• Advances in Energy Research
• /
• 제8권3호
• /
• pp.175-184
• /
• 2022

The dual-fuel technology, which uses gaseous fuel as the main fuel and liquid as the pilot fuel, is an appealing technology for reducing the exhaust emissions. The current study proposes emission models based on ANFIS for a dual-fuel using producer gas (PG)-diesel engine. Emissions measurements were taken at different engine load levels and fuel injection timings. The proposed model predictions were examined using statistical methods. With R2 values in the range of 0.9903 to 0.9951, the established ANFIS model was found to be consistently robust in predicting emission characteristics. The mean absolute percentage deviate in range 1.9 to 4.6%, and mean squared error varies in range 0.0018 to 13.9%. The evaluation of the ANFIS model developed shows a reliable claim of intrinsic sensitivity, strength, and outstanding generalization. The presented meta-model can be used to simulate the engine's operation in order to create an efficient control tool.

• 한국방사선학회논문지
• /
• 제10권6호
• /
• pp.451-456
• /
• 2016

방사선 검사로 환자의 병을 진단하기 위해서는 방사선 피폭이 따르게 된다. 최소한의 피폭으로 병변을 진단하는 일반촬영에 이중 엑스선 에너지 기법의 임상적용 가능성을 SNR 및 화질 점수화의 지표로 조사하였다. 이중 엑스선 에너지 기법은 검출기로 사용되는 두 개의 Image Plate 사이에 0.5 mm 두께의 Cu와 Al 필터를 추가함으로써 구현하였다. 한 번의 엑스선 조사로 획득된 두 IP 영상을 Subtraction 및 Enhance Contrast 기법을 적용하여 획득하였다. Enhance 영상은 첫 번째 IP에서 획득한 First 영상보다 SNR이 우수한 것으로 측정되었다. 이 일반촬영의 이중 엑스선 에너지 기법은 피폭선량을 줄이면서 영상의 품질을 높일 수 있는 방법으로 임상에서 매우 유용하게 적용될 수 있을 것이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.405-411
• /
• 2018

We will provide basic data on the evaluation of patient dose in terms of DECT quality control by comparing the equipment-provided dose with the measured dose according to the configuration method of the X-ray generator by the manufacturer of the dual-energy CT unit. For computed tomography (CT) equipment, Discovery 750HD, Aquilion ONE GENESIS Edition, and Somatom Definition Flash were used. The $CTDI_{vol}$ value was measured by inserting the Unfors Xi ion chamber into a 32 cm PMMA acryl Phantom. The results of estimated $CTDI_{vol}$ DECT and measured $CTDI_{vol}$ showed that the dose difference between DECT 80 + 140 kVp of G company was at least 0.51% and -1.90% max, and measured $CTDI_{vol}$ was slightly lower (p<0.05). The difference of 80 + 140 kVp of S company was the minimum of 5.84% and the maximum of 7.52% (p<0.05). The measured $CTDI_{vol}$ was less than estimated $CTDI_{vol}$. The C company's 80 + 135 kVp showed a difference of at least 7.58% and a maximum of 13.58% (P<0.05), and all of measured $CTDI_{vol}$ was less. The linearity of exposure dose for all DECT equipment was very linearly reflected with $R^2$ being 0.97 or above, and the measured dose of the ionization chamber was less than the predicted dose of the monitor.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권1호
• /
• pp.47-51
• /
• 2018

To evaluate the applicability of osteoporosis management by statistical analysis of the correlation between bone mineral density (BMD) changes after menopause by dividing the T-score of bone mineral density measured by dual energy X-ray absorptiometry do. Between January 1, 2016 and July 31, 2017, women who visited the medical center of W Medical Center were enrolled in this study. The postmenopausal period was divided into 5 groups, There were 18 patients within 5 years, 44 patients in 6~10 years, 134 patients in 11~15 years, 109 patients in 16~20 years and 21 patients in 21 years or older. And postmenopausal women. Bone mineral density (BMD) of the lumbar spine and femur was measured using a dual energy X-ray absorptiometry. The lowest value among lumbar spine 1, 2, 3 and 4 and the lowest value among the femoral neck, greater trochanter, total femur, and ward Values were measured. The statistical significance was analyzed by using bivariate correlation coefficient method and one - way ANOVA. In 326 patients who underwent BMD, the correlation between bone mineral density and postmenopausal BMD showed a negative correlation (-.159, p<.01) with BMD of femur and BMD of lumbar spine The correlation between the menopausal period and negative (-.208, p<.01) was shown. There was a significant difference (p<.012) between the postmenopausal femur bone density and the mean value of the lumbar spine BMD (p<.000). The relationship between bone mineral density (BMD) and postmenopausal women's postmenopausal status can be estimated by estimating the bone mineral density and using it as a basic data for osteoporosis management.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.36-47
• /
• 2006

