• 대한지역사회영양학회지
• /
• 제13권3호
• /
• pp.418-425
• /
• 2008

The purpose of this study was to investigate correlations between bone mineral density (BMD) and dietary and non-dietary factors in female college students. The BMD of the subjects (n = 38) was measured using DEXA (Dual Energy X-ray Absorptiometry) at lumbar spine and three femoral sites including femoral neck, ward's triangle, and femoral trochanter. Three-day 24-hour dietary recall data were collected from each subject to assess consumption levels of nutrients and food groups. The mean (${\pm}SD$) values of age, age of menarche, height, weight, body mass index (BMI), waist-to-hip ratio (WHR), fat mass, and % body fat of the subjects were 21.34 (${\pm}1.73$) years, 13.1 (${\pm}1.2$) years, 161.3 (${\pm}5.0$) cm, 53.7 (${\pm}7.2$) kg, 20.6 (${\pm}2.6$) $kg/m^2$, 0.80 (${\pm}0.04$), 15.4 (${\pm}4.4$) kg, and 28.2 (${\pm}4.7$), respectively. The BMD values of lumbar spine, femoral neck, ward's triangle, and femoral trochanter as T-value were $1.150{\pm}0.13\;g/cm^2$, $0.932{\pm}0.11\;g/cm^2$, $0.850{\pm}0.13\;g/cm^2$, and $0.721{\pm}0.10\;g/cm^2$, respectively. The daily mean energy intake of the subjects was 1660.6 kcal. The intake levels of carbohydrate, calcium, iron, vitamin C, and folic acid were lower than the KDRIs, while those of fat, phosphorus, sodium, vitamin A, and vitamin $B_6$ were higher than the KDRIs. Significantly negative correlation were detected between consumption of fat and oils and the BMD of all sites measured (p < 0.05). Potato and starch intake was negatively correlated to the BMD of femoral neck and word's triangle (p < 0.05). The intake of cereals was found to be negatively correlated to the BMD of ward's triangle (p v 0.05). There was also negative correlation of intake of soybeans and products with the BMD of lumbar spine (p < 0.05). Weight and muscle mass were positively correlated to the BMD of both lumbar spine and femurs (p < 0.01). Significantly positive correlations between BMI, and fat mass and the BMD of lumbar spine were observed (p < 0.001). Additionally fat mass was positively correlated to the BMD of femoral neck. WHR and % body fat were positively correlated to the BMD of lumbar spine (p < 0.05). Negative correlation was found between a serum calcium level and the BMD of femoral neck (p < 0.05). In summary non-dietary factors generally showed significant correlations with the BMD of lumbar spine, while several dietary factors showed significant correlations with the BMD of femurs.

• 한방재활의학과학회지
• /
• 제31권4호
• /
• pp.117-127
• /
• 2021

Objectives Previously, we demonstrated that a 5% ethanol extract of unripe Rubus coreanus (5-uRCK) and ellagic acid has hypocholesterolemic and antiobesity activity in high-fat diet-fed animals. Therefore, we conducted a clinical study on the anti-obesity effect of 5-uRCK in 140 Korean adults (aged 19-70 years, body mass index (BMI) ≥25 kg/m²). Methods The participants were randomly assigned to two groups and were administered the placebo (n=70) or 5-uRCK extract (800 mg, n=70) daily for 12 weeks. The subjects were instructed to maintain their usual dietary intake and normal physical activity. Anthropometrics, body composition (dual-energy X-ray absorptiometry), and blood parameters were compared between the two groups. Results Average body weight and BMI did not show any significant changes; however, changes in upper body fat mass between the two groups was significantly different, as determined using analysis of covariance adjusted for baseline of percent body fat and drinking units. Moreover, Although not significant, the trunk fat mass and percent trunk fat tended to decrease after 5-uRCK supplementation. There was no significant difference in other laboratory biomarkers between the two groups. All safety parameters were within normal ranges in the both group. Conclusions In the present study, 5-uRCK significantly reduced upper body fat in obese subjects after 12 weeks, which indicates that it may help improve android-type obesity. Furthermore, the supplement is safe and well tolerated.

