• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.78-81
• /
• 1999

The position and time errors of a conventional L1-band GPS receiver (1575.42MHz) are known to be about 100 m and 70 ns, respectively. These errors are mainly due to the propagation delay of GPS satellite signals through ionosphere. Various L1/L2 dual-band GPS receivers are normally used to compensate for those position and time errors by detecting an accurate propagation delay. These receivers detect the propagation delay difference between the L1 and L2 signals based on the fact that the propagation delay through ionosphere is dependent on frequency and, from which, calculate an accurate propagation delay of the GPS signals through ionosphere. In this paper, we analyzed the architecture of a L1/L2 dual-band CPS receiver by high-level simulations with Synopsys's COSSAP Tool.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.31-34
• /
• 2004

본 논문에서는 현재 위성 DMB 국내 표준으로 채택되어 있는 System E 방식의 Dual Mode 신호 전송에 따른 신호변환시 Time Delay측정 방법에 대해서 제안을 하였다. 제안된 방식의 경우 아날로그 방식이 아닌 디지털 방식으로 정확한 Time Delay 측정이 가능하다. 그리고 위성 DMB Gap Filler System의 입 출력 단자를 통하여 측정이 가능함으로 측정값에 대한 신뢰성 확보가 가능하며 자동측정 방식임으로 측정시 발생될 수 있는 Human Error를 최소화 할 수 있다는 장점을 가지고 있다.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.71-81
• /
• 2014

Time synchronization system using dual frequency bands is designed and the error sources are analyzed for alternative synchronized-pseudolite navigation system (S-PNS) which aims at military application. To resolve near/far problem, dual frequency band operation is proposed instead of pulsing transmission which degrades level of reception. In dual frequency operation H/W delay should be considered to eliminate errors caused by inter-frequency bias (IFB) difference between the receivers of the pseudolites and users. When time synchronization is performed across the sea, multipath error is occurred severely since the elevation angle between pseudolites is low so total reflection can be happened. To investigate the difference of multipath effects according to location, pseudolites are set up coastal area and land area and performances are compared. The error source related with tropospheric delay is becoming dominant source as the coverage of the PNS is broadening. The tropospheric delay is measured by master pseudolite receiver directly using own pseudorange and slave pseudorange. Flight test is performed near coastal area using S-PNS equipped with developed time synchronization system and test results are also presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.182-189
• /
• 2014

A tapped delay line time-to-digital converter (TDC) can be easily implemented using internal carry chains in a field-programmable gate array, and hence, its use is widespread. However, the tapped delay line TDC suffers from performance degradation because of differences in the delay times of dedicated carry chains. In this paper, a dual edge measurement method is proposed instead of a typical step signal to the delay cell to compensate for the performance degradation caused by wide-delay cells in carry chains. By applying a pulse of a fixed width as an input to the carry chains and using the time information between the up and down edges of the signal pulse, the timing accuracy can be increased. Two dedicated carry chain sites are required for the dual edge measurements. By adopting the proposed dual edge measurement method, the average delay widths of the two carry chains were improved by more than 35%, from 17.3 ps and 16.7 ps to 11.2 ps and 10.1 ps, respectively. In addition, the maximum delay times were improved from 41.4 ps and 42.1 ps to 20.1 ps and 20.8 ps, respectively.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2020

A significant growth in local air traffic volume is leading to airway congestion and flight delays especially for Incheon-China and Incheon-Europe sectors. A key method to increase the airway capacity is to place a supplemental airway parallel to the existing one and in cooperation between the aviation authorities between China and Korea, a dual airway track was implemented on December 6, 2018. Here, we use airline A's flight data to analyze the congestion change effect of the new airway. Results show total delay time to Europe is reduced 51% (13.4 to 6.6 minutes) as the delay distribution for 16-30 minutes, 31 minutes and greater decreased from 23.2% to 8.2% and 8.7% to 1.0% respectively. The delay to China also decreased but the drop is not as significant as flights to Europe. This is caused by the difference in flight distance, traffic volume, and characteristics of flights landing and transiting China. Flights to Europe show a broad distribution in altitude allocation and reduction in aircraft separation demonstrating the effectiveness of a dual airway track.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.3
• /
• pp.1-14
• /
• 1994

