• Elastomers and Composites
• /
• 제33권1호
• /
• pp.44-51
• /
• 1998

The purpose of this experiments were investigated on the physical properties of rubber com-pounds containing two types carbon black. Bound rubber and interaction coefficient for com-pounds with pure carbon black were higher than those for the compounds with dual phase carbon black. Slightly higher values in 300% modulus and tensile strength indicated that the ratio of rubber-filler bound to rubber-rubber bound of pure carbon black were higher than those of com-pounds with dual phase carbon black. It was founded that dynamic properties, that is rebound, heat build-up, 0 & $60^{\circ}C$ tan $\delta$, and cut and chip loss of compounds with dual phase carbon black were better than those of compounds with pure carbon black, but abrasion property of dual phase carbon black was lower than those of pure carbon black because of low reinforcing ability.

• Transactions on Electrical and Electronic Materials
• /
• 제15권1호
• /
• pp.20-23
• /
• 2014

Dual phase steels have a microstructure comprising of a polygonal ferrite matrix together with dispersed islands of martensite. There are clear differences between the image quality (IQ) map of the dual phase and the corresponding ferritic/pearlitic structures, both in the as-heat treated and cold rolled conditions. Electron backscatter diffraction (EBSD) techniques were used to study the evolution substructure of steel due to plastic deformation. The martensite-ferrite and ferrite-pearlite interfaces were observed. The interface can be a source of mobile dislocations which the bands seem to originate from the martensite islands. In particular, the use of image quality is highlighted.

• 고무기술
• /
• 제5권2호
• /
• pp.94-103
• /
• 2004

The present work describes modification of dual phase filler by electron beam irradiation in presence of multifunctional acrylates like trimethylol propane triacrylate (TMPTA) or silane coupling agent like bis (3-triethoxysilylpropyltetrasulphide) and in-fluence of the modified fillers on the physical properties of styrene-butadiene rubber (SBR) vulcanizates. Modulus at 300 % elongation increases whereas the tensile strength decreases with increase in radiation dose for the dual phase filler loaded styrene-butadiene rubber vulcanizates (SBR). However, modulus and tensile strength significantly increase, which is more, pronounced at higher filler loadings for TMPTA modified dual phase filler loaded SBR. These changes in properties are explained by the equilibrium swelling data and Kraus plot interpreting the polymer-filler interaction. Electron beam modification of the filler results in a reduction of tan ${\delta}$ at $70^{\circ}C$, a parameter for rolling resistance and increase in tan ${\delta}$ at $0^{\circ}C$, a parameter for wet skid resistance of the SBR vulcanizates. Finally, the influence of modified fillers on the properties like abrasion resistance, tear strength and fatigue failure and the improvement in the properties have been explained in terms of polymer-filler interaction.

• Steel and Composite Structures
• /
• 제38권4호
• /
• pp.355-363
• /
• 2021

The present paper attempts to investigate the propagation of plane waves in an isotropic elastic medium under the effect of initial stress and temperature-dependent properties. The modulus of elasticity is taken as a linear function of the reference temperature. The formulation is applied under the thermoelasticity theory with dual-phase-lag; the normal mode analysis is used to obtain the expressions for the displacement components, the temperature, the stress, and the strain components. Numerical results for the field quantities are given in the physical domain and illustrated graphically. Comparisons are made with the results predicted by different theories (Lord-Shulman theory, the classical coupled theory of thermoelasticity and the dual-phase-lag model) in the absence and presence of the initial stress as well as the case where the modulus of elasticity is independent of temperature.

• ETRI Journal
• /
• 제35권1호
• /
• pp.150-153
• /
• 2013

In this letter, a compact and fully printed composite right- and left-handed (CRLH) dual-band power divider is proposed. The branches of the conventional Wilkinson power divider are replaced by subwavelength CRLH phase-shift lines having $+90^{\circ}$ for one frequency and $-90^{\circ}$ for another frequency for dual-band and miniaturization performance. Equations are derived for the even- and odd-mode analysis combined with the dual-band CRLH circuit. A PCS and a WLAN band are chosen as the test case and the circuit approach agrees with the CAD simulation and the measurement. Additionally, the CRLH property is shown with the dispersion diagram and the eightfold size reduction is noted.

• 호남수학학술지
• /
• 제38권3호
• /
• pp.435-454
• /
• 2016

This paper investigates the effect of dual-phase-lags on a thermoviscoelastic orthotropic solid with a cylindrical cavity. The cylindrical cavity is subjected to a thermal shock varying heat and its material is taken to be of Kelvin-Voigt type. The phase-lag thermoelastic model, Lord and Shulman's model and the coupled thermoelasticity model are employed to study the thermomechanical coupling, thermal and mechanical relaxation (viscous) effects. Numerical solutions for temperature, displacement and thermal stresses are obtained by using the method of Laplace transforms. Numerical results are plotted to illustrate the effect phase-lags, viscoelasticity, and the variability thermal conductivity parameter on the studied fields. The variations of all field quantities in the context of dual-phase-lags and coupled thermoelasticity models follow similar trends while the Lord and Shulman's model may be different. The influence of viscosity parameter and variability of thermal conductivity is very pronounced on temperature and thermal stresses of the thermoviscoelastic solids.

