• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.46-48
• /
• 2003

미국 페르미연구소에서 현재 수행되고 있는 고에너지물리 실험의 하나인 CDF 실험에서는 현재 303대의 Dual CUP 클러스터를 이용한 중심분석용팜(CAF, Central Analysis Farm)을 페르미 연구소 내에 구성하여 실제 데이터 처리 및 모의 시늉 데이터를 생산하는데 사용하고 있다. 그러나 페르미 연구소에서의 중심분석용팜(CAF)은 향후 그 자원이 충분치가 못하므로, 이에 참여하고 있는 여러 나라의 컴퓨팅 자원들을 공유할 수 있어야 한다. 따라서, 한국그룹은 경북대학교 고에너지물리연구소에 있는 PC 클러스터를 활용하여 탈중심분산팜 (DCAF, DeCenteralized Analysis Farm)을 국제공동연구로 설계하여 테스트베드를 구축하였다. 이 구성에는 CAF의 기술뿐만 아니라 페르미 연구소라는 원격에 있는 실험 데이터를 이용하여 job을 수행하므로 데이터 전송 기술인 SAM(Sequential data Access via Meta-data) 및 Kerberos의 보안 시스템, 그리드(Grid)를 포함하는 모든 IT 기술의 종합으로 이루어져있다.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.391-395
• /
• 2009

For the conversion of domestic waste-wood into energy, a fixed bed gasifier ($0.9 m{\times}2.4 m$) having the capacity of 2 ton/day was designed and constructed. The dual knife valve was used to feed waste-wood of which size was 3~5 cm and a rotary stoker system was installed in the bottom of gasifier. The pilot gasification system consisted of feeding system, fixed bed gasifier, gravity fine particle collector, heat exchanger for syngas cooling, ID fan, and cooling tower. The operation temperatures of gasifier were $700{\sim}1000^{\circ}C$ and the concentrations of syngas were CO: 25~40 vol%, $H_2$: 7~12 vol%, $CH_4$: 2~4 vol%, $CO_2$: 12~24 vol%. The calorific value of syngas was $1100{\sim}1500kcal/Nm^3$ and was enough to be applied in the industrial combustor. Also the gas engine was operated by using syngas from biomass gasifier and produced 1~4 kW of power.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.516-521
• /
• 2012

This study developed a simple model to investigate effects of important operating parameters on performance of a bubbling-bed adsorber and regenerator system collecting $CO_2$ from flue gas. The chemical reaction rate was used with mean particles residence time of a reactor to determine the extent of conversion in both adsorber and regenerator reactors. Effects of process parameters - temperature, gas velocity, solid circulation rate, moisture content of feed gas - on $CO_2$ capture efficiency were investigated in a laboratory scale process. The $CO_2$ capture efficiency decreased with increasing temperature or gas velocity of the adsorber. However, it increased with increasing the moisture content of the flue gas or the regenerator temperature. The calculated $CO_2$ capture efficiency agreed to the measured value reasonably well. However the present model did not agree well to the effect of the solid circulation rate on $CO_2$ capture efficiency. Better understanding on contact efficiency between gas and particles was needed to interpret the effect properly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.87-92
• /
• 2006

The rocket grade hydrogen peroxide has been widely used as a monopropellant in propulsion systems. In the present paper, we described an experimental study of a catalytic reactor that employs two stage catalyst beds to enhance the low temperature performance of the reactor inlet. $K_2MnO_4$ was chosen as the catalyst for the initial stage of the reactor bed for its superior behavior in the low temperature regime. Alumina sol-gel method was successfully applied for coating $K_2MnO_4$ on a reactor bed of cordierite monolith. LSC was used for the catalyst of the second stage of the reactor. The reactor with combined catalyst beds was built and tested to exhibit superior performance in low temperature regime and high decomposition efficiency.

• The Korean Journal of Health Service Management
• /
• v.6 no.3
• /
• pp.95-106
• /
• 2012

This study was described and analyzed health care system in Lao Cai, Vietnam. We analyze organization and delivery of health care system, health care resources, heath care facilities, heath care finances, and health index in Lao Cai, Vietnam. Lao Cai Province is a mountainous region located on the Chinese border in North-West Vietnam, with numerous ethnic minority groups. Health care organization and delivery system in Lao Cai Province is well formed Province-District-Commune level with Vietnam Government's Socialism. However, health care personnels are concentrated in the major city and is lacking in commune level. Lao Cai province has only two general hospital and is lacking number of beds. Lao Cai province's health care sector is insufficient financial support because the primary goal of the Vietnam government is economic development. Ethnic minority groups in Lao Cai have a dual burden of disease and health. To solve this problem, it is dispatched health care personnel to the commune level taking advantage of the well health care organization and delivery system in Lao Cai. It is also necessary to modernize hospital and improve number of bed. In conclusion, it will be improved the quality of life of residents and be able to achieve fairness among district through the enhancement of the health care system in Lao Cai province.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.298-302
• /
• 2016

