• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.780-786
• /
• 2002

Optimum condition of the drying process and the changes in aroma components during dehydration were determined for Sarcodon aspratus. The drying curve of mushrooms consisted of short constant rate period followed by long falling rate period. The drying rate increased with increasing drying temperature and air velocity. Results showed that mushrooms dried at $50^{\circ}C$ and air velocity of 1.5 m/sec had the greatest peak area of aroma compound. The aromatic components of the dried mushrooms were 1-octen-3-one, 1-octen-3-ol, 3-octanone, 1-octanol, 2-octen-1-ol, 3-octanol, 3-octanone, 1-octanol, 2-octen-1-ol, and 3-octanol. Peak areas of mushroom alcohol and aromatic compounds of mushrooms including 1-octen-3-ol, 1-octanol, 2-octen-1-ol, 3-octanol decreased significantly, whereas those of 1-octen-3-one and 3-octane increased during the drying period. New unfavorable compounds including butyric acid, propanoic acid, and 3-methyl thiopropanol were formed during the drying period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1700-1707
• /
• 2015

The effects of drying temperature on drying characteristics of soybeans with different grain sizes [6.0 (S), 7.5 (M), and 9.0 mm (L) (${\pm}0.2$)] with 25.0% (${\pm}0.8$) initial moisture content were studied. Drying temperatures varied at 25, 35, and $45^{\circ}C$, with a constant air velocity (13.2 m/s). Thin-layer drying models were applied to describe the drying process of soybeans. The Midilli-Kucuk model showed the best fit ($R^2$ >0.99). Based on the model parameters, drying time to achieve the target moisture content (10%) was successfully estimated. Drying time was strongly dependent on the size of soybeans and the drying temperature. The effective moisture diffusivity ($D_{eff}$) was estimated by the diffusion model based on Fick's second law. $D_{eff}$ values increased as grain size and drying temperature increased due to the combined effect of high temperatures and high drying rates, which promote compact tissue. Deff values of S, M, and L estimated were in the range of $0.83{\times}10^{-10}$ to $1.51{\times}10^{-10}m^2/s$, $1.17{\times}10^{-10}$ to $2.17{\times}10^{-10}m^2/s$, and $1.53{\times}10^{-10}$ to $2.95{\times}10^{-10}m^2/s$, respectively, whereas activation energy ($E_a$) based on drying temperature showed no significant differences in the size of soybeans.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.121-128
• /
• 2022

The aims of this study were to optimize the processing procedure of high-quality semi-alternating temperature dried Israeli carp Cyprinus carpio (SAD-IC) and to investigate the sensory properties of the product. Based on the differences in moisture content of the dorsal and ventral muscles, high quality SAD-IC was prepared by alternating the drying temperature between 4 h at 35℃, and 2 h at 5℃, three times before final drying for 2 h at 35℃. The surface in SAD-IC produced under the optimal alternating-temperature drying process had a markedly superior browning index value and softer texture compared to products produced using constant-temperature drying. SAD-IC produced from dorsal and ventral muscle had significantly superior taste values than the raw material. These results suggest that SAD-IC has the potential to be industrialized.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.349-354
• /
• 1983

A study on the color changes of fish meat during drying was conducted using fishes with different lipid contents, such as Alaska pollack as lean fish, conger eel as white fleshed fatty fish, and sardine as dark fleshed fatty fish. The fish meat was dried in a forced air dryer for 20 hours at 40, 55 and $70^{\circ}C$, The air velocity was 0.4 m/sec and the relative humidity of air was controlled to a constant value in the range of 10 to $50\%$. The color changes were evaluated with the brown color densities developed by lipid oxidation and Maillard reaction. The predominant reaction for the brown color developed during drying was lipid oxidation, The more the lipid content of fish and the higher the drying temperature were, the more violent the oxidative reaction of Lipid was. The rate of lipid oxidation during drying at 40 and $55^{\circ}C$ was affected by the relative humidity of air and was the slowest around $30\%$. But no remarkable influence of relative humidity on the rate of lipid oxidation could be confirmed during drying at $70^{\circ}C$. It seemed that the rate of lipid oxidation at higher temperature was more sensitive to the temperature than the relative humidity of air. Maillard reaction showed not so significant influence on the color changes of fish meat during drying. The rate of reaction was increased with increasing relative humidity of air in the range of 10 to $50\%$.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.37-42
• /
• 1999