• 대한전자공학회논문지TC
• /
• 제41권2호
• /
• pp.53-58
• /
• 2004

본 논문에서는 부성저항을 갖는 발진부의 귀환 경로에 PIN 다이오드를 이용한 스위칭 회로를 추가하여 저 위상잡음 듀얼밴드 전압제어 발진기를 구현하였다. PIN 다이오드에 전원이 인가되지 않았을 때는 5㎓ 대역에서 발진이 일어나고, 인가되었을 때는 1.8㎓ 대역에서 발진이 일어난다. VCO의 위상잡음을 향상시키기 위하여 공진기에 PBG(Photonic Bandgap)구조를 접지 면에 적용하였다. 5.25㎓에서 출력 전력은 -9.17㏈m, 위상잡음은 -102㏈c/㎐이고, 1.8㎓에서 출력 전력은 -5.17㏈m, 위상잡음은 -101㏈c/㎐이다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.683-686
• /
• 2014

Objective: The purpose of the study was to evaluate clinical value of dual-phase $^{18}F$-FDG SPECT with serum procalcitonin (PCT) in identifying cancers in patients with fever of unknown origin (FUO). Methods: PCT test and dual-phase $^{18}F$-FDG SPECT were sequentially performed on 50 consecutive patients with FUO. Two radiologists evaluated all $^{18}F$-FDG SPECT data independently. A consensus was reached if any difference of opinions existed. Final diagnosis was based on a comprehensive analysis of results for the PCT test, dual-phase $^{18}F$-FDG SPECT and bacterial cultivation, regarded as a gold standard. Results: Among 50 patients, 34 demonstrated PCT ${\geq}0.5{\mu}g/L$. Coincidence imaging showed in 37 patients with inflammatory lesions, and 13 with malignancy. Finally, 36 bacterial, 1 fungal and 1 viral infections, as well as 12 cancerous fevers were confirmed by dual-phase $^{18}F$-FDG SPECT with PCT, combined with bacterial cultivation and clinical follow-up. Conclusion: Our study demonstrated that dual-phase $^{18}F$-FDG SPECT in association with PCT could be a valuable tool for diagnosis in tumor patients with FUO.

• Elastomers and Composites
• /
• 제37권2호
• /
• pp.86-98
• /
• 2002

본 연구에서는 실리카/카본블랙 혼합사용과 카본블랙 단독 사용의 경우 상온 또는 고온에서의 인장강도(modulus) 및 인열저항성, 내cutting성, 내crack성을 비교 평가하였다. 실리카와 카본블랙의 함량비 및 단계배합 방법을 통해 NR 가황물을 제조하였으며, 충전제의 함량은 60phr로 고정하였고, semi-EV 가황시스템을 적용하여 실험을 실시하였다. 실리카의 분산은 25phr이하일 때 양호하였으며, 실리카/카본블랙의 함량비가 25/35인 경우 인열에너지, 내crack특성, 내cutting특성이 가장 우수하였다. 충전제로써 카본블랙 단독사용과 실리카/카본블랙(25/35) 혼합사용의 경우를 비교해 보면, 열화에 따른 modulus 및 인장강도, 인열에너지는 실리카/카본블랙(25/35)을 사용한 시편이 더 낮은 감소율을 나타내었다. Cutting특성에서는 카본블랙 단독 사용보다는 실리카/카본블랙(25/35) 혼합사용의 경우가 더 높은 cutting 저항성을 나타내었다. 내crack 특성 또한 실리카/카본블랙(25/35)을 혼합사용한 경우가 온도에 따른 더 높은 변형에너지 완화율(Gp)에도 불구하고 더 낮은 크랙성장속도를 나타내었다.

• 전기전자학회논문지
• /
• 제12권4호
• /
• pp.246-254
• /
• 2008

본 논문에서는 멀티 스레드와 듀얼 페이즈 명령어 파이프라인을 가진 4way SIMD 프로세서를 설계하였다. 8개의 스레드가 round-robin 방식으로 실행되어, 해저드를 발생시키지 않는다. 또한 듀얼 페이즈 기능은 1개의 코어가 2개의 프로세서처럼 동작하도록 명령어를 최대 4개를 입력 받아 처리한다. 이 가변 명령어 구조는 1차와 2차 페이즈로 나뉘어 명령어를 수식할 수 있으며, 이 기능을 통해 분기명령이나 어드레싱 명령을 단일 클럭에 수행할 수 있도록 한다. 이 프로세서는 명령어 수행 시간을 일반적인 SIMD 구조에 비하여 50% 이하로 단축시킬 수 있으며, 최대 2배의 성능향상을 보이고 25%까지 코드 크기를 줄일 수 있다..