• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.815-824
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권4호
• /
• pp.192-197
• /
• 2009

This paper presents the design and measurement of a 2.4/5.2-GHz dual band VCO with a balanced frequency doubler in $0.18\;{\mu}m$ CMOS process. The topology of a 2.4 GHz VCO is a cross-coupled VCO with a LC tank and the frequency of the VCO is doubled by a frequency balanced doubler for a 5.2 GHz VCO. The gate bias matching network for class B operation in the balanced doubler is adopted to obtain as much power at 2nd harmonic output as possible. The average output powers of the 2.4 GHz and 5.2 GHz VCOs are -12 dBm and -13 dBm, respectively, the doubled VCO has fundamental harmonic suppression of -25 dB. The measured phase noises at 5 MHz frequency offset are -123 dBc /Hz from 2.6 GHz and -118 dBc /Hz from 5.1 GHz. The total size of the dual band VCO is $1.0\;mm{\times}0.9\;mm$ including pads.

• 한국전자파학회논문지
• /
• 제29권1호
• /
• pp.1-9
• /
• 2018

본 논문에서는 건물 내 무선 통신환경 개선을 위한 필름형 이중 대역 주파수 선택 구조를 제안하였다. 제안한 주파수 선택 구조는 간단한 설계 변수를 통해 2.4 GHz와 5 GHz 이중 대역의 공진 주파수를 제어할 수 있는 소형화된 구조로 얇은 투명 필름 위에 스크린 프린팅 방식을 사용하여 설계 및 제작하였으며, 측정을 통해 성능을 확인하였다. 건물 내에 전파환경 성능 분석이 가능한 소프트웨어를 사용하여 설계한 FSS 구조를 건물에 적용했을 때 실외로부터 유입되는 불요신호에 대한 감쇠 성능을 분석하였다. 또한 분석 결과를 검증하기 위하여 실제 건물 내벽에 제작한 FSS 필름을 적용하여 실내 환경의 신호강도를 측정하였다. 측정결과 제작된 이중 대역 주파수 선택 구조는 실제 건축물에 적용할 경우 2.4 GHz와 5 GHz 대역에서 각각 29.4 dB, 15.94 dB의 감쇠 성능을 가짐을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3039-3045
• /
• 2013

Dual-frequency ultrasound assisted photocatalysis (DUAP) method was proposed to degrade a stable organic model effluent, cresol red (CR), using the prepared $Fe^{3+}$-doped $TiO_2$ with active carbon fiber loading ($Fe^{3+}-TiO_2/ACF$) as photocatalyst. The influence of key factors, including Fe doping amount and power density of dual-frequency ultrasounds (20/40 kHz), on the degradation efficiency was investigated. The degradation efficiency rises to 98.7% in 60 min accompanied by the color removal of CR liquid samples from yellow to colorless transparent at optimal conditions. A synergy index of 1.40 was yielded by comparison with single ultrasound assisted photocatalysis (SUAP) and the photocatalysis without ultrasound assisted (UV/$TiO_2$), indicating that a clear synergistic effect exists for the DUAP process. Obvious enhancement of degradation efficiency for the DUAP process should be attributed to production of large amount of free radicals by strong cavitational effects of dual ultrasounds.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.93-103
• /
• 2013

This paper presented a novel approach for the design of a tunable dual-band bandpass filter (BPF) with independently tunable passband center frequencies and bandwidths. The newly proposed dual-band filter principally comprised two dual-mode single band filters using common input/output lines. Each single BPF was realized using a varactor-loaded transmission line resonator. To suppress the harmonics over a broad bandwidth, a defected ground structure was used at the input/output feeding lines. From the experimental results, it was found that the proposed filter exhibited the first passband center frequency tunable range from 1.48 to 1.8 GHz with a 3-dB fractional bandwidth (FBW) variation from 5.76% to 8.55%, while the second passband center's frequency tunable range was 2.40 to 2.88 GHz with a 3-dB FBW variation from 8.28% to 12.42%. The measured results of the proposed filters showed a rejection level of 19 dB up to more than 10 times the highest center frequency of the first passband.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.886-894
• /
• 2012

This paper presents a secondary-side, dual-mode feedback LLC resonant controller IC with dynamic PWM dimming for LED backlight units. In order to reduce the cost, master and slave outputs can be generated simultaneously with a single LLC resonant core based on dual-mode feedback topologies. Pulse Frequency Modulation (PFM) and Pulse Width Modulation (PWM) schemes are used for the master stage and slave stage, respectively. In order to guarantee the correct dual feedback operation, Phased-Locked Loop (PLL)-based automatic duty control circuit is proposed in this paper. The chip is fabricated using $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology, and the die size is $2.5mm{\times}2.5mm$. The frequency of the gate driver (GDA/GDB) in the clock generator ranges from 50 to 425 kHz. The current consumption of the LLC resonant controller IC is 40 mA for a 100 kHz operation frequency using a 15 V supply. The duty ratio of the slave stage can be controlled from 40% to 60% independent of the frequency of the master stage.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.163-166
• /
• 1999

In this paper, frequency synthesizer that can be used in IMT-2000 was designed and fabricated using dual loop PLL(Phase Locked Loop). For improving phase noise characteristic Voltage Controlled Oscillator was fabricated using coaxial resonator and eliminated frequency divider using SPD as phase detector and increased open loop gain. Fabricated frequency synthesizer had 1.82㎓ center frequency, 160MHz tuning range and -119.73㏈c/Hz low phase noise characteristic.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.124-128
• /
• 2009

본 논문에서는 Metamaterial 전송선을 이용한 이중 대역 저지 필터를 제안하고 제작, 측정하였다. 이는 Wilkinson Power Divider의 형태를 바탕으로, 입력 단자에 신호를 인가하면 동일한 크기와 위상을 갖는 신호로 나눠진다. 이를 각각의 전송선에서 CRLH(Composite Right/Left-Handed) 구조와 D-CRLH(Dual Composite Right/Left-Handed) 구조를 이용하여 위상 변화를 유도한다. 본 논문에서는 TDMB 주파수 대역인 195 MHz와 DVB-T/H 주파수 대역인 670 MHz 대역에 대해 저지 대역 특성을 유도하였다. 이를 통해 제작한 필터의 크기는 $30{\times}15\;mm$ 이며, -10 dB를 기준으로 대역폭을 측정한 결과 각각의 주파수 대역에서 73 %, 50 %의 결과를 얻을 수 있었다.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1229-1235
• /
• 1995

In this paper an elliptic response dual-mode 4-pole bandpass filter was designed, manu-factured, and tested. A dual-mode filter having two stages cascaded double-tuned cavities which are resonant in two independent orthogonal TE113 circular-cavity modes and provide a bandpass response. A 4-pole dual-mode elliptic function bandpass filter has a center frequency of 14.022 GHz with a bandwidth of 36 MHz which is the first channel of the KOREASAT up-link frequency. The measured experimental results of a dual-mode filter are 1 dB insertion loss in the passband and 20 dB out-of-rejection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.435-436
• /
• 2008

This paper presents a dual band frequency synthesizer for GSM and Wideband CDMA which is designed in a standard 0.13um CMOS 1P6M process. The shared components include phase frequency detector (PFD), charge pump (CP), loop filter, integer frequency divider(128/129 DMP, 4bit PC, 3bit SC) and Low noise Ring-VCO. A high-speed low power dual modulus prescaler is proposed to operate up to 2.1GHz at 3.3V supply voltage with 2mW power consumption by simulation. The simulated phase noise of VCO is -101dBc/Hz at 200kHz offset frequency from 1.9GHz.