• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.201-204
• /
• 2007

In this paper, fully embedded and miniaturized diplexer device has been developed and characterized for dual-band/mode CDMA handset applications. The size of the embedded diplexer is significantly reduced by embedding high Q circular spiral inductors and high DK MIM capacitors into a low cost organic package substrate. The fabricated diplexer has insertion losses and isolations of -0.5 and -23 dB at 824-894 MHz and -0.7 and -22 dB at 1850-1990 MHz, respectively. Its size is $3.9mm{\times}3.9mm{\times}0.77mm$. The fabricated diplexer is the smallest one which is fully embedded into a low cost organic package substrate.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.62-68
• /
• 2001

In this paper it is proposed an advanced modified sliding mode control of a rotor field oriented control of induction motor. The application of this unconventional control has very good results, such as disturbance rejection and nice dynamic properties. Stability can be guaranteed even in the worst situation. A conventional "sliding mode" controller is characterised by fast switching control signal, which causes the chattering of the drive system. To overcome this problem, a modified law is used, by introducing a hysteresis band and a continuous control, which modifies the conventional law. The control is accomplished with dual TMS320C44 floating-point digital signal processor. The validity of the proposed method was verified by experiment on the propulsion system simulator, used for the development of Korean High-Speed Railway Train(KHSRT).in(KHSRT).

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.195-198
• /
• 2006

본 논문에서는 휴대용 무선통신기기에 장착해서 사용가능한 이중대역(RFID(908.5-914), PCS) 소형 내장형 RFID 안테나를 설계하였다. 안테나 디자인은 PIFA(Planar Inverted-F Antenna)이며 기존 안테나 아래쪽에 접지와 연결된 패턴을 추가하여 결합성분을 유도하여 소형화 하였으며 표면 전류분포를 분산시켜 SAR를 개선하는 방법을 제시 하였다. 시뮬레이션 결과에 따라 안테나가 실제 제작 되고 측정되었다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.448-454
• /
• 2004

In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -l0dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB thoughout each band.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2291-2293
• /
• 2005

본 논문에서는 평면 역F 안테나(PIFA)형태의 단일 안테나로 2GHz 대역과 5GHz 대역의 무선 근거리통신망의 주파수 대역을 수용할 수 있는 안테나를 설계 제작하였다. 안테나의 크기를 줄이기 위해 안테나 Element는 Meander Line을 이용하여 설계하였다. 측정 시 반사손실 10dB(VSWR=2.0)를 기준으로 2GHz 대역에서 10.8%와 5GHz대역에서 12.7%의 대역폭을 얻었다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.262-263
• /
• 2007

In this paper, fully embedded and miniaturized diplexer has been designed, fabricated, and characterized for dual-band/mode CDMA handset applications. The size of the embedded diplexer is significantly reduced by embedding high Q circular spiral inductors and high DK MIM capacitors into low cost organic package substrate. The fabricated diplexer has insertion losses and isolations of -0.5 and -23dB at 824-894MHz and -0.7 and -22dB at 1850-1990MHz, respectively. Its size is 3.9mm$\times$3.9mm$\times$ 0.77mm (height). The fabricated diplexer is the smallest one which is fully embedded into low cost organic package substrate.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.172-174
• /
• 2003

Using MODIS data and several different compositing algorithms utilizing the average cloud free days in a compositing period, maximum ndvi, or dual maximum NDVI/minimum blue, multi resolution composites (250m, 500m, 1km) have been produced for Southeast Asia, with spectral bands ranging from the visible to short-wave infrared with a single band in the thermal (for land and sea surface temperature). A total of nine composites have been produced for the months of May and August in 2003, including blue, green, red, NIR, three in the SWIR, and several to specifically monitor vegetation health.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.28-28
• /
• 2015

본 연구는 KICT X밴드 이중편파 레이더 관측자료를 이용하여, 우리나라 기상조건에서 X밴드 이중편파 레이더 $K_{DP}$ 추정 기법에 따른 강우강도 추정의 차이를 비교 검토하였다. 이중편파 레이더로 $K_{DP}$ 기반의 정확도 높은 강우강도 분포 추정에 있어, $K_{DP}$ 추정의 방법에 따라서 추정된 $K_{DP}$의 공간 분포는 상당한 차이를 보이게 된다. 추정 기법만을 볼 때, 이는 주로 ${\Phi}_{DP}$로부터 기울기를 산정하는 방법과 기울기를 산정하는 윈도우의 크기에서 차이가 발생한다. 윈도우의 크기는 일반적으로 호우의 강도에 따라 달리 적용하는 것이 $R-K_{DP}$ 관계에서 보다 정확도가 높은 것으로 알려져 있다. $K_{DP}$ 산정 기법에 따른 차이 검토를 위해 기울기 산정 기법, 필터(FIR) 상수 및 ${\Phi}_{DP}$ 기울기 산정을 위한 윈도우 크기에 따른 강수 추정의 정확도를 검토하였다.

• Transactions of Materials Processing
• /
• v.30 no.5
• /
• pp.247-254
• /
• 2021

This study reviews dynamic deformation behavior of ultra-fine-grained Al alloys, ultra-fine-grained conventional low carbon steel and dual phase steel and Zr-based amorphous alloys. Dynamic tests were conducted using a Kolsky bar then the test data was analyzed in relation to resultant microstructures, mechanical properties and propensity of adiabatic shear band. In addition, deformed microstructures and fracture surfaces were used to investigate the behavior of both the dynamic deformation and fracture, and adiabatic shear banding. As a result, increasing microstructural homogeneity, strain hardenability and forming multiple shear bands could be a better way to increase the fracture resistance under dynamic loading as the formation of adiabatic shear bands was reduced or prevented.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.251-258
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) stack antenna for private network. The proposed antenna has general stack structure and design airgap between two substrate to obtain the maximum gain. Also, to improve cross polarization isolation, two feeding port is designed to separate for each substrate. The size of each patch antenna is 17.80 mm(W1)×16.70 mm(L1) for lower patch and 18.56 mm(W2)×18.73 mm(L2) for upper patch, which is designed on the FR-4 substrate which thickness (h) is 1.6 mm, and the dielectric constant is 4.3, and which is 40.0 mm(W)×40.0 mm(L) for total size of substrate. From the fabrication and measurement results, bandwidths of 100 MHz (4.74 to 4.84 GHz) for feeding port 1, and 150 MHz (4.67 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -20 dB. Also, cross polarization isolation between each feeding port obtained