• Journal of Korean Neurosurgical Society
• /
• 제62권4호
• /
• pp.442-449
• /
• 2019

Objective : Bone mineral density (BMD) is an important consideration during fusion surgery. Although dual X-ray absorptiometry is considered as the gold standard for assessing BMD, quantitative computed tomography (QCT) provides more accurate data in spine osteoporosis. However, QCT has the disadvantage of additional radiation hazard and cost. The present study was to demonstrate the utility of artificial intelligence and machine learning algorithm for assessing osteoporosis using Hounsfield units (HU) of preoperative lumbar CT coupling with data of QCT. Methods : We reviewed 70 patients undergoing both QCT and conventional lumbar CT for spine surgery. The T-scores of 198 lumbar vertebra was assessed in QCT and the HU of vertebral body at the same level were measured in conventional CT by the picture archiving and communication system (PACS) system. A multiple regression algorithm was applied to predict the T-score using three independent variables (age, sex, and HU of vertebral body on conventional CT) coupling with T-score of QCT. Next, a logistic regression algorithm was applied to predict osteoporotic or non-osteoporotic vertebra. The Tensor flow and Python were used as the machine learning tools. The Tensor flow user interface developed in our institute was used for easy code generation. Results : The predictive model with multiple regression algorithm estimated similar T-scores with data of QCT. HU demonstrates the similar results as QCT without the discordance in only one non-osteoporotic vertebra that indicated osteoporosis. From the training set, the predictive model classified the lumbar vertebra into two groups (osteoporotic vs. non-osteoporotic spine) with 88.0% accuracy. In a test set of 40 vertebrae, classification accuracy was 92.5% when the learning rate was 0.0001 (precision, 0.939; recall, 0.969; F1 score, 0.954; area under the curve, 0.900). Conclusion : This study is a simple machine learning model applicable in the spine research field. The machine learning model can predict the T-score and osteoporotic vertebrae solely by measuring the HU of conventional CT, and this would help spine surgeons not to under-estimate the osteoporotic spine preoperatively. If applied to a bigger data set, we believe the predictive accuracy of our model will further increase. We propose that machine learning is an important modality of the medical research field.

• Nutrition Research and Practice
• /
• 제15권5호
• /
• pp.604-612
• /
• 2021

BACKGROUND/OBJECTIVES: We aimed to investigate the association of waist circumference (WC) with body composition among individuals with a normal body mass index (BMI) to distinguish muscle and fat mass, as both affect health differently. SUBJECTS/METHODS: We analyzed dual-energy X-ray absorptiometry data (derived from the Korean National Health and Nutrition Survey, which includes information on fat and lean mass) of 7,493 adults with a normal BMI. Subjects were categorized into four groups of increasing WC. The fourth group was defined as being centrally obese. Each number of subjects are as follows: 1,870, 695, 231, and 39 among men and 3,054, 1,100, 406, and 98 among women. We conducted a sex-stratified linear regression analysis of body composition according to WC group after adjustments for covariates. RESULTS: We observed a positive association of body fat with increasing WC in both men and women (all P for trend: < 0.001). The adjusted mean values for percent body fat with 95% confidence intervals (CIs) according to the four WC groups in ascending order were 17.8 (17.5-18.3), 21.0 (20.6-21.5), 22.1 (21.5-22.8), and 25.1 (24.2-26.1) in men and 29.7 (29.4-30.0), 32.0 (31.6-32.3), 32.9 (32.4-33.4), and 34.7 (33.2-36.1) in women. However, there was an inverted J-shaped association between muscle mass and WC. The fourth group had a higher percent body fat and lower muscle mass than other groups. The adjusted mean values for appendicular skeletal muscle mass index (kg/m²) with 95% CIs according to the four WC groups in ascending order were 7.55 (7.51-7.59), 7.62 (7.56-7.68), 7.65 (7.56-7.74), and 7.22 (7.04-7.41) in men and 5.83 (5.80-5.85), 5.96 (5.92-6.00), 6.03 (5.96-6.10), and 5.88 (5.73-6.03). CONCLUSIONS: There was a positive association between body fat and WC among individuals with normal BMI; conversely there was an inverted J-shaped association between lean body mass and WC. Our findings support the WC measurement should be included in obesity evaluations for adults with a normal BMI.

• 한국컴퓨터정보학회논문지
• /
• 제26권8호
• /
• pp.197-207
• /
• 2021

2형 당뇨병환자에서 골밀도는 다양하게 보고되고 있다. 최근의 여러 역학조사 연구에 의하면 2형 당뇨병 환자에서 골밀도 상태와 무관하게 골절 위험이 증가한다는 보고들이 많다. 본 연구에서는 전국민을 대상으로 한 표본조사로부터 얻은 질병관리본부의 국민건강영양조사 2008-2011년 자료를 이용하여 2형 당뇨병이 있는 50세 이상 남성 및 폐경후여성에서 골밀도를 확인하고자 하였다. 골다공증약물을 사용한 경우 및 당뇨병 이외에 골밀도에 영향을 미치는 질환 및 악성질환 등이 있는 대상은 제외하였다. 신체계측, 설문조사, 혈액검사 등과 함께 이중에너지흡수방사선을 이용하여 요추 및 대퇴골에서 측정한 골밀도 결과를 이용하였다. 연령, 체질량지수, 월 가구수입, 교육수준, 신체활동, 1일 칼슘섭취량, 혈중 비타민 D 농도를 포함하는 다중회귀분석을 시행한 결과 2형 당뇨병이 있는 50세 이상 남성 및 폐경후여성 모두에서 당뇨병이 없는 군과 비교하여 요추골밀도가 유의하게 높게 나타났다.