Currently, logistics are in small quantities and in diverse forms, and the amounts are continuously increasing. Railway logistics however are losing their market share every year mainly due to low operation speed and loading time, which means the trucks are covering the most of the freights. In order to solve these situations, this paper proposed the high speed freight train as working multi-modality with other modes to make effective transshipment. The high speed freight train has maximum operation speed of 300km/h and electric power to run centralized power supply. There are large dual door system, bogie system covering fluctuating load of 15[ton], automatic loading device, ULD(unit load device) bed and ULD locking system in this freight rolling stock. We calculated the performance of powering and braking capacity for this train and proposed how many vehicles are composed of train set. The results in this paper can help to make a decision to define the technical specification of High-speed freight train for the efficiency of rail freight service.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.395-402
• /
• 2003

Standard ginseng seedling, selected after one year's rearing in the seedling bed has been conventionally transplanted in Korea. Recently, the direct seeding areas have been increasing to product high quality ginsengs for red-ginseng processing. Reciprocating push-rod brush, holed-roller and vacuum suction seeders, planting with 30 ${\times}$ 30mm spacings and adjustable to the folds were designed and theirs performances were evaluated. The developed three types of seeders reliably performed at the success rate over 95% with less than 10% in slip rate, and could be used a seeder for the greater spacings by adjusting metering parts. The research concluded that the vacuum suction seeder was the most feasible and practical with the greatest metering success and the least slip among three type seeders of the reciprocating push-rod brush, holed-roller and vacuum suction seeders. The vacuum suction seeder holds a seed with each needle nozzle using the negative pressure created by a vacuum pump. The capacity was 24.5 times greater than a man power at the speed of 5 m/min.

• Health Policy and Management
• /
• v.10 no.4
• /
• pp.75-98
• /
• 2000

This study applied Data Envelopment Analysis(DEA) and Ratio Analysis and Regression Analysis to a set of Korean Public Corporation Medical Centers to evaluate their relative human resource efficiencies. The output measure used in this study was based on health insurance system which was used in both in-patient departments and out-patient departments. Inputs included working time of the doctors, nurses, technicians, and managerial department staff. Based on the data provided on the inputs and outputs, the analysis showed 23 of the 34 hospitals to be relatively inefficient. Each hospital with an efficiency rating of less than 1 was considered relatively inefficient. In addition, managerial strategies based on dual variables were constructed to indicate the manner In which inefficient hospitals may be made efficient. A subsequent analysis of t-test revealed that the bed occupancy rate, medical revenue per 100beds, value added revenue per staff, medical revenue per staff were statistically significant. The results of this study suggest the DEA is a promising tool for evaluating relative human resource efficiency in hospitals which have multiple inputs and outputs and where the efficient production function is not specifiable with any precision. But it is considered that efficiency evaluations may be most effective]y accomplished by Incorporating a combination of methodologies such as ratio analysis and regression analysis.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.55-60
• /
• 2012

When operating a surveillance system in the maritime environment, its stabilization performance is degraded due to undesirable disturbance motions. For accurate target pointing of a 2-axes surveillance system on shipboard, the kinematic stabilization is first applied, which compensates a deviated motion via coordinate transformations of attitude information. Resultantly, the stabilization error is no longer reduced due to less accuracy of a MEMS sensor and kinematic constraint, leading to introduction of the image stabilization as a complementary function. And for real-time execution of the present dual stabilization scheme, a HILS (Hardware In the Loop Simulation) test bed including 6-dof motion simulator has been constructed, and through the obtained HILS data, it has been confirmed that the stabilization is successfully.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2017

Recently, with the ever-increasing complexity of industrial robot systems, it has been greatly attention to adopt a multi-core based motion controller with high cost-performance ratio. In this paper, we propose a software architecture that aims to utilize the computing power of multi-core processors. The key concept of our architecture is to use shared memory for the interplay between threads running on separate processor cores. And then, we have integrated our proposed architecture with an industrial standard compliant IDE for automatic code generation of motion runtime. For the performance evaluation, we constructed a test-bed consisting of a motion controller with Preempt-RT Linux based dual-core industrial PC and a 3-axis industrial robot platform. The experimental results show that the actuation time difference between axes is 10 ns in average and bounded up to 689 ns under $1000{\mu}s$ control period, which can come up with real-time performance for industrial robot.