• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2138-2144
• /
• 2015

Multimodal dual camera system has a stereo-like configuration equipped with an infrared thermal and optical camera. This paper presents stereo calibration methods on multimodal dual camera system using a target board that can be recognized by both thermal and optical camera. While a typical stereo calibration method usually performed with extracted intrinsic and extrinsic camera parameter, consecutive image processing steps were applied in this paper as follows. Firstly, the corner points were detected from the two images, and then the pixel error rate, the size difference, the rotation degree between the two images were calculated by using the pixel coordinates of detected corner points. Secondly, calibration was performed with the calculated values via affine transform. Lastly, result image was reconstructed with mapping regions on calibrated image.

• Korean Journal of Optics and Photonics
• /
• v.34 no.3
• /
• pp.106-116
• /
• 2023

In this paper, we designed a coaxial dual camera incorporating two optical systems-one for the visible rays and the other for far-infrared ones-with the aim of capturing images in both wavelength ranges. The far-infrared system, which uses an uncooled detector, has a sensor array of 640×480 pixels. The visible ray system has 1,945×1,097 pixels. The coaxial dual optical system was designed using a hot mirror beam splitter to minimize heat transfer caused by infrared rays in the visible ray optical system. The optimization process revealed that the final version of the dual camera system reached more than 90% of the fusion performance between two separate images from dual systems. Multiple rigorous testing processes confirmed that the coaxial dual camera we designed demonstrates meaningful design efficiency and improved image conformity degree compared to existing dual cameras.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.158-164
• /
• 2009

The real time security system using web camera shall correspond in commensurate with it in real time through classifying moving object and analyzing the behavior. But, as to the detection of moving object in real time image through a camera, it is difficult to detect movement correctly according to the change of unnecessary noises, lighting conditions and screened phenomenon. This paper proposes real time security system by dual camera and ultrasonic sensor, a method of advanced detection in order to detect correct movement of specific object. That is, we could improve the tracing characteristics by using ultrasonic sensor as measurement factor of changed position and verify through experiments that the information interchanged between camera upwards and in front of it have effect on tracing a specific object continuously. The results of the experiment show that recognition rate of object was 97.4% and the correct tracing could be done lastingly in a phenomena of screening object.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.665-671
• /
• 2013

Even though a dual lens stereoscopic camera allows for convenient stereoscopic photography, the necessity for the research comes up, since the dual lens stereoscopic camera can cause visual discomfort during zoom-in due to the fixed convergence point. We propose a method based on which a convergence point can be adjusted to prevent visual discomfort during zoom-in for a dual lens stereoscopic camera. First, the relational model is classified into nine kinds and defined, depending on locations of focus, object, and convergence point. And then, the method to minimize visual discomfort is suggested by adjusting convergence point on the given model. We also implement the suggested methods with anaglyph computer graphic and demonstrate the superiority of them.

• Journal of Internet Computing and Services
• /
• v.22 no.3
• /
• pp.37-43
• /
• 2021

In this paper, we study how objects from front and back cameras can be recognized in real time in a mobile environment to segment regions of object pixels and synthesize them through image processing. To this work, we applied DeepLabV3 machine learning model to dual cameras provided by Apple's iOS. We also propose methods using Core Image and Core Graphics libraries from Apple for image synthesis and postprocessing. Furthermore, we improved CPU usage than previous works and compared the throughput rates and results of Depth and DeepLabV3. Finally, We also developed a camera application using these two methods.

• The Journal of Korea Robotics Society
• /
• v.15 no.3
• /
• pp.293-300
• /
• 2020

The purpose of our sensor system is to transparentize the large hydraulic manipulators of a six-ton dual arm excavator from the operator camera view. Almost 40% of the camera view is blocked by the manipulators. In other words, the operator loses 40% of visual information which might be useful for many manipulator control scenarios such as clearing debris on a disaster site. The proposed method is based on a 3D reconstruction technology. By overlaying the camera image from front top of the cabin with the point cloud data from RGB-D (red, green, blue and depth) cameras placed at the outer side of each manipulator, the manipulator-free camera image can be obtained. Two additional algorithms are proposed to further enhance the productivity of dual arm excavators. First, a color correction algorithm is proposed to cope with the different color distribution of the RGB and RGB-D sensors used on the system. Also, the edge overlay algorithm is proposed. Although the manipulators often limit the operator's view, the visual feedback of the manipulator's configurations or states may be useful to the operator. Thus, the overlay algorithm is proposed to show the edge of the manipulators on the camera image. The experimental results show that the proposed transparentization algorithm helps the operator get information about the environment and objects around the excavator.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1228-1238
• /
• 2003

This paper presents a new and practical method based on computer vision for detecting the monitor position where the user is looking. In general, the user tends to move both his face and eyes in order to gaze at certain monitor position. Previous researches use only one wide view camera, which can capture a whole user's face. In such a case, the image resolution is too low and the fine movements of user's eye cannot be exactly detected. So, we implement the gaze detection system with dual camera systems(a wide and a narrow view camera). In order to locate the user's eye position accurately, the narrow view camera has the functionalities of auto focusing and auto panning/tilting based on the detected 3D facial feature positions from the wide view camera. In addition, we use dual R-LED illuminators in order to detect facial features and especially eye features. As experimental results, we can implement the real-time gaze detection system and the gaze position accuracy between the computed positions and the real ones is about 3.44 cm of RMS error.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.633-640
• /
• 2016

In a dual lens stereoscopic camera, a convergence point determines the stereopsis effects of a video. When a user zooms an object, a convergence point is fixed since it is not coupled with a zoom function. Due to the fixed convergence point, it is possible for a zoom to cause the excessive binocular disparity resulting in visual discomfort. In this paper, to solve this problem, we build the relational model including all phenomena possible to arise and propose the adjustment methods of a convergence point by the positions of a focus, an object and a convergence point. We also evaluate the experiments measuring a binocular disparity and the subjective test to investigate the visual comfort. The results show that one of the proposed methods produced more comfortable 3D images to viewers than the others.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.96-100
• /
• 2006

We develop the Dual Head Star Tracker (DHST) to obtain the attitude information of science and Technology Satellite2 (STSAT-2). Because most of star sensor has only one head camera, star recognition is impossible when camera point to sun or earth. We therefore considered the DHST which can obtain star images from two spots simultaneously. That is, even though we fail a star recognition from an image obtained by one camera, it is possible to recognize stars from an image obtained by the other camera. In this paper, we introduce engineer model (EM) of the DHST and propose a star recognition and a star track algorithm.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.233-235
• /
• 2015

This study is to investigate the combustion instability of the variation of combustion chamber length in dual swirl gas turbine model combustor. When equivalence ratio was fixed at 1.1, as the length of the combustion chamber increases the value of the frequency decreased in 7kW while the value of the frequency was constant in 4kW. The analysis of flame behaviors by high speed camera was conducted to identify such trend.