• 한국식품저장유통학회지
• /
• 제6권1호
• /
• pp.87-91
• /
• 1999

In an attempt to test experimental condition of preparing grape powder, grapes having less commercial value was used and tried. With drying method, spray and freeze drying were satisfactory to produce power. Moisture content and odor retention were better by the latter method. Three grape strains stored for 40 days contained more odors than those stored for 5 days. Maltose 90% plus dextrin 10% was suitable for drying support. To increase odror sense, citric acid and vitamin C can be added up to 0.1 and 0.2%, respectively. Considering these conditions, grape complex powder prapared from grape powder 20% comprising drying support, glucose 79.7%, citric acid 0.1%, vitamin C 0.2% with freeze drying was the best by overall evaluation including sensory test. When campbell and neomuscut were mixed by 15:5 or 10:10, sensory evaluation was also ameliorated.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.95-105
• /
• 2007

A mathematical modeling for the drying process of hygroscopic porous media, such as wood, has been developed in the past decades. The governing equations for wood drying consist of three conservation equations with respect to the three state variables, moisture content, temperature and air density. They are involving simultaneous, highly coupled heat and mass transfer phenomena. In recent, the equations were extended to account for material heterogeneity through the density of the wood and via the density variation of the material process, capillary pressure, absolute permeability, bound water diffusivity and effective thermal conductivity. In this paper, we investigate the drying behavior for the three primary variables of the drying process in terms of control volume finite element method to the heterogeneous transport model on one-dimensional grid.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.453-459
• /
• 1996

This study was carried out to determine the changes in quality during the drying process and the optimum drying condition for utilizing soybean curd residue. The quality criteria for soybean curd residue were acid value, peroxide value, fatty acid composition and microbial concentration. The acid values of soybean curd residue were 7.5, 4.5 and 5.9 KOH mg/g upon 12 hour drying with open-air sun, ambient-air blast and warm-air blast, respectively. The numbers of total aerobic bacteria and molds increased remarkably during drying with open-air sunlight, ambient-air blast and warm-air blast except for hot air blast. Among different drying methods, the hot air blast drying(1kg of sample) was the most effective methods, which completed in three hours. Also, the drying method demonstrated a typical drying curve ; settling down, constant rate drying and falling rate drying period were shown within one hour, from one and three hours and after three hours, respectively. Moreover, there was significant variation in the constant drying period for the quality of soybean curd residue.

• 한국식품영양학회지
• /
• 제34권2호
• /
• pp.165-173
• /
• 2021

Centella asiatica (CA) has been used as a nutritional plant as well as a traditional herbal medicine around the world. This study, quality component (proximate composition, total polyphenol, and triterpenoid compound), and antioxidant and anti-inflammatory activities of CA dried using various methods were investigated. Proximate compositions of CA with different drying methods included a large amount of carbohydrates, crude protein, crude ash, and crude fiber. Among the drying methods, cold drying provided the highest total polyphenol content and antioxidant activity, while hot-air drying at 75℃ provided the lowest total polyphenol content and antioxidant activity. In addition, when the major triterpenoid compounds of CA were analyzed, the highest content of asiaticoside of triterpenoid glycoside was obtained with all drying methods. With respect to the total triterpenoid, the highest content was obtained with cold drying (68.8 mg/g) whereas natural drying (31.4 mg/g) provided the lowest content. In anti-inflammatory activity of LPS-stimulated RAW 264.7 cells, EtOH extract of cold drying showed a significantly higher inhibitory activity in comparison to the other drying methods. In conclusion, it is considered that the cold drying method is suitable for industrial preparation of functional materials with high physiological ingredients, and antioxidant and anti-inflammatory activities from CA.

• 한국농촌건축학회논문집
• /
• 제21권1호
• /
• pp.37-44
• /
• 2019

Recently, various tourist products using hanok have increased rapidly. In the meantime, there is a steady demand for Hanok architecture. However, there are many negative perceptions about wood deformation and biodeterioration. Wood deformation and biodeterioration are related to moisture content. And the cracks occur in the process of removing water from the wood. Therefore, this study investigates the moisture content and cracks of dried hanok made of wood according to the drying method of wood. Drying methods include natural seasoning and artificial seasoning. There was a difference in moisture removal depending on drying period and method of natural seasoning. Drying time should be about 3 years for natural seasoning, so the moisture content of the wood is stable. In addition, the moisture absorption rate was low even in a humid environment where the voids were removed. However, natural seasoning is time consuming. Artificial seasoning, on the other hand, can quickly remove moisture from the wood and reduce porosity, but it is costly. Cracks that occur during the drying of wood may become problematic in appearance and stability due to wider spacing over time. As a result, the difference in the moisture content of the timber depending on the drying method and drying period of the wood was maintained even after the formation. These gaps appeared to be differences in moisture absorption in a wet environment.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.145-150
• /
• 2009

In this study, characteristics of microwave and convective drying are studied by using a multiphase porous media model. Temperature and moisture profiles for hot-air convective heating and microwave heating of 1-D porous media with varying time and space are numerically investigated. This result shows the microwave drying method is more effective than the convective drying method. Comparing to convective drying, microwave drying can increase temperature and evaporation rate significantly since microwave generates internal heat and increases internal pressure, which results in moisture movement toward the surface on which moisture is vaporized.

• 한국식생활문화학회지
• /
• 제18권5호
• /
• pp.437-442
• /
• 2003

This study was conducted to confirm the effect of drying method on quality of popped rice for making salyeotgangjung(popped rice lump with malt syrup) in process of drying gelatinized rice. The drying were performed at dry oven or convection oven, at $30^{\circ}C,\;50^{\circ}C\;and\;105^{\circ}C$, respectively. There were not significant differences in the hardness of popped rice among the drying methods. The dry at $30^{\circ}C$ constant in dry oven showed higher popping rate, good external surface, uniformed and well developed internal cell size. The dry at $30^{\circ}C$ in convection oven and $50^{\circ}C$ constant temperature in dry oven showed low expansion and poor external surface, respectively. In conclusion, the drying at $30^{\circ}C$ in non-convection oven had the highest quality of popped rice for salyeotgangjung.

• Applied Microscopy
• /
• 제25권3호
• /
• pp.33-39
• /
• 1995

To compare the quality of ultrastructural preservation of Scanning Electron Microscopic specimens dried with different methods; pure air-drying, air-drying with using Tetramethylsilane(TMS), four kind of air-drying using Hexamethyldisilazane(HMDS) and critical point drying(CPD), we conducted scanning electron microscopic observation on liver, skeletal muscle and intestinal tissues from laboratory rat treated with each method. In pure air drying group, severe distortion of tissue surface was observed, and in HMDS treated group, only liver tissue showed slight distortion. But in TMS treated group, each tissue showed a good presentation comparable to CPD group. The results suggest that the method of air-drying using TMS may be the former is less expensive and simple be and also time-saving.

• 플랜트 저널
• /
• 제5권4호
• /
• pp.73-79
• /
• 2009

Increase of consumption in limited coal reserves leads prices surging. As a result, iron works which produce products with coal are in difficulties. Accordingly, it is required a lot of research of using non-caking coal that is relatively low cost and has abundant reserves. Direct drying and indirect drying are two major methods of drying the coal. Recently, to minimize the needed calories and to save energy, using fluidbed or fluidizing method is a recent main trend of minimizing the size of the facility and maximizing energy efficiency. However there is also disadvantage such as increasing facility investment because of installing additional facilities in the latter part. In this study, we will have theoretical researches on the indirect drying method with heat exchange system which have been traditionally used. As a result it is expected to increase the efficiency of the facility operation.