• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1165-1169
• /
• 2003

이중 이온빔 스퍼터링(Dual ion-beam sputtering)을 사용하여 보조이온건의 Ar/O$_2$가스유량 변화에 따라 Si-(III) 기판과 glass에 Ta$_2$O$_{5}$ 박막을 증착시켰다. 보조 이온총의 산소 가스량의 비가 감소함에 따라서 증착되는 Ta$_2$O$_{5}$ 박막의 성장속도는 감소하였으며, 굴절률은 $O_2$ 가스의 양이 0∼12sccm인 범위에서 2.09(at 1550nm)로 일정한 값을 나타내었다. Ar:O$_2$가 3: 12인 조건에서 화학양론 조성인 Ta$_2$O$_{5}$를 형성하였으며, 표면 거칠기도 가장 작은 값을 나타내었다.나타내었다.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.28-32
• /
• 2005

이중 이온빔 스퍼터링(Dual ion-Beam Sputtering, DIBS)과 단일 이온빔 스피터링(Single ion-Beam Sputtering, SIBS)을 사용하여 기판의 온도와 보조 이온빔 에너지 변화에 따라 $Ta_{2}O_{5}$ 박막의 광학적 특성과 박막에 존재하는 응력의 변화에 과해 관찰하였다. SIBS 방법에 의해 증착되어진 박막의 굴절률은 150^{circ}C$에서 최고 2.144를 나타내었으며, $150^{circ}C$ 이상에서는 감소하였다. DIBS 방법에 의해 증착된 732린 박막은 기판의 온도가 증가함에 따라 $200^{circ}C$에서 최고 2.117의 굴절률을 나타내었다. $100^{circ}C$ 미만의 저온 DIBS 증착은 박막에 존재하는 응력을 낮추었으나 100^{circ}C 이상의 고온 증착시에는 박막에 존재하는 응력이 켰다. 보조 이온빔 어시스트 한 경우, 보조 이온빔 에너지가 250V에서 350V로 증가함에 따라 증착된 T놀달 박막의 굴절률은 2.185로 증가하였으나, $350\~650V$인 구간에서는 굴절률이 감소하는 경향을 나타냈다. 또한, 보조 이온빔 에너지가 증가함으로써 박막에 존재하는 응력이 감소하여 650 V에서 0.1834 GPa를 나타내었다.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.576-582
• /
• 2021

Dichroic beam-splitter (DBS) with polarization-maintaining took an important role in the free space quantum telecommunication tests on the Micius satellite of China. In this presentation, we designed and prepared a 50 layer polarization-maintaining DBS coating by a dual ion beam sputtering deposition (Dual-IBS) method. In order to solve a stress problem, an 18 layer special anti-reflection (AR) coating with similar physical thickness ratio was deposited on the backside. By stress compensation, the surface flatness RMS value of the DBS sample decreased from 0.341 λ (@632.8 nm) to 0.103 λ while beam splitting and polarization maintaining properties were almost kept unchanged. Further, we discussed the mechanism of film stress and stress compensation by equation deduction and found that total stress had a strong relationship with the total physical thickness and the ratio of layer materials.

• 한국진공학회지
• /
• 제6권S1호
• /
• pp.16-22
• /
• 1997

ion beam processing of materials for medical application has gained increasing interest in the last decade and the implantation of nitrogen into TI-6AI-4V to improve corrosive-wear performance is currently used for processing of total hip and knee joints. Oxides and nitrides of Ti, Zr, Al, Cr were deposited on TI-6AI-4V substrates by DC magnetron sputtering dual ion beam sputtering and ion beam assisted deposition. The cytotoxicity of these films were investigated by MTT method and showed comparable to untreated TI-6AI-4V Plasm-sprayed hydroxyapatite(HAp) coatings showed excellent cytotoxicity regardless of heat treatment. intermediate layer coatings of nitrides and oxides increased the bond strength of HAp to substrate by intrdducing chemical bond at interface. Heat treatment of HAp coatings also improved the chemical bond at interfaces and increased the bond strength of untreated TI-6AI-4V to 16.4 kg/$\textrm{cm}^2$ but still lower than 33.1 kg./$\textrm{cm}^2$ of ir oxide as a imtermediate layer caoting.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.147.1-147
• /
• 2003

• 열처리공학회지
• /
• 제21권5호
• /
• pp.235-243
• /
• 2008

Ni-C composite films were prepared using a combination of microwave plasma CVD and ion beam sputtering deposition working in a codeposition way. The structure of these films was characterized by energy-dispersive X-ray diffraction (EDXRD), transmission electron microscopy (TEM) and Raman spectroscopy. It was found that a nickel carbide phase, $Ni_3C$ (hcp), formed as very fine crystallites over a wide temperature range when Ni-C films were deposited at low $CH_4$ flow rates. The thermal stability of this nonequilibrium carbide $Ni_3C$ was also studied. As a result, the $Ni_3C$ carbide was found to decompose into nickel and graphite at around $400^{\circ}C$. With high $CH_4$ flow rates (> 0.2 sccm), the structure of the Ni-C films became amorphous. The formation behavior of the carbide and amorphous Ni-C phases are discussed in relation to the electrical resistivity of the films.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.6-6
• /
• 1992

