Journal of the Korea Society of Computer and Information
/
v.25
no.8
/
pp.129-135
/
2020
This study is to identify the awareness and performance of hand washing according to the presence of clinical practice experience of paramedic students and provide basic data of education on hand washing that can be practically applied. 335 students in paramedicine department in P city and J city were the study subjects and we distributed URL to those who agreed to participate in the study to carry out untact survey using questionnaire. The study results were analyzed by using SPSS/WIN 23.0. The results showed that the average number of hand washing per day was 5~8 times (142 students, 42.4%) and average time for washing hands was 24.34 seconds. We could find statistically significant differences in 'hand washing to wrist' and 'it is necessary to completely dry after hand washing' in terms of difference on awareness of hand washing according to the clinical experiences (p<0.05). In terms of differences in hand washing performance according to clinical practice experience, statistically significant difference was found in 'before touching equipment for clinical practice' and 'before taking foods such as drinks during practice' (p<0.05). The correlation between awareness and performance of hand washing showed that if awareness of hand washing is high, its performance is increased, too (p=0.001). We try to provide basic data of education on hand washing that can improve awareness and performance on hand washing based on the results of this study.
Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.8
/
pp.3916-3924
/
2013
The purpose of this study is to provide the students with the proper hand washing knowledge after examining their attitude and performance of health science college students. Data were collected from 425 students at the college in G metropolitan city by using a questionnaire. Data were analyzed into descriptive statistics, ANOVA and pearson correlation coefficient with SPSS/WIN18.0. The average frequency and the average time of hand washing were 8.7 times a day and 18.5 sec respectively. The average frequency of hand washing education was 2.4 times. Soap bar was most frequently used as a hands detergent and paper towel as a dry method.. The Frequency and the time(sec) of hand washing increased significantly in the following provisions: above 6 times hand washing education, practical education, decontaminating agent soap, and use of paper towel. Knowledge, attitude and performance on hand washing increased significantly in the following variable : women, practice at upper grade general hospital, above 11 times hand washing a day, above 16secs hand washing, above 6 times hand washing education, practical education, decontaminating agent soap, and use of paper towel. Finally, there was significantly difference among the knowledge, attitude, and performance of hand washing. The result of this study indicates a necessity for developing education programs consistently to improve knowledge, attitude, and performance of hand washing.
In this study, a series of batch-scale tests were conducted to optimize the design parameters for the application of soil washing techniques to the hydrophobic organic compounds(HOCs)-contaminated soil and to find the effective methods for the recovery of surfactants from washing effluent by using solvent. Several nonionic surfactants (polyoxyethylene oleyl ester) and sophorolipid were applied to the artificially contaminated soil (4,000 mg n-dodecane/kg dry soil). The effects of washing time, concentration of surfactant solution, dilution ratio, and temperature on washing efficiencies were examined. Hydrophile-liphophile balance (HLB) number was proven to be one of the important parameters for soil washing. The HLB numbers of OA-5 and sophorolipid are too low to form a stable soil-water emulsion. They showed very low washing efficiencies less than 10e1o. If HLB number is in the proper range to form a stable soil-water emulsion, surfactant having higher solubility for HOCs shows higher washing efficiency. OA-14 having higher HLB number than OA-9 formed more stable soil-water emulsion. But its washing efficiency was about 20% due to a lower molar solubility ratio (MSR) than OA-9. OA-9, which forms a stable soil-water emulsion and has comparatively high sotubility for HOCs, showed about 60% washing efficiency by itself. To recover anthracene effectively from OA-9 washing effluent by using benzene as an organic solvent, desirable temperature and pH were $30^{\circ}C$ and 2, respectively.
Proceedings of the Korean Society of Machine Tool Engineers Conference
/
2003.10a
/
pp.19-24
/
2003
Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.
Traditionally mungbean(Vigna radiata L.) sprouts has been eaten soon after washing. The study was carried out to measure the effect of washing before packaging on morphological characters and color of mungbean sprouts. The seeds of cv. Zhong Lu 1 were soaked in 50 ppm BA solution immediately before 4 hour aeration and then cultured for 6 days. The sprouts were washed immediately before packaged with PE envelops or not, and then stored 5 days at $8^{\circ}C$. Their morphological characters, fresh and dry weights, and colors were measured everyday. Compared to washed, nonwashed sprouts had more lateral roots although the two sprouts did nearly same in hypocotyl and root lengths, hypocotyl diameter, fresh and dry weights. Non-washed sprouts, moreover, showed higher brightness in hypocotyl and root and cutting resistance in hypocotyl although there were not significant differences in color a and b, meaning that the latter ones were more rapidly changed during their storage. In non-washed sprouts, number of lateral roots, hypocotyl length and diameter, total fresh and dry weights were nearly same up to 3 days and afterward were declined. Brightness and color b of hypocotyl were decreased with increased storage period although cutting resistance of hypocotyl was since 3 days after storage.