• 한국컴퓨터정보학회논문지
• /
• 제26권8호
• /
• pp.209-220
• /
• 2021

지방제외체질량(lean mass) 및 지방량(fat mass)과 같은 체성분이 골밀도에 미치는 영향은 매우 복잡하고 다양하게 나타나는 것으로 알려져 있다. 본 연구에서는 전국민을 대상으로 한 표본조사로부터 얻은 질병관리본부의 국민건강영양조사 2008-2011년 자료를 이용하여 50세 이상 남성(N=2,139) 및 폐경후여성(N=2,193)에서 체성분과 골밀도와의 관련성에 대해 조사하고자 하였다. 골다공증약물을 사용한 경우 및 골밀도에 영향을 미치는 질환 및 악성질환 등이 있는 대상은 제외하였다. 신체계측, 설문조사, 혈액검사 등과 함께 이중에너지흡수방사선을 이용하여 요추 및 대퇴골에서 골밀도를 측정하였고, 총지방제외체질량(TLM; total lean mass), 총지방량(TFM; total fat mass), 몸통지방량(TrFM; truncal fat mass) 등을 측정하였다. 체성분 지표들과 요추 및 대퇴골 골밀도는 유의한 양의 상관관계를 보였다. 연령, 체질량지수, 월 가구수입, 교육수준, 신체활동, 1일 칼슘섭취량, 혈중 비타민 D 농도를 포함하는 다중회귀분석을 시행한 결과 남녀 모두에서 TLM이 증가할수록 요추 및 대퇴골 골밀도가 유의하게 증가하였다. TLM의 가장 낮은 사분위수에 해당하는 군에서 요추 및 대퇴골 골밀도는 남녀 모두에서 다른 사분위수에 해당하는 군에 비해 유의하게 낮았다. TrFM은 위의 교란요인들을 보정한 이후 남성에서는 대퇴골전체 골밀도와 여성에서는 대퇴골경부 골밀도와 음의 상관관계를 보였다. 결론적으로 TLM은 50세 이상 남성 및 폐경후여성에서 골밀도를 유지하는데 매우 중요한 인자임을 확인할 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제54권6호
• /
• pp.412-421
• /
• 2021

Objectives: Non-alcoholic fatty liver disease (NAFLD) is an increasingly prevalent metabolic disease. Muscle is known to influence NAFLD development. Therefore, this study aimed to determine the relationships among low muscle mass, NAFLD, and hepatic fibrosis using various definitions of low muscle mass and NAFLD diagnostic methods, including magnetic resonance imaging-based proton density fat fraction (MRI-PDFF). Methods: This cross-sectional study included 320 participants (107 males, 213 females) from the Korean Genome and Epidemiology Study on Atherosclerosis Risk of Rural Areas in the Korean General Population cohort. Muscle mass was assessed using whole-body dual-energy X-ray absorptiometry and adjusted for the height squared, body weight, and body mass index (BMI). NAFLD was diagnosed using ultrasonography (US), MRI-PDFF, and the comprehensive NAFLD score (CNS). Hepatic fibrosis was assessed using magnetic resonance elastography. Multivariable logistic and linear regression analyses were performed to determine the aforementioned associations. Results: According to US, 183 participants (57.2%) had NAFLD. Muscle mass adjusted for body weight was associated with NAFLD diagnosed using US (odds ratio [OR], 3.00; 95% confidence interval [CI], 1.70 to 5.31), MRI-PDFF (OR, 2.00; 95% CI, 1.13 to 3.53), and CNS (OR, 3.39; 95% CI, 1.73 to 6.65) and hepatic fibrosis (males: β=-0.070, p<0.01; females: β=-0.037, p<0.04). Muscle mass adjusted for BMI was associated with NAFLD diagnosed by US (OR, 1.71; 95% CI, 1.02 to 2.86) and CNS (OR, 1.95; 95% CI, 1.04 to 3.65), whereas muscle mass adjusted for height was not associated with NAFLD. Conclusions: Low muscle mass was associated with NAFLD and liver fibrosis; therefore, maintaining sufficient muscle mass is important to prevent NAFLD. A prospective study and additional consideration of muscle quality are needed to strengthen the findings regarding this association.

