• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.1043-1055
• /
• 2023

This study was conducted to suggest an extraction method for preparing the extract from green tea leaves that possess enhanced antioxidant and antibacterial activities. Different ethanol concentrations were tested to recover phenolics and flavonoids, and 50% ethanol was the best under heat treatment (121℃, 15 min). The ethanol extract exhibited excellent DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity and growth inhibition against B. cereus, B. licheniformis, S. aureus subsp. aureus, and A. hydrophila subsp. hydrophila. To enhance the antioxidant and antibacterial activities, cell-wall degrading enzymes (2.5% cellulose+2.5% pectinase, v/w dry sample) treatment and Saccharomyces cerevisiae fermentation were applied singly or in combination. The enzymatic treatment of green tea leaves notably increased extraction yield. However, the antioxidant and antibacterial activities of the extract were lower than those of the control (heat-treated 50% ethanol extract). In contrast, the yeast fermentation alone did not affect the yield, but enhanced antioxidant and antibacterial activities, contributing to the increase in the extract's total phenolic and flavonoid contents.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.191-205
• /
• 1997

Measurements on subsurface movement of the Songsanri tomb site including the Muryong royal tomb was conducted using a tiltmeter system for the period of 15 months form July 7, 1996 to September 30, 1997. Two coordinate tilt monitoring data shows the biggest movement rate of 2.3mm/m/yr toward south in the frontal wall(N-S tilt) of the Muryong royal tomb. Southward tilting of bricks above the southern fire place in the western wall of the Muryong royal tomb is a proof of southward tilting of the royal tomb since its excavation in 1971. The eastern wall of the Muryong royal tomb is also tilting toward inside the tomb with the rate of 1.523mm/m/yr. Furthermore, tilting rate of wall increases twice in rainy season. It is interpreted tbat infiltration of water into the tomb and nearby ground in rainy season results in dangerous status for the safety of tomb structure. On the whole, normal component tilting of the walls of the 5th tomb is large than its shear component. It shows a small displacement toward one direction without no abrupt change in its direction and amount of tilting. The tilting rate of walls of the 6th tomb is about 8.8mm/m/yr in the dry season which is much bigger than those of other tombs in rainy season. Deformation events of walls of the tombs are closely related to amount of precipitation and variation of temperature. In comparison with different weather conditions, tilting is much bigger during the period of rainy weather than sunny weather. It is interpreted that rainwater flew into the turm through faults and nearby ground. High water content in nearby ground resulted strength of ground. The tilting event of walls shows a hysterisis phenomenon in analysis of temperature effect on tilting event. The walls tilt rapidly with steep rising of temperature, but the tilted walls do not come back to original position with temperature falling. Therefore, a factor of steep increase of the temperature must be removed. It means the tomb have to be kept with constant temperature. The observation of groundwater level using three boreholes located in construction site and original ground represented that groundwater level in construction site is higher than that of original ground during the rainy season from the end of June to August. It means that the drainage system of the Muryong royal tomb is worse than original ground, and it is interpreted that the poor drainage system is related to safety of tomb structure. As above mentioned, it is interpreted that artificial changes of the tomb environment since the excavation, infiltration of rainwater and groundwater into the tomb site and poor drainage system had resulted in dangerous situation for the tomb structure. According to the result of the long period observation for the tomb site, it is interpreted that protection of the tomb site from high water content should be carried out at first, and the rise of temperature by means of the dehumidifier inside the tomb must be removed.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• 보존과학연구
• /
• s.35
• /
• pp.73-86
• /
• 2014

The Seosanmaaesamjonbulsang (national treasure 84) is carved has a quite developed tectonic line in a precipitous wall of stratified rock to the vertical and horizontal directions. The main buddha and the left part of it have got the biological weathering and the efflorescence has been detected on the shoulder part of the right buddha. It has been caused by the raindrops from upper rock after the dismantling of the protection shelter in 2007. Two proper measures have been taken in order to reduce the weathering and protect it from some damages. The one is removing the contaminant by dry/wet cleaning not to get any damage on the rock. The other is the isolation by the construction of a new waterway used L-30 on the upper part of the rock not to contaminate the surface of Rock-carved triad buddha with the raindrops from upper rock. Moreover, the sunlight for buddha has been increased and good ventilation has been made by cutting down the trees around the Rock-carved triad buddha.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.27-34
• /
• 2005