Ionized cluster beam deposition (ICBD) technique has been employed to fabricate high-purity crystalline polyimide (PI) film. The pyromellitic dianhydride (PMDA) and oxydianiline (ODA) were deposited using dual ICB sources, Fourier trans forminfraredspectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), and Transmission electron microscopy (TEM)study show that the bulk and surface chemical properties and the crystalline structure are very sensitive to the ICBD conditions such as cluster ion acceleration voltage and ionization voltage, At optimum ICBD conditions, the PI films have a maximum imidization, negligible impurities(∼1% isoimide), and a good crystalline structure probably due to the high surface migration energy and surface cleaning effect. These characteristics are superior to those of films deposited by other techniques such as colvent cast, vapowr deposition, or sputtering techniques.

• 한국광학회지
• /
• 제14권3호
• /
• pp.331-337
• /
• 2003

본 연구는 이중 이온빔 스퍼터링 증착법으로 제작한 채널 간격 50 ㎓ 광통신용 협대역 투과 필터에 관한 연구이다. Ta$_2$ $O_{5}$ 단층박막의 특성 분석을 통해 공정 조건을 최적화 하였으며, DPS 필터 예비 증착을 통해 0.1 nm 이하의 박막두께 균일성을 확보하였다. 1/4 파장 광학박막 두께를 기본으로 하여 총 216층으로 구성되고 4개의 간격층을 갖는 채널 간격 50 ㎓ 협대역 투과 필터를 설계하였고, 파장 가변 레이저를 사용한 비접촉 광학 두께 제어 시스템을 사용하여 증착하였다. 박막 증착시 발생하는 스트레스를 줄이기 위하여 열팽창 계수가 큰 유리 기판을 사용하였으며, 비접촉 광학 두께 제어 시스템의 오차를 줄이기 위하여 협대역 투과 필터의 제작에 앞서 기판의 뒷면에 무반사 증착을 수행하였다. 이렇게 제작된 채널 간격이 50 ㎓인 협대역 투과 필터의 광학 특성은 삽입 손실이 0.40 ㏈, 잔물결이 0.20 ㏈이며,-0.5 ㏈와 -25 ㏈에서의 투과 대역폭이 각각 0.20 nm, 0.60 nm로 광통신에서 사용되는 사양을 만족하였다.하였다.

• 한국재료학회지
• /
• 제26권6호
• /
• pp.293-297
• /
• 2016

Ni-C composite films were prepared by co-deposition using a combined technique of plasma CVD and ion beam sputtering deposition. Depending on the deposition conditions, Ni-C thin films manifested three kinds of microstructure: (1) nanocrystallites of non-equilibrium carbide of nickel, (2) amorphous Ni-C film, and (3) granular Ni-C film. The electrical resistivity was also found to vary from about $10^2{\mu}{\Omega}cm$ for the carbide films to about $10^4{\mu}{\Omega}cm$ for the amorphous Ni-C films. The Ni-C films deposited at ambient temperatures showed very low TCR values compared with that of metallic nickel film, and all the films showed ohmic characterization, even those in the amorphous state with very high resistivity. The TCR value decreased slightly with increasing of the flow rate of $CH_4$. For the films deposited at $200^{\circ}C$, TCR decreased with increasing $CH_4$ flow rate; especially, it changed sign from positive to negative at a $CH_4$ flow rate of 0.35 sccm. By increasing the $CH_4$ flow rate, the amorphous component in the film increased; thus, the portion of $Ni_3C$ grains separated from each other became larger, and the contribution to electrical conductivity due to thermally activated tunneling became dominant. This also accounts for the sign change of TCR when the filme was deposited at higher flow rate of $CH_4$. The microstructures of the Ni-C films deposited in these ways range from amorphous Ni-C alloy to granular structures with $Ni_3C$ nanocrystallites. These films are characterized by high resistivity and low TCR values; the electrical properties can be adjusted over a wide range by controlling the microstructures and compositions of the films.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.466-471
• /
• 2004

In focused-ion-beam (FIB) application of micromachining and device transplantation, four kinds of FIB processes, namely FIB sputtering, FIB-induced etching, redeposition, and FIB-induced deposition, are well utilized. As with FIB systems, scanning electron microscopes(SEMs) were extensively used in the semiconductor industry. They are the tools of choice for defect review and providing the image resolution needed for process monitoring. The enhanced capabilities of a dual-column on one chamber system are quickly becoming realized by the nano industry for performing a wide range of application.