• Journal of Korean Neurosurgical Society
• /
• 제65권1호
• /
• pp.96-106
• /
• 2022

Objective : The most common complication of anterior cervical discectomy and fusion (ACDF) is cage subsidence and maintenance of disc height affects postoperative clinical outcomes. We considered cage subsidence as an inappropriate indicator for evaluating preservation of disc height. Thus, this study aimed to consider patients with complications such as reduced total disc height compared to that before surgery and evaluate the relevance of several factors before ACDF. Methods : We retrospectively reviewed the medical records of 40 patients who underwent stand-alone single-level ACDF using a polyetheretherketone (PEEK) cage at our institution between January 2012 and December 2018. Our study population comprised 19 male and 21 female patients aged 24-70 years. The minimum follow-up period was 1 year. Twenty-seven patients had preoperative bone mineral density (BMD) data on dual-energy X-ray absorptiometry. Clinical parameters included sex, age, body mass index, smoking history, and prior medical history. Radiologic parameters included the C2-7 cobb angle, segmental angle, sagittal vertical axis, disc height, and total intervertebral height (TIH) at the preoperative and postoperative periods. Cage decrement was defined as the reduction in TIH at the 6-month follow-up compared to preoperative TIH. To evaluate the bone quality, Hounsfield unit (HU) value was calculated in the axial and sagittal images of conventional computed tomography. Results : Lumbar BMD values and cervical HU values were significantly correlated (r=0.733, p<0.001). We divided the patients into two groups based on cage decrement, and 47.5% of the total patients were regarded as cage decrement. There were statistically significant differences in the parameters of measuring the HU value of the vertebra and intraoperative distraction between the two groups. Using these identified factors, we performed a receiver operating characteristic (ROC) curve analysis. Based on the ROC curve, the cut-off point was 530 at the HU value of the upper cortical and cancellous vertebrae (p=0.014; area under the curve [AUC], 0.727; sensitivity, 94.7%; specificity, 42.9%) and 22.41 at intraoperative distraction (p=0.017; AUC, 0.722; sensitivity, 85.7%; specificity, 57.9%). Using this value, we converted these parameters into a bifurcated variable and assessed the multinomial regression analysis to evaluate the risk factors for cage decrement in ACDF. Intraoperative distraction and HU value of the upper vertebral body were independent factors of postoperative subsidence. Conclusion : Insufficient intraoperative distraction and low HU value showed a strong relationship with postoperative intervertebral height reduction following single stand-alone PEEK cage ACDF.

• Animal Bioscience
• /
• 제35권5호
• /
• pp.690-697
• /
• 2022

Objective: This study aimed to evaluate the effect of the ad libitum and restricted feeding regimen on fasting heat production (FHP) and body composition. Methods: Twelve Hubbard broilers breeders were selected with the same body weight and submitted in two feeding regimes: Restricted (T1) with feed intake of 150 g/bird/d and ad libitum (T2). The birds were randomly distributed on the treatments in two runs with three replications per treatment (per run). The birds were adapted to the feed regimens for ten days. After that, they were allocated in the open-circuit chambers and kept for three days for adaptation. On the last day, oxygen consumption (VO₂) and carbon dioxide production (VCO₂) were measured by 30 h under fasting. The respiratory quotient (RQ) was calculated as the VCO₂/VO₂ ratio, and the heat production (HP) was obtained using the Brower equation (1985). The FHP was estimated throughout the plateau of HP 12 hours after the feed deprivation. The body composition was analyzed by dual-energy X-ray absorptiometry scanning at the end of each period. Data were analyzed for one-way analysis of variance using the Minitab software. Results: The daily feed intake was 30 g higher to T2 (p<0.01) than the T1. Also, the birds of the T2 had significatively (p<0.05) more oxygen consumption (+3.1 L/kg^0.75/d) and CO₂ production (+2.2 L/kg^0.75/d). That resulted in a higher FHP 359±14 kJ/kg^0.75/d for T2 than T1 296±17.23 kJ/kg^0.75/d. In contrast, the RQ was not different between treatments, with an average of 0.77 for the fasting condition. In addition, protein and fat composition were not affected by the treatment, while a tendency (p<0.1) was shown to higher bone mineral content on the T1. Conclusion: The birds under ad libitum feeding had a higher maintenance energy requirement but their body composition was not affected compared to restricted feeding.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권1호
• /
• pp.1-8
• /
• 2023

As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.