The equilibrium moisture content(EMC) of Shiitake mushroom is and important factor because it has a close relationship to storage and drying problems. The determination of the EMC for Shiitake mushroom was made in atmospheres of various constant humidities at four different constant temperatures and the fitting of the five selected EMC models were performed with the experimental EMC data. The desorption equilibrium moisture contents for Shiitake mushroom were increased as the temperature was decreased and the relative humidity was increased. The significant difference of the equilibrium moisture content was appeared between the cap and the stipe of Shiitake mushroom. The Henderson-Thompson model was fitter than the others with the experimental data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.394-403
• /
• 1995

Various thermal treatments such as toasting, roasting, drum drying, autoclaving+drum drying, microwaving+drum drying and extrusion were attempted to investigate their effects on chemical composition (proximate composition, Klason lignin, neutral sugar, uronic acid, starch, free sugar, dietary fiber, phytic acid, etc) and functional properties (water solubility index, water absorption index, water holding capacity, oil holding capacity, bulk density, swelling, etc) of wheat bran. Thermal treatments on wheat bran increased soluble dietary fiber (SDF) content from 2.7% (raw sample) to 4.6% (toasted), 4.5% (roasted), 4.6% (drum dried), 5.2% (autoclaved), 3.7% (microwaved), 5.6% (extruded). In contrast, total dietary fiber (TDF) content remained nearly constant regardless of thermal treatments, reflecting the concomitant decrease in insoluble dietary fiber (IDF). It was also found that water holding capacity (WHC) increased $20{\sim}75%$ due to thermal treatments employed in this research. Both bulk density and swelling were not directly relevant to WHC, but thier multiplication exhibited good correlation $(R^2=0.94)$ with WHC. Scanning elctron microscopy (SEM) exhibited that structure of raw wheat bran was significantly modified, whose degree and shape well reflected the types of thermal treatments.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.62-68
• /
• 1978

Equilibrium moisture content of rough rice is an important factor because it has a close relationship to storage and drying problems. Determination of the EMC for 10 different varieties of rough rice were made in atmospheres of various constant humidities at three different constant temperatures. In addition , some physical properties were also measured for two different levels of moisture content of the samples. The results may be summarized as follows ; 1. Several physical properties of ten different varieties of rough were measured. Significant difference of the properties was appeared between the varieties in which the difference was pronounced in the dimensions of the varieties. Also, all the dimensions were increased as the moisture content of the rough rice was increased from 14 % to 16%. 2. Significant difference of the equilibrium moisture content was also appeared between some of the varieties in which the equilibrium moisture content of Josaengtongil and Minehikari was 24.26% while that of the others was in the range between 18 to 19% at the conditions of relative humidity of 84% and temperature of 47℃ , respectively. Similar pattern was also observed in other conditions. 3. The values of the constant of Henderson's equation were calculated from the data obtained but they are believed to be useful until more precise and complete data are obtained. There was a good agreement between the calculated and experimental results.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.879-884
• /
• 2009

Allium tuberosum Rotter (Liliaceae, Chinese chives) is a perennial herb of which leaves are used for food. This study investigated the effect of pretreatment on quality of dehydrated Chinese chives. Chinese chives was blanched at $80^{\circ}C$ for 20 sec, followed by drying at $70^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$, or drying at $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. Optimum drying temperature and time was $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$. These conditions were shortened time for dehydration and showed smaller decrease than others in Hunter color L, a, b. Dehydrated Chinese chives showed a constant decrease in greenness with storage, probably due to destruction of chlorophyll by light. In the measurement of Hunter color L, a, b, these conditions showed smaller decrease than others in Hunter color for 15 week storage. Chlorophyll content and SOD (superoxide dismutase)-like activity in that condition was higher than others. It was assumed that a phenolic compound that forms its thermostable activity. The fitness of drying models was conducted in order to explain reducing chlorophyll loss and SOD (superoxide dismutase)-like activity loss. Based upon the chlorophyll content, SOD-like activity, and retention of green color of the vegetable, optimum drying conditions was $100^{\circ}C$ for 30 min followed by $100^{\circ}C$ for 30 min and subsequent drying at $70^{\circ}C$, or $100^{\circ}C$ for 60 min and subsequent drying at $70^{\circ}C$.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.120-127
• /
• 2009

An electric furnace, inside which desired temperatures are kept constant by generating heat, is known to be a difficult system to control and model exactly because system parameters and response delay time vary as the temperature and position are changed. In this study the heating system of ceramic drying furnaces with time-varying parameters is mathematically modeled as a second order system and control parameters are estimated by using a RIV (Recursive Instrumental-Variable) method. A modified bang-bang control with magnitude tuning is proposed in the time optimal temperature control of ceramic drying electric furnaces and its performance is experimentally verified. It is proven that temperature tracking of adaptive time optimal control using a second order model is more stable than the GPCEW (Generalized Predictive Control with Exponential Weight) and rapidly settles down by pre-estimation of the system parameters.