• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.529-542
• /
• 2019

Nowadays, drying methods for municipal solid waste quality improvement have been adopted in the developed and developing countries to valorize wastes for a renewable energy source, reduce dependency on fossil fuel and keep safer disposal at landfills. Among them, biodrying, biostabilization, thermal drying and solar drying are the most common. Drying of municipal solid waste could offer several environmental and economic benefits. Therefore, this review highlighted the drying methods for municipal solid waste quality improvement around the world and compared them based on the reduction of moisture, weight and volume of municipal solid wastes against drying temperature and time by using statistical analysis. It was observed that the drying temperature of different drying methods accounted for 115 ± 40℃ for thermal drying, 59 ± 37℃ for solar drying, 55 ± 15℃ for biodrying and 58 ± 11℃ for biostabilization. Among the drying methods, thermal drying provided the shortest drying time. The moisture reduction, weight reduction, volume reduction and heating value increase of municipal solid waste could vary with drying temperature and time. Finally, the benefits and drawbacks of different drying methods were specified, and recommendations were made for the future efficient drying.

• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.72-83
• /
• 1996

This study was performed to find out drying characteristics and develop drying model for the design of an efficient dryer or drying system of garlic. The basic model which describes drying phenomenon of garlic was first established. A series of drying test were conducted with two varieties of garlic(Uiseong, Namdo) at 9-different drying conditions (drying temperatures ; $40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$, relative humidities ; 20%, 35%, 50%) and statistical analysis was made to fit the data with exponential equation, approximated diffusion equation, page equation, thompson equation and wang equation, respectively. In this test, the effects of drying air temperature and relative humidity on the drying rate were undertaken. Finally, new drying model based on these experimental results was developed to describe the drying characteristics of garlic. Also, the volatile components of garlic extracts were investigated. For experiment both Uisoeng and Namdo garlic were dried by heated-air-drying, followed by ether extraction. The extracts were analysed by Gas chromatography/Mass spectrometer.

• 생물환경조절학회지
• /
• 제27권4호
• /
• pp.356-362
• /
• 2018

고추는 조미채소의 한 종류로 우리나라 채소시장에서 큰 비중을 차지하는 품목이다. 대부분 고추의 이용은 건고추의 분말형태인 고춧가루로 가공하여 이용되고 있으므로, 고추건조에 대한 품질과 생산성 향상이 중요한 부분이다. 따라서 본 연구에서는 고추의 건조방법에 따라 고춧가루의 품질을 좌우할 수 있는 성분의 변화에 대하여 비교하고, 생산비를 고려하여 적정 건조방법을 제시하고자 실험을 수행하였다. 건조방법으로는 관행으로 많이 이용되는 양건과 화건을 이용하였으며, 제습기를 이용한 제습건조방식을 추가 적용하여 건고추 생산성과 품질을 비교하였다. 고추의 건조방식에 따른 건조율은 화건이 85.1%로 제일 높았고, 이에 따라 고춧가루의 수분함량도 13.5%로 가장 낮게 나타났다. 고추의 색택을 좌우하는 ASTA(American Spice Trade Association) 색도는 양건처리에 비해 화건과 제습건조처리가 높은 결과를 보였다. 고춧가루의 신미성분인 capsaicinoid 함량은 양건처리에 비하여 화건과 제습건조처리에서 모두 낮게 나타나 이에 대한 추가적인 적정 건조조건에 대한 연구가 추가되어야 된다. 당함량은 건조시간이 비교적 짧았던 화건과 제습건조처리에서 양건에 비해 높게 나타났으나 두 처리간에는 유의한 차이를 보이지 않았다. 건고추 생산비용은 제습건조처리가 화건처리에 비해 9.9% 효율이 높은 것으로 나타났다. 본 연구를 통해 화건과 제습건조가 당함량의 증진과 건고추의 색 발현 측면에서는 효과적 이었음을 알 수 있었다. 고추의 신미성분인 capsaicinoid 함량 증진을 위해서는 화건과 제습건조처리에서 적정한 건조온도와 건조시간에 대한 연구가 추가되어야 될 것으로 판단되었다.

• 한국약용작물학회지
• /
• 제14권1호
• /
• pp.8-13
• /
• 2006

삼백초의 유효성분과 선도유지에 적합한 건조방법을 구명하고자 건조방법을 달리하여 건조시킨 후 건조방법별 유효성분 함량과 선도를 조사한 결과를 요약하면 다음과 같다. 1. 건조방법별 건조시간은 양건에 비해 열풍건조와 동결건조시 $88{\sim}93%$ 단축되었다. 건물수율은 동결건조 > 양건 > 열풍건조 순으로 높았고, 건조후 수분 함량은 양건 > 열풍건조 > 동결건조 순으로 높았다. 2. 총페놀성 화합물과 quercetin 관련물질 함량은 동결건조 > 열풍건조 > 양건 순으로 높았으며, 열풍건조후 볶음 또는 건조전 증자 처리를 함으로써 감소되었다. 항산화 활성은 동결건조에서 가장 높았고, 열풍건조와 양건 간에는 차이가 없었으며, 열풍건조후 볶음 또는 건조전 증자 처리를 함으로써 증가하여 총페놀성 화합물과 quercetin 관련물질 함량과는 다른 경향을 보였다. 3. 적색도 (a)는 동결건조 < 열풍건조 < 양건 순으로 낮았다. 4. 열풍건조시 부위별 총페놀성화합물과 quercetin 관련물질 함량은 꽃 > 잎 > 세절 > 줄기 순으로 높았으며, 항산화 활성도 유사한 결과를 나타내었다. 부위별 적색도는 잎 < 세절 < 꽃 < 줄기 순으로 낮았다. 5. 삼백초의 유효성분과 선도유지에 적합한 건조방법은 세절하여 동결건조하거나 잎과 꽃만을 열풍건조하는 것이 효과적이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.66-71
• /
• 1994

