• 대한전자공학회논문지TC
• /
• 제48권7호
• /
• pp.28-34
• /
• 2011

영차 공진과 반파장 공진을 이용한 이중 모드 Inductor loaded 패치 안테나의 방사 특성을 연구하였다. 반파장 공진 모드에서 수평방향으로의 방사 이득을 최소화시키는 동시에 전방 방사 이득을 향상시켜 영차 공진 모드 방사 패턴과의 격리도를 향상시켰다. 이중 모드 inductor loaded 패치 안테나 기판의 유전상수가 작을수록, 안테나의 동작 주파수 대역이 높을수록 두 모드 간의 공진 주파수 간격이 증가함을 확인하였다.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1719-1724
• /
• 2013

In this paper, a size-reduction technique is presented for the RFID reader antenna working at two UHF bands. To tackle the problem of size increase in multi-band applications, two resonance paths are made to occur in one geometry with a single feed. While one resonance path is combined with the other, the entire geometry is determined to guarantee the resonance at the target frequencies through the dual-band input impedance matching. The antenna performance is predicted by the full-wave simulation, and the design method is verified by observing the good agreement between the simulated and measured results. At the two frequencies, the satisfactory return loss as well as the antenna efficiency and peak gain of the far-field pattern is obtained.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.1-8
• /
• 2015

When the line and switchgear of the substation system are disconnected, ferro-resonance can occur. This happens even if the capacitive reactance and inductive reactance are not equal, which are not common resonance conditions. Resonance conditions vary depending on the busbar configuration environment. Although the damping resistance method applying the existing saturable reactor to cope with ferro-resonance has been successfully applied on site, there can be loss of normal function during long-term operation. The reason is because the rise in the operating frequency of saturable reactors means the saturation number is increased. Therefore, it can no longer function as saturable reactor since the resistor having inadequate capacity is burned out. To address this problem, in this paper, an EMTP-based simulation test was performed by designing and applying a dual reactor method, which adds an extended divergence reactor to the 1st side of the VT. The test result confirms that when the divergence reactor is inserted, the voltage and current values obtained at the 1st side and 2nd side of the VT as well as current values of divergence reactor part were stabilized from the transient phenomena and return to normal values. When compared with existing measures, although this method is similar in adding having a reactor added to a system regarding ferro-resonance, it has the advantage of being able to prevent ferro-resonance in advance since the reactor is added before the system is saturated. In addition, because it does not use damping resistance, it can extend the equipment life and stabilize its operation. Therefore, there are a lot of differences in terms of its operating characteristics and achivement of goal between the conventional method and new divergence reactor method.

• 한국전자통신학회논문지
• /
• 제3권2호
• /
• pp.53-57
• /
• 2008

도파로 급전 방법의 인쇄형 모노폴 구조를 응용하여 UWB대역인 이중 주파수 대역 프린트형 이중 모노폴 안테나를 설계 및 제작하였다. 이중대역을 얻기 위하여 기존의 단일 모노폴 구조를 수정한 이중 모노폴 구조를 제안하였다. 제안된 안테나는 기존의 모노폴 안테나와 동일한 무지향 복사 특성을 가지며 평면으로 구현되어 모노폴 안테나 보다 크기가 작고 높은 이득을 갖는다. 두개의 단일 모노폴은 상호 임피던스 매칭을 위한 스터브로 작용하여 임피던스 매칭이 용이하고 이에 따른 대역폭의 증가를 향상 시킬 수 있었다. 안테나의 대역폭은 VSWR$$\geq_-$$2를 기준하여 350MHz (1.69~2.04[GHz]z])와 2,670MHz (4.33~6[GHz]), 3980MHz (6.1~10.08[GHz])의 결과를 얻었다. 이는 PCS대역(1.75~1.87[GHz]) 과 UWB대역을 충족시킬 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1596-1600
• /
• 2000

We propose a novel adaptive feed forward controller (AFC) design method for rejecting the effect of micro actuator resonance in the design of dual-stage actuator servo systems for disk drives. Microactuator's resonance is one of important issues in dual-stage actuator servo, which varies up to ${\pm}10%$ per product and even during operation. We derive an adaptive algorithm for the proposed AFC design, which turns out to be identical to the delayed-x LMS algorithm which is a special form of the filtered-x LMS algorithm. In the algorithm, coefficients of the AFC are adapted by the residuals of constrained structure defined in such a way that the coefficients become time invariant. Contrary to the conventional AFC, it considers the phase delay of closed-loop transfer function at resonance frequency for system stability. We also apply an adaptive algorithm with frequency tracking capability. The frequency tracking algorithm is induced by the orthogonality of AFC coefficients. Computer simulations are carried out to demonstrate effect of the proposed AFCs.

