• 제목/요약/키워드: Dry-heat cured

검색결과 7건 처리시간 0.02초

유도광선변화에 따른 건식중합과 마이크로파중합 아크릴레진의 물리적 성질영향 (Physical Properties Effect of Dry-Heat and Microwave-Cured Acrylic Resins depending on the Irradiation-Induced Changes)

  • 김규리
    • 한국산학기술학회논문지
    • /
    • 제16권7호
    • /
    • pp.4388-4397
    • /
    • 2015
  • 이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.

양생조건에 따른 경화제 무첨가 에폭시수지 혼입 PMM의 경화특성 (Hardening Properties of Hardener-Free Epoxy-Modified Mortars by Curing Conditions)

  • 이재화;김주영;김완기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 추계 학술논문 발표대회
    • /
    • pp.255-257
    • /
    • 2012
  • Epoxy resin without any hardener can harden in the presence of hydroxide ions in cement mortars and concretes at ambient temperature. The purpose of present study is to examine the hardening properties of hardener-free epoxy-modified mortars by curing conditions. The hardener-free epoxy-modified mortars using diglycidyl ether of A epoxy resin are prepared with various polymer-cement ratios, and subjected to initial moist/dry curing, initial steam(90℃) curing, initial steam/heat(80℃, 100℃) curing.As a result, degree of hardening of epoxy resin in initial moist/dry cured, initial steam cured and initial steam/heat(80℃) cured hardener-free epoxy-modified mortars is decreased with increasing polymer-cement ratio. However, it is markedly improved with additional dry-curing periods. On the other hand, regardless of the polymer-cement ratio and dry curing periods, degree of hardening of hardener-free epoxy-modified mortars with initial steam/heat(100℃) cure is over 95%.

  • PDF

각종 양생조건에 따른 비스페놀 A형 에폭시수지 혼입 모르타르의 강도성상 (Strength Properties of Bisphenol A-Type Epoxy-Modified Mortars under Various Curing Conditions)

  • 김완기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.55-59
    • /
    • 2009
  • The epoxy resin without hardener can harden by a ring-opening reaction in the presence of the alkalies produced by the hydration of cement in epoxy-modified mortars and concretes. This paper investigates the effect of curing conditions on the strength improvement of polymer-modified mortars using bisphenol A-type epoxy resin without hardener. The polymer-modified mortars using epoxy resin are prepared with various polymer-cement ratios, and subjected to ideal, water, dry and heat cures. In the heat cure, the epoxy-modified mortars are sealed or unsealed with a PVDC (polyvinylidene chloride) film. The epoxy-modified mortars are tested for flexural and compressive strengths at desired curing methods. The microstructures of the epoxy-modified mortars are also observed by scanning electron microscope. The effects of curing conditions on the strength development of the epoxy-modified mortars are examined. From the test results, the marked effectiveness of the heat cure under the PVDC film sealing against the development of the strength of the epoxy-modified mortar without the hardener is recognized. The flexural and compressive strengths of 7-day-90℃ heat-cured, PVDC film-sealed epoxy-modified mortars without hardener reach 7 to 17MPa and 24 to 44MPa respectively, and are two to three times of Unmodified mortar. Such high strength development of the epoxy-modified mortars may be achieved by the dense microstructure formation by cement hydrates and the hardening of the epoxy resin in the mortars.

  • PDF

Effect of light-curing, pressure, oxygen inhibition, and heat on shear bond strength between bis-acryl provisional restoration and bis-acryl repair materials

  • Shim, Ji-Suk;Lee, Jeong-Yol;Choi, Yeon-Jo;Shin, Sang-Wan;Ryu, Jae-Jun
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권1호
    • /
    • pp.47-50
    • /
    • 2015
  • PURPOSE. This study aimed to discover a way to increase the bond strength between bis-acryl resins, using a comparison of the shear bond strengths attained from bis-acryl resins treated with light curing, pressure, oxygen inhibition, and heat. MATERIALS AND METHODS. Self-cured bis-acryl resin was used as both a base material and as a repair material. Seventy specimens were distributed into seven groups according to treatment methods: pressure - stored in a pressure cooker at 0.2 Mpa; oxygen inhibition- applied an oxygen inhibitor around the repaired material,; heat treatment - performed heat treatment in a dry oven at $60^{\circ}C$, $100^{\circ}C$, or $140^{\circ}C$. The shear bond strength was measured with a universal testing machine, and the shear bond strength (MPa) was calculated from the peak load of failure. A comparison of the bond strength between the repaired specimens was conducted using one-way ANOVA and Tukey multiple comparison tests (${\alpha}$=.05). RESULTS. There were no statistically significant differences in the shear bond strength between the control group and the light curing, pressure, and oxygen inhibition groups. However, the heat treatment groups showed statistically higher bond strengths than the groups treated without heat, and the groups treated at a higher temperature resulted in higher bond strengths. Statistically significant differences were seen between groups after different degrees of heat treatment, except in groups heated at $100^{\circ}C$ and $140^{\circ}C$. CONCLUSION. Strong bonding can be achieved between a bis-acryl base and bis-acryl repair material after heat treatment.