In this paper, an analytical model of the message delay in the DQDB (Distributed Queue Dual Bus) network is investigated. The DQDB network has been adopted as a subnetwork for the IEEE 802 MAN (Metropolitan Area Network) standard. The DQDB network consists of two high speed undirectional buses and a series of stations attached to both of the buses. Massages arriving at each station consists of severla packets according to its size. This system is approximated into " $B^{[x]}$/G/1 with exceptional first service queueing " by defining the concept of service time on a packet. The service time for a packet is defined as the time from the instant the packet arrives at the transmission buffer until the time the packet is fully transmitted. By using the BASTA property and the average work in the system, the mean message delay time is obtained.age work in the system, the mean message delay time is obtained.d.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.305-311
• /
• 2019

In this study, present the most useful delay scan time by statistical analysis of SUVm data for 30 suspected pancreatic cancer patients. Two statistical analysis and a mathematical model was applied to the theoretical formula by glucose and insulin mechanics, and a mathematical model was created. Statistical analysis was performed via Metlab p/g. Optimal delay scan time was suggested by Metlab p/g for the change of SUV value over time.In this study, for diagnosis pancreatic cancer by dual time point PET/CT, propose optimal delay scan time 131.5 minuts. The proposed delay scan time showed statistical reliability applicable to the diagnosis of pancreatic cancer (p<0.05). Delayed scanning with the suggested delay scan time of 131.5 minutes is considered to be useful for the diagnosis of pancreatic cancer compared to general PET / CT scan.hen the delayed test is performed with the proposed delay scan time 131.5 minuts, Compared with general PET/CT scans.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3181-3183
• /
• 2000

As the fact that the simple data of text and sound in early year have been changed to be high quality images and sounds. PLL(Phase-Locked Loop) system plays an important role in communication system. VCO(Voltage Controlled Oscillator) is the most important part in PLL system because it can have critical effects on operation of PLL. Recently, it has been raised the necessity of high speed and high accuracy circuit application. In this paper, a new differential voltage clamped VCO using negative-skewed path is suggested. Using a dual-delay scheme to implement the VCO, higher operation frequency and wider tuning are achieved simultaneously. The dual-delay scheme means that both the negative skewed delay paths and the normal delay paths exist in the same ring oscillator. The negative skewed delay paths decrease the unit delay time of the ring oscillator below the single inverter delay time. As a result, higher operation frequency can be obtained. The whole characteristics of VCO are simulated by using HSPICE. Simulation results show that the resulting operating frequencies are 50% higher than those obtainable from the conventional approaches.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.4
• /
• pp.295-304
• /
• 2000

In the teleoperation system, force and velocity signals are communicated between a master and a slave robot. The addition of force feedback to a teleoperation system benefits the operator by providing more information to perform given tasks especially for tasks requiring contact with environment. When the master and slave arms are located in different places, time delay is unavoidable and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The control scheme proposed in this paper is based on the estimator with virtual master model. Delayed signal from the master robot can be replaced by the estimated signal with the virtual master model. This control scheme makes the teleoperation system stable for the given time delay while the conventional scheme is not. This new control scheme is verified through numerical simulations and an experiments using the dual axis testbed of the teleoperation system.

• Journal of the Korean Society of Combustion
• /
• v.2 no.1
• /
• pp.17-27
• /
• 1997

It is well known that NOx formation has a strong dependence on the maximum temperature and correspondingly with the maximum chamber pressure of a closed combustion system. However, in a case of impinging-jet-flame (IJF hereafter) combustion with opposed dual pre-chambers, low $NO_x$ formation with high pressure could be achieved, but its mechanism has not been clearly understood so far. In this study, a three-dimensional analysis is adopted to resolve time-variant local properties that might indicate the mechanism of IJF combustion. Numerical results are verified by comparing them with experiments. The IJF combustion in a vessel with no pre-chamber, with single pre-chamber, and with dual pre-chambers is studied. The orifice diameter and the volumetric ratio of pre-chamber are used as geometric parameters. The effects of main-chamber ignition delay time and combustion time of main-chamber, orifice exit velocity, orifice exit temperature, turbulent kinetic energy of main-chamber and spatial distribution of temperature in the latter stage of combustion are investigated. A longer main-chamber ignition delay and a shorter main-chamber combustion time suppress the formation of high temperature region with respect to mean temperature, which consequently results in less NO production.