인공위성에서 자세획득을 위해 기동을 하거나 이상상태 발생으로 위성이 임무를 수행하지 못하여 결국에 위성을 잃어버리게 되는 Flat Spin 상태에서 자세를 복구하는 방안인 Dual Spin Turn의 원리에 대한 연구가 수행되었다. Dual Spin Turn 현상에서 중요한 모멘텀 전달 원리를 물리적으로 명확하게 설명하였다. 그리고 기존의 연구결과에서 많이 알려진 방법을 포함하여 일반적인 위성의 관성모멘트 조건과 모멘텀 휠의 회전 방향 등을 여러 가지로 변화시켜 보면서 타당성을 검증하였다. Dual Spin Turn 과정은 개루프 제어와 에너지 감쇄장치의 도입이라는 2단계 제어방법을 이용하여 여러 경우에 대해 시뮬레이션으로 분석해보았다. 또한 제어의 타당성을 입증하기 위해 2단계 제어 이후의 안정성에 대해 검증하였다. 그리고 Dual Spin Turn을 이용하여 Flat Spin Recovery를 수행하는 시나리오를 예제로 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.891-897
• /
• 2010

This paper proposes a cooperative control algorithm for a dual-arms robot which is carrying an object to the desired location. When the dual-arms robot is carrying an object from the start to the goal point, the optimal path in terms of safety, energy, and time needs to be selected among the numerous possible paths. In order to quantify the carrying efficiency of dual-arms, DAMM (Dual Arm Manipulability Measure) has been defined and applied for the decision of the optimal path. The DAMM is defined as the intersection of the manipulability ellipsoids of the dual-arms, while the manipulability measure indicates a relationship between the joint velocity and the Cartesian velocity for each arm. The cost function for achieving the optimal path is defined as the summation of the distance to the goal and inverse of this DAMM, which aims to generate the efficient motion to the goal. It is confirmed that the optimal path planning keeps higher manipulability through the short distance path by using computer simulation. To show the effectiveness of this cooperative control algorithm experimentally, a 5-DOF dual-arm robot with distributed controllers for synchronization control has been developed and used for the experiments.

• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1177-1191
• /
• 2014

Reinforced concrete (RC) shear walls are one of the most commonly used lateral-load resisting systems in high-rise buildings. RC Parallel redundancy walls studied herein consist of two parts nested to each other. These two parts have different mechanical behaviors and energy dissipation mechanisms. In this paper, experimental studies of four 1/2-scale specimens representing this concept, which are subjected to in-plane cyclic loading, are presented and test results are discussed. Two specimens consist of a wall frame with barbell-shaped walls embedded in it, and the other two consist of a wall frame and braced walls nested each other. The research mainly focuses on the failure mechanism, strength, hysteresis loop, energy dissipation capacity and stiffness of these walls. Results show that the RC parallel redundancy wall is an efficient lateral load resisting component that acts as a "dual" system with good ductility and energy dissipation capacity. One main part absorbs a greater degree of the energy exerted by an earthquake and fails first, whereas the other part can still behave as an independent role in bearing loads after earthquakes.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.125-133
• /
• 2016

In this paper, we propose a vertical axis water turbine with dual blades. A parametric study was conducted using numerical analyses. First, a two-dimensional finite-volume analysis with a commercial code was used to find the pitch angle of the main blade under different tip speed ratio conditions. Second, we developed a potential-based panel method to find the best configuration of the inner blades. Experimental tests were conducted at the circulating water channel of Chungnam National University. Various configurations of the dual blades were considered, and their performances were comparatively investigated. The results showed that the turbine with movable dual blades produces a constant torque and tip speed ratio at various flow rates.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.63.2-63.2
• /
• 2011

The objective of this study is to investigate the aerodynamic characteristics of a small vertical axis wind turbine with dual blade type. The Wind turbine with dual blade has various angle of attack. so this turbine improve starting characteristics. The various arrangement of the vertical axis wind turbine with dual blade is designed. Among them, it shows superior quality that is arranged in three rows. Among arrangement in three rows, we use general computational fluid dynamics program CFX to find out the optimal arrangement. By comparing the predicted results of the aerodynamic characteristics of the different arrangement of the blades, an appropriate arrangement of the blade is suggested to design the small wind turbine blade.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.376-377
• /
• 2013

반도체산업이 발전함에 따라 패턴이 점점 더 복잡해 지고 있다. 이에 따라 웨이퍼 위에 올려지는 layer도 개수도 많아지고 점점 더 두꺼워진다. 예전에는 수백 nm였지만 최근에는 um단위까지 두꺼워지고 있다. 하지만 mask 역할을 하는 ACL과 substrate (SiO2)의 selectivity는 일정하기 때문에 mask 역할을 하는ACL layer 역시 두꺼워지는 것이 불가피하다. 이로인해 예전에는 없었던 문제들이 발생하기 시작한다. Mask 역할을 하는 ACL layer가 얇고 패턴 크기가 클 때에는 아무런 문제도 없었지만 ACL layer도 두꺼워 지고 패턴 크기도 수십 nm로 작아졌기 때문에 ACL 역시 식각 공정을 할 때 어려움이 생기기 시작한다. 이를 해결하기 위한 하나의 방법으로 자화된 ICP 챔버 substrate에 Dual bias frequency 인가하여 식각해 보고 이와같이 하였을 때 식각특성을 분석해 보았다. 자화된 ICP 챔버에서 substrate에 dual bias frequency를 인가함으로써 ion energy와 ion flux에 변화가 생기게 되고 이로 인해 다른 식각 특성이 나타나게 되었다. Dual bias frequency의 비율을 변화시켜 보고 변화에 따른 식각 특성을 분석해 보았다. 이와 같은 과정을 통하여 높은 주파수와 낮은 주파수의 각각의 변화에 따른 식각특성의 변화에 대한 이해를 할 수 있었다.