Transactions of the Korean Society of Machine Tool Engineers
/
v.14
no.1
/
pp.8-14
/
2005
The purposes of using cutting fluid during cutting have been cooling, lubricating, chip washing, and anti-corroding. However, the present manufacturing industry restricts the use of cutting fluid because cutting fluid contains poisonous substances which are harmful to the human body. Therefore dry cutting becomes an unavoidable assignment and a lot of researches have studied cutting methods without using cutting fluid. Because dry turning is a continuous work, tools life is reduced by continuous heat generation and surface gets rough due to reduced lubrication, so it is important to consider these situations. In this paper, the way of selecting the optimal machining condition by the minimum number of experiments and the effectiveness of using compressed air in high hardness materials through Taguchi method have been found. Dry cutting using compressed air showed better cutting characteristics than normal dry cutting with respect to by cutting force, tool wear, and surface roughness. Also, the optimal machining condition f3r dry cutting using compressed air could be selected through Taguchi method.
Purpose: The purpose of this study was to analyze effects of hand drying methods after hand-washing. Hand drying methods consisted of spontaneous evaporation, paper towel, hand dryer with rubbing, and hand dryer without rubbing. Methods: The research design was a crossover design. The subjects were eighteen university students and randomly assigned in four group. Each group had the schedule of treatment. The schedule tested one drying method per a day and proceeded for 4 days. The data collection was performed from July 27 to July 30, 2010. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Wilcoxon test. Results: There was significant difference between the after CFU between natural dry, paper towel, air dryer with hand rubbing, and air dryer without hand rubbing(p=.006). The after CFUs of paper towel, natural dry and air dryer without hand rubbing groups were statistically less than air dryer with hand rubbing group. Conclusion: It was shown that the paper towel, spontaneous evaporation and without rubbing hand dryer are effective hand drying interventions on reducing CFU on hand. However additional researches with large sample and strict methodology are needed.
To investigate the cognition of labeling system and its problems, problems in laundry, and consumer's dissatisfaction and to decrease problems in management of clothing products, total 476 subjects were surveyed in Taejon. The major results were as follows ; 1. The cognition of labeling system was understood by 93.1% of respondents, and 72.9% of them prefer to recognized labeling by figures and letters than by either of them. Most of respondents got the knowledge of labeling system from school. The most frequently experienced mislabeling was the label for management. 2. In cleaning, 60.4% of respondents made their decisions of the laundry method after seeing labeling system. When the label recommanded either of hand washing or dry cleaning, they usually laundered with hand washing after a few times of dry cleaning. The first consideration factor for laundry was fiber composition of textiles. 3. About 70% of respondents understood ironing, laundry, and drying mark on labeling system, and 53.8% understood fiber composition and bleaching. 4. More than 90% of respondents experienced dissatisfaction in handling clothing products. The reason of dissatisfaction was deformation and decoloring after laundry. Most of respondents experienced change of tactile sensation, too.
Journal of the Korea Fashion and Costume Design Association
/
v.5
no.3
/
pp.7-14
/
2003
Fabrics dyed with artemisia extract have quite natural and elegant tones of color. This study purposed to find the best one for dyeing among artemisia collected in the four seasons in order to develop a more efficient method of dyeing with artemisia. As for the method of research, the researcher dyed wool fabric and silk fabric with artemisia, and measured dyeability according to the number of repeats of dyeing, coloration by post-mordant, color fastness to washing, color fastness to dry cleaning and color fastness to light. The results are as follows. 1. In dyeing with artemisia, dyeability was improved as the number of repeat of dying increased, and it was higher in wool fabric than in silk fabric. 2. Among artemisia collected in the four seasons, autumn artemisia had dyeability much inferior to that of artemisia from the other seasons, and winter artemisia had the best dyeability. 3. According to the result of treating fabric with post-mordant, the dyeability was improved significantly, and coloration was most remarkable when copper and iron mordant were used. 4. The color fastness to washing and color fastness to dry cleaning of fabric mordanted with artemisia were as high as grade 4-5 and grade 5 respectively. The color fastness to light was highest in winter artemisia as grade 4.
Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.