To increase drying rate and reduce drying degradation, pretreatments such as prefreezing and presteaming have been widely used in wood industries. Presteaming lumbers prior to kiln drying is known positively to improve its permeability, to increase diffusion coefficient and to reduce discoloration, but negatively to increase collapse. Prefreezing lumbers prior to kiln drying is also known to reduce significantly its drying defects and its shrinkages. Thus it is no doubt that the pretreated lumbers shrink diversely from the untreated. In this study the shrinkage behaviors of the pretreated specimens are investigated by drying two tropical hardwoods (Apitong and Taun) in three different dying conditions: high temperature and slow drying rate (drying in a closed cylinder), high temperature and rapid drying rate (drying in an oven) and low temperature and slow drying rate(drying at room temperature). The prefrozen specimens show the least volumetric shrinkages in most drying conditions. The specimens dried in cylinders shrink most among all drying conditions. In general the pretreated specimens reached the 30 % moisture content faster than the untreated by about 30 %.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.453-459
• /
• 1996

This study was carried out to determine the changes in quality during the drying process and the optimum drying condition for utilizing soybean curd residue. The quality criteria for soybean curd residue were acid value, peroxide value, fatty acid composition and microbial concentration. The acid values of soybean curd residue were 7.5, 4.5 and 5.9 KOH mg/g upon 12 hour drying with open-air sun, ambient-air blast and warm-air blast, respectively. The numbers of total aerobic bacteria and molds increased remarkably during drying with open-air sunlight, ambient-air blast and warm-air blast except for hot air blast. Among different drying methods, the hot air blast drying(1kg of sample) was the most effective methods, which completed in three hours. Also, the drying method demonstrated a typical drying curve ; settling down, constant rate drying and falling rate drying period were shown within one hour, from one and three hours and after three hours, respectively. Moreover, there was significant variation in the constant drying period for the quality of soybean curd residue.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.45-50
• /
• 2002

This study was performed to develop thin layer drying equations fur short grain rough rice using far-infrared ray. Thin layer drying tests was conducted at four far-infrared ray temperature levels of 30, 40, 50, 60$^{\circ}C$ and two initial moisture content levels of 20.7, 26.2%(w.b.). The measured moisture ratios were fitted to Lewis and Page drying models by stepwise multiple regression analysis. Half response time of drying was affected by both drying temperature and initial moisture content at drying temperature of below 40$^{\circ}C$, but at above 40$^{\circ}C$ was mainly affected by drying temperature. Experimental constant(k) in Lewis model was a function of drying temperature, but K and N in Page model were function of drying temperature and initial moisture content. Moisture ratios predicted by two drying models agreed well with experimental values. But in the actual range of drying temperature above 30$^{\circ}C$ Page model was more suitable for predicting of drying rates.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.51-60
• /
• 1997

We investigated the characteristics of air-and vacuum-drying heated by hot plates for 8~14cm-diameter logs or 6~12cm-thick pillars of Pinus koraiensis. And we evaluated the effects of longitudinal kerf and vacuum drying heated by hot plates. The vacuum drying times from green to 10.9~18.6% MC were 15 days, and these times were one-fifth compared to the air-drying times. The longitudinal kerfing had no significant, effect on drying rates during both air-drying and vacuum drying. But drying defects such as surface checks and V-shaped cracks were effectively prevented during air-drying and vacuum drying by longitudinal kerfing. The vacuum drying was more advantageous than air-drying for preventing of surface checks, end checks and V-shaped cracks, and especially, the vacuum dried pillars with longitudinal kerf were almost free from drying defects. In accelerated weathering conditions the resin did not exude for all specimens.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.22-54
• /
• 1989

Seasonal semi-greenhouse type solar-drying of 2.5cm-and 5.0cm-thick lumber of Quercus aliena Blume and Quercus variailis Blume was carried out to investigate the possibility of solar-drying of wood and to decide the active solar-drying period in Korea. In the active solar-drying period obtained solar-dehumidification, semi-greenhouse type solar-, air- and kiln-drying of 2.5cm -thick lumber of oaks were carried out to analyze drying-rates. -defects, and -yield in each drying-method and to calculate daily total absorbed solar-radiation the solar dryers. The energy balance equations were set up, considering all the energy requirements, to analyze the heat efficiencies of semi-greenhouse type solar and solar-dehumidification-dryer. In a seasonal drying the drying rate of semi-greenhouse type solar-dryer was highest in summer, and greater in fall, spring, and winter in order. Solar-drying time was 45% in summer to 50% in winter of the air-drying rime, and more serious drying-defects occurred in air-drying than in solar-drying. In the active solar-drying period. April, May, and June, the average drying rate in solar-dehumidification-drying was 1.0%/day and greater than 0.8%/day in semi-greenhouse type solar-drying. In solar-dehumidification-drying the time required to dry lumber to 10% moisture content was less than 60 days, and solar-dehumidification-drying showed the highest drying-yield, 65.01%, than the other drying methods. The daily total absorbed solar radiations were 8.51MJ on the roof collector and 6.22 MJ on the south wall collector. In the energy blance 69.48% of total energy input was lost by heat conduction through walls, roof. and floor 11.68% by heat leakage, 0.33% by heating the internal structures of the solar-dryer and 5.38% by air-venting. Therefore the heat efficiency of semi-greenhouse type solar-dryer 13.13%, was lower than that of solar-dehumidification-dryer, 14.04%. Solar-drying of lumber in Korea showed the possibility to reduce the air-drying-time in every season and the efficiency of solar-dehumidification drying was higher than that of semi-greenhouse type solar-drying.