We have investigated the correlation between the active-layer uniformity and reliability of InGaN/GaN blue LEDs. According to initial characteristics, the devices are classified into two groups: group I devices of uniform light-emission and group II devices of non-uniform light-emission. The group II devices are more dependent on temperature and we have found two degradation mechanisms through reliability test. One is bulk degradation in which the degradation occurred over the entire chip and another one is edge degradation in which the degradation occurred from the edge of the chip. Bulk degradation caused by the nonradiative defects is found to be faster in group II devices while there is no difference in the rate of the much faster edge degradation, where darkening starts from the n-Ohmic contact edge. Therefore, more uniform active layer, more uniform current spreading, and the passivation of the dry-etched side-wall are essential for the high reliability of InGaN/GaN LEDs.

• Journal of Radiation Protection and Research
• /
• v.18 no.1
• /
• pp.25-35
• /
• 1993

To develop a technique of theoretical alpha track density calculation for comparison with measured track density, an electrostatic ion spectrometer was specially designed and fabricated. The mobility spectrum of first radon daughter(Po-218) in the range of $0.07{\sim}5.0cm^2/V\;s$ from the radon chamber was measured using-the electrostatic ion spectrometer. Measurement was taken in a radon chamber operated using dry particle free air passed through silica gel, activated charcoal and molecular sieve filters. The mobility of a new-born Po-218 ion measured by the electrostatic ion spectrometer was determined to be $1.92cm^2/V\;s$. A comparison of the theoretical and measured alpha track densities was completed and uncertainties concerning the shape of the spectrum were analyzed. It was found that the discrepancies in track densities are primarily Que to the neglect of wall loss of ions in the theoretical track density calculation.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.71-95
• /
• 1995

To be helpful to the treatment of pulmonary cancer with oriental medicine, we got clinical reports together and analyzed the data. The results were obtained as follows: 1. The treating methods could be summarized as three methods that were reinforcing vital energy, eliminating harmful Qi, and reinforcing vital energy with eliminating harmful Qi. The methods of reinforcing vital energy were supplementing Qi & Yin, increasing pahological heat & reinforcing kidney, augmenting Qi & blood, supplementing vital energy and strengthening fundermental energy, reinforcing spleen and increasing Qi, lubricate Yin and lung, and the other methods of eliminating harmful Qi were transforming pathological fluid and softening, clarifying heat and eliminating poison, dipersing lung and softening, toxicding and softening, guiding Qi and activating blood, clarifying heat and dispersing lung, guiding Qi and counteracting stress etc., and the methods of supplementing vital energy with eliminating poison were reinforcing spleen and transforming pathological fluid, increasing Qi and activating blood, supplementing Yin and clarifying heat, reinforcing spleen and dry the dampness, lubricating lung and transforming patholigical fluid and supplementing Qi and activating blood. 2. The oriental prescriptions used for pulmonary cancer were Chunkeum-Weekyungtang & Sohamhwingtang, Jinhayookgunjatang, Hyulboochukeotang, Bokbangkyogonamtang was reported to be effective in the treatment of metastasis. 3. Bokbangshinjingtang and haewool were applied for the complications of pulmonary cancer, Soshihotang for fever, hangamryung for tumor pain. Prunus ansu Komarov, Eriobotrya japonica Lirdley, Pyrrosiae lingua Farwel, Steomon japonica Miguel, Maximowiczia chinensis Ruprecht var, Morus bombycis Koidzumi for cough, Panax Pseudo-ginseng Wall. var, Bletilla striata Reichenbach f., Acacia catechu(兒茶) for hemoptysis, Lonicerae flos, Aspongopus chinensis(九香蟲) for chest pain, Cypsum Fibrosum, Gazella gutturosa, