• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.6
• /
• pp.273-282
• /
• 2015

In this study, shaking table test has been carried out for the dual frame passive control system for seismic performance verification of the proposed system. The proposed system was separated into two independent frameworks that are strength resistant core and frame structure by connecting to the damper. Moreover, the seismic performance improvement of the proposed system has been verified by comparing and analyzing the experimental results of the proposed system with an existing core system. As a result of the shaking table test, acceleration and displacement responses of dual-frame vibration control system are decreased than those of the existing strength resistant type core system. In the case of the core system, while the damage was concentrated on the column of first floor, the damage of the dual system was dispersed in each layer. The damage also was concentrated on the damper, almost no damage occurs to the structural members. It has been emphasized that installed dampers in the proposed dual system reduce the input energy of whole structure by absorbing seismic input energy, which leads overall system damage to be reduced.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.293-303
• /
• 2002

This paper implements optimized Time Scale Modification (TSM) system using ITU G.729 speech decoder and Dual SOLA algorithm. The proposed system assume 8 Kz sampling rate, 80 samples/frame input speech from the ITU G.729 speech Decoder and the TSM (Time Scale Modification) feature of Dual SOLA produces the high quality output speech that was slow-down or speed up as a user's choice. Especially, the proposed Optimized Dual SOLA base on various simulations and theoretical analysis, and the additional interpolation procedure of the speech makes it possible to setup high performance integrated TSM system at the maximum time scale modification rate. The system performance is analyzed and verified with various input speech and playback speed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.23-28
• /
• 2013

In this paper, background noise reduction method using dual microphone is proposed in mobile environment. Each Signal, reference and primary, would be replaced by microphone input signals, which were measured by reference and primary microphones, and then, noise reduction was performed using FDAF. After then, residual and background noise would be estimated and reduced by MMSE-LSA. For consistent noise reduction performance, result of VAD that could be caculated by PLD between two microphones was used.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1835-1840
• /
• 2008

In this paper, a dual band H-shaped microstrip patch antenna is designed for RFID application. Using shorting pin and H shaped for dual resonators and control dual frequency independently. The antenna shows a good performance at the frequency, 912MHz and 2.45GHz for the radiation characteristic and input impedance matching, as well. The reflection is lower than -10dB and a good directivity higher than 3dB is achieved for both frequency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.41-44
• /
• 1998

Dual mode resonators were fabricated using high temperature superconductor. The deposited material was $Y_1Ba_2Cu_3O_{7-x}$(YBCO) on MgO(100) substrate using pulsed laser deposition. Dual mode resonators were patterned by standard photolithography process and wet etching. At the back-side of the substrate, the ground plane with the metal layer of Ti and Ag was fabricated. The transition temperatures of YBCO films were 85-88 K, and network analyzer was used for testing the performance of the resonators. The input/output feedline angles of each resonator were $60^{\circ}$and $100^{\circ}$. The resonant frequency of resonators was 10 GHz. In this paper, dual mode resonator was fabricated for the application of satellite communication.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.152-156
• /
• 2013

This paper presents a fast-lock dual-loop successive approximation register-controlled duty-cycle corrector (SARDCC) circuit using a mixed (binary+sequential) search algorithm. A wider duty-cycle correction range, higher operating frequency, and higher duty-cycle correction accuracy have been achieved by utilizing the dual-loop architecture and the binary search SAR that achieves the fast duty-cycle correcting property. By transforming the binary search SAR into a sequential search counter after the first DCC lock-in, the proposed dual-loop SARDCC keeps the closed-loop characteristic and tracks variations in process, voltage, and temperature (PVT). The measured duty cycle error is less than ${\pm}0.86%$ for a wide input duty-cycle range of 15-85 % over a wide frequency range of 0.5-2.0 GHz. The proposed dual-loop SARDCC is fabricated in a 0.18-${\mu}m$, 1.8-V CMOS process and occupies an active area of $0.075mm^2$.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1071-1088
• /
• 2017

For dual-hop multiple-input multiple-output (MIMO) decode-and-forward relaying systems, we propose a selective relaying scheme that uses orthogonal space-time block code (OSTBC) and transmit antenna selection with maximal-ratio combining (TAS/MRC) or vice versa at the first and second hops, respectively. The aim is to achieve an asymptotically identical performance to the dual-hop relaying system with only TAS/MRC, while requiring lower feedback overhead. In particular, we give the selection criteria based on the antenna configurations and the average channel powers for the first and second hops, assuming Rayleigh fading channels. Also, the numerical results are shown for the outage performance comparison between the dual-hop DF relaying systems with the proposed scheme, only TAS/MRC, and only OSTBC.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.899-909
• /
• 2015

A dual-input boost-buck converter with coupled inductors (DIBBC-CI) is proposed as a thermoelectric generator (TEG) power conditioner with a wide input voltage range. The DIBBC-CI is built by cascading two boost cells and a buck cell with shared inverse coupled filter inductors. Low current ripple on both sides of the TEG and the battery are achieved. Reduced size and power losses of the filter inductors are benefited from the DC magnetic flux cancellation in the inductor core, leading to high efficiency and high power density. The operational principle, impact of coupled inductors, and design considerations for the proposed converter are analyzed in detail. Distributed maximum power point tracking, battery charging, and output control are implemented using a competitive logic to ensure seamless switching among operational modes. Both the simulation and experimental results verify the feasibility of the proposed topology and control.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.188-194
• /
• 2002

DBS is utilized as very useful media in information-oriented society because it covers wide service area and provide high quality services. But DBS needs skill that can receive DBS signal at move. In this paper, it is considered a development of a device to receive DBS and design of a low noise downconverter that use tracking antenna to receive DBS at mobiles unit and ships which navigate in Korea peninsula coast. The structure of dual phase LNB is composed of LNA, BPF, oscillator, mixer, and IF amplifier. And for the position tracking, two input-output phase performed in phase. Measured results showed good performance that with respect to input signal 11.7 GHz~12.2 GHz, noise figure is 0.87 dBmax and conversion gain 62 dB, temperature characterization ${\pm}400$ kHz in respect to - 30 to $60^{\circ}C$, and phase noise -101 dBc/Hz in respect to offset 100 kHz.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.214-225
• /
• 2016

Gasification is one of the important contribution to resource recycling by conversion of biomass to a variety of energy sources such as alcohol, SNG etc., and to global warming prevention by reduction of green house gases such as $CO_2$. The aim of this study is to draw the optimal operation condition of dual fluidized-bed gasifier with biomass fuel, to verify SNG production efficiency and to establish the basis for the domestic commercialization of dual fluidized bed gasification. As a result, dual fluidized-bed gasifier has the optimal conditions at $826^{\circ}C$ with steam input 1,334 g/hr, air input 5.56 L/min. The carbon conversion is 81% and SNG production efficiency was $CH_4$ 92%.