• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.67-68
• /
• 2006

A suspended microstrip line structure over mushroom-like SMPs is designed and is applied to a dual-frequency and dual-polarization microstrip patch antenna. This structure has a distinctive and sharp rejection band and provides near 0 dB insertion loss outside the rejection band. Applying the structure to the conventional DFDP antenna enhanced the isolation between the two ports more than 20 dB. The structure is expected to have a wide range of applications in antennas and filters due to its compactness and integrability in circuits.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.787-798
• /
• 1995

We implement the E-plane T-juncition manifold mutiplexer having low insertion loss for output multiplexer of Ku-band satellite transponder. Manifold multiplexer implemented here is composed of 2 channel filters, T-junctions, half-wave waveguide connecting channel filters and manifold, and manifold itself.[1-4] Considering the mass and volume of the satellite transponder, the channel filters are designed to dual-mode.[5-13] And Elliptic filter function is used, which has good characteristics of suppressing the interference between 2 channels. Since the performance of manifold multiplexer depends on the manifold waveguide transmission line length, it's necessary proper analysis. In this paper, we do optimization process of T-junction and other elements by using CAD and implement the manifold multiplexer. An experiment shows that characteristic response of multiplexer matches wel its modeling result.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.202-204
• /
• 2006

A new method is presented to design RF filters without the Similarity Transform of their coupling coefficient matrix as circuit parameters which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order Coaxial Lowpass filter and an 8th order dual-mode elliptic integral function response filter are taken as an example to validate the proposed method.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.25-28
• /
• 2010

The need for multiband RF front-end in modern communication system is growing rapidly. For example, satellite system always uses a complex arrangement of frequency plans and consequently needs filters for each communication channel and it will be ideal to have a single filter module that does jobs of all those channel filters to reduce the size and payload of the system. In this paper, a new method to transform four-port self-feedback balanced dual-band bandpass filter into two-port is proposed. The two-port balanced dual-band bandpass filter which has baluns at the input and output ports and the fundamental frequency at 2.5 GHz and the first harmonic frequency at 5.7 GHz is fabricated and measured. Good agreement between measured and simulated results was achieved.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.124-128
• /
• 1997

Semivolatile components in mainstream smoke of cigarette attached the different type filter were analysed. Based on the main peak of GC profile, benzene, toluene, acetic acid, limonene, acetamide, pyridine, nicotine, phenol, pyrrole, and furfuryl alcohol were identified. The amount delivered of semivolatile components by each filter was evaluated with the ratio of areas of sample vs area% of ISTD. By comparing dual and triple filter to mono filter, the delivery amounts were 52% benzene, 62% toluene and 74% benzene, 84% toluene, respectively. The delivery amount of limonene which was known of tobacco taste component, were 52%, and 93% by dual and triple filter, respectively. Also, delivery amounts of acetic acid which was one of acidic compounds in smoke, were 86% and 83% by dual and triple filter, respectively. When adding the same amount of active carbon, the amounts delivered of vapour phase such as benzene and toluene by dual filter were lower than that of triple filter. But the delivery amounts of acetic acid and phenol by dual filter were higher than that of triple filter. This results assume that the pH of active carbon in filter affect to the adsorption or absorption of triacetin during filter making process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.706-712
• /
• 2004

This paper presents the design technique of output multiplexer(OMUX) for the Ka-band satellite transponder. Output multiplexer consists of low-pass filter(LPF), channel filter and manifold. Channel filters adopt dual-mode technique in design for mass and volume reduction and frequency response of channel filters is 4-pole elliptic response for high frequency selectivity. w-pass filters are designed to be of 13th order corrugated type for high rejection characteristic over reception band of satellite transponder. After initial design of channel filters and manifold, we optimized only a few design parameters for fast and easy optimization instead of optimizing all the design parameter. Measured results of a realized output umltiplexer for Ka-band satellite transponder show good agreement with the computed ones.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.20-30
• /
• 1999

We have made the single side hand filter for the dual channel receiver which is a heterodyne receiver to observe the cosmic radio waves with 100GHz band ranged from 85GHz to 115GHz and 150GHz band ranged from 125GHz to 175GHz simultaneously. We have introduced the filter theory using the principle of the Martion-Puplett interferometer, which has the characteristics of rotated polarization. To reduce the loss of the transmission and beam coupling which are caused from the path difference associated with the intermediate frequency the design and the implementation have been intensely considered. The receiver needs two filters with different characteristics each other. Because each of them has the optimum positions as a function frequency at which the signal frequency is fed to mixer and the image frequency is rejected to the image termination load. The intermediate frequency and its band width have been also evaluated. We have measured the property of two filters using the vector network analyser and the beam measurement system which is made by us. The responses of the filter as a function of the position and the frequency are compared with the theory. It is shown that not only the measured values are very close to the theoretical values, but also the image rejection ratios are better than 22dB for both filters. Through successful observation using a dual channel receiver with two manufactured filters, the performance of the filters has finally verified.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.288-294
• /
• 2004

In this paper, a ceramic antenna and diplexer are designed for dual-band handset ap plications. Basically, the antenna is designed by using the meander line configuration. The diplexer presented in this paper is composed of both low- and high-pass filters. We have designed the low- and high-pass filters with attenuation poles to improve the attenuation performances of the diplexer. The attenuation poles are located at each rejection frequency region so as to improve the shrinkage characteristic of the diplexer. In order to accomplish the volume effectiveness, the antenna and the diplexer have been designed and fabricated in a multi-layer structure. The diplexer designed with a multi-layer structure has inductors and capacitors, which are implemented by LTCC (Low Temperature Co-fired Ceramics) process technique. Design of the multi-layer antenna and diplexer has been achieved by employing the full 3-D EM simulation. The designed antenna and diplexer offer excellent return loss and broadband performances with highly isolated rejection performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.674-679
• /
• 2007

In this paper, the size of the dual-mode microstrip ring resonator is reduced by adding four open stubs, and bandpass filters having 100 MHz bandwidth are designed at the center frequency of 2 GHz. The size of the ring resonator can be controlled by varying the capacitance of the stubs, and the bandpass filter can be designed in two cases, which are two combinations of the stubs. Two bandpass filters are designed and fabricated by using the two-stage bandpass filter circuit model of the proposed structure, and the measured results show good agreement with the simulated results.