. The input/output feedline angles of each resonator were $60^{\circ}$and $100^{\circ}$. The resonant frequency of resonators was 10 GHz. In this paper, dual mode resonator was fabricated for the application of satellite communication.

• 한국의류학회지
• /
• 제39권4호
• /
• pp.560-575
• /
• 2015

This study developed brassieres using a suspension system with the elastic panel on the inside of the brassiere cup to replace the wires for 20s women with large and elongated breasts. The following results were obtained by analyzing clothing pressure and a subjective evaluation of brassieres with elastic panels at the bottom or side of the various reduction ratios and with the shoulder straps of the brassiere. Brassieres with dual panels (rather than with only the bottom panel) lowered clothing pressure as well as improved wearing comfort and function. Compared to brassieres with a panel of 10%, brassieres with a panel of 15% lowered clothing pressure and provided superior wearing comfort. In this case, the higher the reduction ratio of the side panels increased clothing pressure on the shoulder, but provided superior well-fit, bust-up, and vibration restraint. To reduce the reduction ratio of the side panel decreased clothing pressure on the shoulder and decreased support functions. Therefore, the reduction ratio of the side panels should be determined by preferable functions such as wearing comfort that depend on the needs of the wearer. It is suggested that a brassiere with a dual elastic panel can replace the brassiere wire.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.83-90
• /
• 2016

이중 모드 램젯 엔진 모델의 램젯 모드 연소 시험을 수행하였다. 엔진 모델은 흡입구, 연소기 및 노즐로 이루어졌다. 로켓 기반 복합 사이클 엔진에 사용하는 것을 전제로 큰 후향 계단을 가지는 형상을 선택하였다. 시험은 마하 5, 고도 24 km 조건에서 수행하였다. 연료를 카울면과 바닥면에 분산하여 다중 분사를 한 경우에 안정적인 연소를 달성할 수 있었다. 또한 연료 당량비를 카울면에서 0.5, 바닥면에서 0.5로 하여 총 당량비 1.0으로 한 경우에 연소기 내부에서 열질식이 발생하여 유동이 아음속으로 조성되는 램젯 모드로 운전됨을 확인하였다.

• 정보보호학회논문지
• /
• 제26권6호
• /
• pp.1443-1454
• /
• 2016

하드웨어 기반의 Dual-rail Logic 스타일을 소프트웨어로 구현한 밸런스 인코딩 기법은 추가적인 저장 공간이 필요 없는 효과적인 부채널 분석 대응방법이다. 밸런스 인코딩 기법을 이용하여 암호 알고리즘을 구현하면 암호 알고리즘이 연산되는 동안 입력 값에 상관없이 비밀 정보를 포함하고 있는 중간 값은 항상 일정한 해밍 웨이트 및 해밍 디스턴스를 유지하게 되어 부채널 분석을 어렵게 만드는 효과가 있다. 그러나 기존 연구에서는 밸런스 인코딩 기법을 적용한 Constant XOR 연산만 제안되어 있어 PRINCE와 같이 XOR 연산만으로 구성이 가능한 암호 알고리즘에만 적용이 가능하다는 제한사항이 있다. 따라서 본 논문에서는 ARX 구조 기반의 다양한 대칭키 암호 알고리즘에도 적용이 가능하고, 효율적인 메모리 관리를 위해 Look-up table을 사용하지 않는 새로운 Constant AND, Constant Shift 연산 알고리즘을 최초로 제안하였으며, 상호 정보량 분석을 통해 안전성을 확인하였다.