• Investigative Magnetic Resonance Imaging
• /
• 제1권1호
• /
• pp.75-78
• /
• 1997

인체의 하지 MR Angiography(MRA)를 위한 하지전용 dual birdcage RF 코일을 설계, 제작하였으며 Volunteer실험을 하여 그 유용성을 보였다. 제안된 코일은 인체의 하지 전체의 영상을 위한 코일로 허벅지로부터 종아리까지 전체를 두 번의 영상을 통해 cover하게 된다. 기존의 방식대로 한 개의 코일을 옮기며 두 번 촬영할 경우 코일을 도중에 옮기게 외어 다리를 움직일 수밖에 없어 두 set의 영상이 완전히 연결이 되지 않지만 제안된 코일의 경우 침대만 움직이게 되므로 이런 문제가 없게 된다. 제안된 코일의 성능은 Volunteer의 하지 MRI 및 MRA를 얻어 확인했으며 임상적으로 매우 유용한 것으로 확인되었다.

• 통합자연과학논문집
• /
• 제3권2호
• /
• pp.78-83
• /
• 2010

DBR/Host dual porous silicons containing DBR and host structure were prepared and their optical properties were characterized using Ocean Optics spectrometer. In this dual porous silicon, single porous silicon layer was used as host layer for possible biomolecule and drug materials and DBR porous silicon layer was used for signal transduction due to the recognition of molecules. Optical reflection spectrum of dual porous silicon displayed only DBR reflection but Fabry-Perot fringe pattern. DBR reflection band of dual porous silicon shifted to the shorter wavelength as the etching time of host layer increased. Cross-sectional FE-SEM image of dual porous silicon displayed a thickness of about 20 micrometer for DBR porous silicon layer. Developed etching technology could be useful to prepare DBR porous silicon which exhibited specific reflection resonance at the required wavelength and to provide an label-free biosensors and drug delivery materials.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.25-34
• /
• 2017

The concentric dual-buoy Wave Energy Converter (WEC), which consists of external buoy (hallow-cylinder) with toroidal appendage and cylindrical internal buoy within the moon-pool is suggested in this research and its performance in various wave conditions is studied. The Linear Electric Generator (LEG), consisting of a permanent magnet and coils, is used as a direct Power Take-Off (PTO) system. To maximize the electrical energy extracted from the PTO system, the relative heave motions between the dual buoys must be highly amplified by the multiple resonance phenomena of dual-buoy and internal-fluid motions. The high-performance range can be widened by distributing those natural frequencies with respect to the peak frequency of the wave spectrum. The performance of the newly developed dual-buoy WEC was measured throughout the systematic 1:5.95-model test in regular and irregular waves conducted in a wave tank at Seoul National University. The model-test results are also validated by an independently developed numerical method.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1908-1916
• /
• 2018

This paper proposes a controller design method for suppressing the resonance generated in the slave motor in the middle and low speed operation range, according to the load and parameter differences between two motors, during parallel operation using the master and slave method that controls two surface permanent magnet synchronous motors connected in parallel by a single inverter. The proposed resonance suppression controller is directly obtained by analyzing the resonance characteristics, using the lead controller method. Therefore, it is possible to fundamentally reduce trial and error to set the controller gain. In addition, because the proposed resonance suppression controller was designed as a lead controller, the stability region of the system increased owing to the added zero point, making the system robust with respect to parametric variations. Simulations and experiments confirmed the usefulness of the proposed method and the system's robustness with respect to parametric variations.

• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.933-939
• /
• 2010

본 논문에서는 GPS(1.57~1.577 GHz)와 WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz)에서 이중 대역 동작하는 변형 스파이럴 모노폴 인쇄형 안테나를 설계 제작하였다. 이중 대역 동작하는 안테나 설계 시 필요한 주파수비를 자유롭게 조절하기 위해, 기본 공진 주파수와 3배수 하모닉 공진 주파수의 전류 분포가 다름을 이용하여 스파이럴 내부 선로의 간격을 다르게 하고 브랜치 라인을 삽입하였다. 측정 대역폭은 기본 공진 주파수에서 140 MHz(1.47~1.61 GHz), 3배수 하모닉 공진 주파수에서 420 MHz(2.29~2.71 GHz)로 나타났다. 최대 방사 이득은 GPS(1.575 GHz) 대역에서 2.825 dBi, WiBro(2.35 GHz) 대역에서 3.65 dBi, 그리고 WLAN(2.45 GHz) 대역에서 4.564 dBi로 측정되었다.