• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.420-424
• /
• 2009

Since the sesame pod gets open gradually from the lower to upper parts of the stem due to its different maturity during cutting and binding of sesame, at the conventional work for shattering, the procedures of drying and shattering are repeated two or three times. Therefore, in this study, a drying stand with transparent plastic cover was developed to complete the drying and shattering at the same time. Owing to the developed drying stand, simple drying work, the area for drying was reduced prevention of sesame seeds from loss and rain are available. The performance of developed drying stand was evaluated. Before the drying stand was developed, the conventional method and shattering machine for shattering sesame required at least three times of operation for complete shattering. But After drying stand was developed, the complete shattering works was possible with only one time shattering operation. Finally, the developed drying stand could prevent approximately 5% of the total sesame seed production from loss during drying and shattering works.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.325-328
• /
• 2007

본 연구에서는 소형가스터빈의 고공 및 속도시험, 환경시험 등을 수행하기 위해, 러시아의 SCIAM 연구소에 설치된 기존 대형 시험설비를 개량하여, C-9N 시험스탠드를 개발하는 과정에서 수행된 개념적 설계의 내용을 다루고 있다. 본 시험 스탠드는 환경모사 시스템, 항온유지 시스템, 냉각/건조 시스템, 추력측정 시스템, SAR 시스템으로 구성되어 있다.

• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.425-433
• /
• 2009

The developed final shattering machine for labor-saving mechanization of shattering of sesame consisted of input part, shattering part, re-shattering part for unshattered pod and pneumatic sorter. The bundle of sesame was held as upside down and fed into the machine continuously. Then, the fed bundle of sesame was shattered by side shock and agitation. The performance of shattering for the sun dried bundle of sesame of conventional manual work and final shattering machine was compared. Since the shattering ratio measured by the final machine was 97.2% at the first operation, in case of fully dried sesame by drying stand, the harvest of sesame can be completed by only one time shattering operation. The work hour per area of 10 a for the mechanical work and the manual work were 0.3 hour and 13.9 hour, respectively. The total shattering ratio of the final machine with vertical feedings of bundle of sesames was 97.2%.

• 가정과삶의질연구
• /
• 제23권6호
• /
• pp.1-13
• /
• 2005

The aim of this study is to investigate the housework space viewed from housewives and husband in dual-earner families. For this study, depth-interview method were used to collects the data. The depth-interview were conducted on the eight heusewives and two husbands in dual-earner families in Jinju and Gwangju in April 2005. The narratives were then analyzed to discover the demands of the kitchen and laundry room. The major results were as follows: 1) Dual-earner families want the kitchen design is they can share housework with their spouses, such as kitchen facing the front side of the floor plan and island counter. In addition, they want spacious, adjustable(flexible), visible storage to enable the housewives to work with their spouse efficiently. Space for Kimchi refrigerator should be considered in the kitchen. 2) They want the noise-free laundry because the interviewers did their laundry work in the night time. Also, they want a multi-purpose laundry mm where machine washing, hand washing, drying and ironing can be done. In addition, for hand-washing wives and husbands, specific space and facilities where they can hand washing on stand posture were needed.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2002년도 학술대회지
• /
• pp.212-226
• /
• 2002

North American ginseng production may have been maximized in the traditional growing areas in the last decade and further increases may be in woods grown root, for niche markets. The marketplace demands high quality roots. Most problems leading to low quality roots start with the grower and can be avoided. These include poor site selection, inadequate soil drainage, untimely and poorly applied pesticides, and neglect of good sanitary practices. Selection of low lying sites increased the plant damage from frost in Ontario in May 2002. Seeding is still the major method of propagation of ginseng in spite of some success in culturing different parts of the plant. Opportunities exist for shortening the stratification period of North American ginseng seed to allow spring planting. This may reduce disease incidence. Since only one-third of ginseng seed sown ultimately produces plants harvested after 3 years any approach that reduces disease incidence and improves seed germination, seedling emergence and crop stand must be pursued. Disease is the major problem in ginseng cutivation from seed stratification, soil preparation prior to planting, right through to drying of the roots. Replant disease remains as an unresolved problem and needs full characterization and new approaches for control. Much progress has been made in research and related extension activities in disease control although challenges will arise such as with Quintozene and its replacement with Quadris for control of diseases caused by Rhizoctonia. Decreased labor populations and increased associated costs for ginseng production are causing rapid mechanization in every aspect of the ginseng industry. Engineers, machinery dealers, and fabricators, and growers are being challenged to increase efficiency by mechanization.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.37-42
• /
• 1967