양식미역의 이용가공에 관한 연구 1. 열처리방법에 따른 염장미역의 보장효과 (STUDY ON PROCESSING AND UTILIZATION OF CULTURED UNDARIA PINNETIFIDA 1. Effect of Heat Treatment on the Storage Life of Dry Salted Undaria pinnatifida)

  • 강성구;김우준;강태중
    • 한국수산과학회지
    • /
    • 제9권1호
    • /
    • pp.19-24
    • /
    • 1976
  • 영장미역의 보장효과를 검토하기 위하여 생육장소, 생육시기별 성분을 조사하고 가열처리시간, 온도 및 처리액의 농도 차이가 보장효과에 미치는 영향을 검토한 결과는 다음과 같다. 1. 미역의 가공처리 적기는 포항, 여수지방은 12월 하순, 완도지방은 1월하순이었다. 2. 온도별 가열처리 효과는 $90^{\circ}C$$100^{\circ}C$에서 유기산, 휘발산의 증가가 비교적 적었고 색소이 감소도 적었다. 3. 농도별 가열처리 효과는, 해수와 포화식염수의 경우는 전성분 모두 저장중 큰 변화가 없었고 효과가 좋았으나 담수에서는 유기산, 휘발산이 현저하게 증가하였다. 4. 가열처리 시간별 효과는 성분변화에 큰 차이가 없었으나 20초간 처리한 것은 carotenoid의 감소가 현저 하였다. 염장 미역의 가열처리는 $90^{\circ}C$$100^{\circ}C$ 해수 중에서 40초간 처리하는 것이 좋았다. 본 연구는 1975학년도 문화부 학술연구 조성비로 이루어졌음.

  • PDF

자음항화탕의 형상의학적 고찰 (Review on the Jaeumkangwha-tang in Hyungsang Medicine)

  • 정흥식;강경화;이용태
    • 동의생리병리학회지
    • /
    • 제18권4호
    • /
    • pp.982-989
    • /
    • 2004
  • The following is the conclusion drawn from a review on the clinical cases cured by Jaeumkangwha-tang in perspective of Hyungsang medicine. Jaeumkangwha-tang originated from the modified Jibaiksamul-tang in 'Manbyunghuichun(萬病回春)' and applied to the diseases induced by flaming fire due to deficiency of Yin. In 'Donguibogam', there are two kinds of Jaeumkangwha-tang. One in the chapter of kidney is mainly prescribed to replenish the Jung of kidney and applicable to the cases with configuration and symptom of kidney along with fire. The other one in the chapter of fire is applied to the symptoms of flaming fire due to deficiency of Yin. The characteristics of the patients treated by Jaeumkangwha-tang from the viewpoint of Hyungsang medicine can be classified as follows : ① configuration: Dam type, Shin type, inverted triangular type(:天垂象), bird type, round eyes, thin lips, slender waist, thin leg, pretty face, sparkling eyes, prominent upper lip and upward eyes and nose. ② color : dark red complexion, red cheek bone, red lips and red glabella. ③ pulse : fine and fast pulse and pulsation on the Chuk(尺) in man and so forth. ④ symptoms: agility, talkativeness, pimpled face, crooked back, weakness to the heat of summer, light eating, timidity, blood-shot eyes, night sweat, cough, abundant phlegm, hemoptysis, bloody spittle, enervation, emaciation, back pain, flaccidity of lower limbs, involuntary emission, nocturnal emission, heat sensation in the chest palms and soles, anger, flush on cheek bone, red lips and dry mouth, reddish tongue, stiff excrement, scanty yellow urine, etc.

배합 및 양생조건이 3성분계 포졸란재를 이용한 RPC의 강도발현 특성에 미치는 영향 (Influence of Mixtures and Curing Conditions on Strength and Microstructure of Reactive Powder Concrete Using Ternary Pozzolanic Materials)

  • 장칩도르지;최승훈;소형석;서기석;소승영
    • 콘크리트학회논문집
    • /
    • 제25권4호
    • /
    • pp.457-465
    • /
    • 2013
  • 반응성 분체 콘크리트(RPC)는 월등히 뛰어난 기계적 성능을 바탕으로 최근의 건설 환경 변화에 적절히 대응할 수 있는 차세대 건설재료로서 기대를 모으고 있지만, 이에 대한 국내에서의 연구는 매우 부족한 실정이다. 특히 유럽에서 개발된 RPC는 단위시멘트량이 매우 높거나 반응성 분체로서 국내에서는 전량 수입에 의존하고 있는 고가의 실리카퓸(silica fume)을 다량 사용하고 있다. 때문에 국내 실정에 맞는 실용적인 RPC의 개발에 관한 다양한 연구가 필요하다. 이 연구에서는 기존 RPC의 성능 범위 내에서 단위시멘트량의 감소와 실리카퓸의 대체재로서 고로슬래그분말이나 플라이애쉬의 사용 등을 검토하기 위하여 다양한 양생방법에 따른 3성분계 포졸란재(고로슬래그, 플라이애쉬, 실리카퓸) 혼입 RPC의 강도발현 및 미세구조 특성을 분석 평가하였다. 시험 결과는 3성분계 포졸란재의 적절한 혼합사용과 최적 양생방법의 적용이 RPC의 강도발현 및 미세구조 개선에 매우 효과적임을 잘 보여주었다.