이 시험(試驗) 전남(全南) 광양연습림(光陽演習林)에 있는 약(約) 40여년생(餘年生)의 리기다소나무임분(林分)에서 하계벌(夏季伐)과 동계벌(冬季伐)을 실시(實施)한 다음 조재목(造材木)에 완전박피(完全剝皮), 외피박피(外皮剝皮)(내피부재(內皮付材)) 그리고 무박피처리(無剝皮處里)를 하여 이들이 천연건조(天然乾燥)에 미치는 박피처리(剝皮處理)의 효과(効果)를 구명(究明)하기 위(爲)하여 실시(實施)되었다. 이 시험(試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. (1) 완전박피재(完全剝皮材)는 대체(大體)로 내피부재(內皮付材)나 무박피재(無剝皮材)에 비교(比較)하여 속(速)히 건조(乾燥)하나 건열피해(乾裂被害)를 많이 이르킨다. (2) 하계벌(夏季伐)을 실시(實施)한 완전박피재(完全剝皮材), 내피부재(內皮付材) 및 무박피재(無剝皮材)를 비교(比較)하면 완전박피재(完全剝皮材)와 내피부재(內皮付材) 및 무박피재간(無剝皮材間)에는 차이(差異)가 인정(認定)되어도 내피부재(內皮付材)와 무박피재간(無剝皮材間)에는 차이(差異)가 없다. (3) 동계벌(冬季伐)을 실시(實施)한 경우 내피부재(內皮付材)와 완전박피재간(完全剝皮材間)에는 차이(差異)가 없어도 완전박피재(完全剝皮材) 및 내피부재(內皮付材)와 무박피재간(無剝皮材間)에는 현저(顯著)한 차이(差異)가 있었다. 따라서 내피부재(內皮付材)의 건조효과(乾燥効果)는 완전박피재(完全剝皮材)의 효과(効果)와 같다고 생각(生覺)한다. (4) 이 시험(試驗)에서 하계벌(夏季伐)의 완전박피재(完全剝皮材) 그리고 동계벌(冬季伐)의 내피부재(內皮付材) 및 완전박피재(完全剝皮材)는 모두 4개월(個月) 이내(以內)에 평형함수량(平衡含水量)에 도달(到達)한다고 예상된다.

• 한국약용작물학회지
• /
• 제25권4호
• /
• pp.209-216
• /
• 2017

Background: Dehisced ginseng seeds need to be stored at cold temperatures for around 3 months to break their physiological dormancy, and thus, to aid in gemination. In the presence of high moisture in such an environment, seed spoilage and pre-germination may lower seed quality and productivity. To improve seed quality during cold-stratification, the effects of seed dehydration and temperature were tested. Methods and Results: In early December, dehisced ginseng seeds were dehydrated at 4 different levels and stored at $2^{\circ}C$ $-2^{\circ}C$, and $-20^{\circ}C$ for 3 months. Germination was carried out on the filter papers moistened with distilled water; emergence of root, shoot, and seed spoilage were assessed. Seed viability was examined by the tetrazolium test. More than 90% of the seeds stored at $2^{\circ}C$ and $-2^{\circ}C$ without drying or endocarp dehydration germinated, but seeds that were dehydrated to have a moisture content (MC) below 31% showed poor germination and lost their viability. In addition, the seeds stored at $-20^{\circ}C$ failed to show effective germination. Conclusions: Seed storage after endocarp dehydration might help to improve seed quality and increase seedling's ability to stand during the spring-sowing of ginseng.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• 한국작물학회지
• /
• 제34권1호
• /
• pp.81-85
• /
• 1989

진주조 재배에서 가장 중요한 재배기술의 하나는 파종직후 신속, 균일하게 출아시켜 건강하게 자라도록 해주면서 단위면적당 입모주수를 확보하는데 있다. 본 시험은 진주조의 파종전 침종 및 파종심도가 종자의 휴면타파, 발아 및 출아에 미치는 영향을 구명하기 위하여 1985~87년 실시한 시험결과는 다음과 같다. 1. 진주조는 1$0^{\circ}C$에서 발아하지 못하고 11$^{\circ}C$에서 발아가 가능하였다. 휴면이 타파되지 않은 종자가 타파된 종자는 .$H_2O$$_2$ 1% 용액에서 24시간 침종한 후 순수한 맑은 물에 행군 다음, 종자표면에 물기가 없도록 말려서 파종할 때 99~100% 발아하였다. 종실수확 직후 순수한 맑은 물에 휴면중인 종자를 24시간 침종후 파종할 때 38% 밖에 발아되지 않았고 수종 1개월후에도 83% 밖에 발아되지 않았다. 2. 발아최저온도와 일평균기온에 의한 진주조 파종기 상측에서 발아최저온도 12$^{\circ}C$에 도달한 4월 하순~5월 하순이 파종초한기였고 안전한 파종기는 5월 중순이었다. 3. 적습토양조건에서 출아에 적합한 파종심도는 2cm이었으며 건조한 토양건조에서는 4～6cm이었다. 파종심도가 깊을수록 지중경은 길어졌으며 근관도 깊게 위치하였다. 지중경장과 근과깊이는 파종심도와 높은 정의 상관관계에 있으므로 너무 깊게 파종하면 불정근과 분벽발달이 저해됨을 알 수 있었다.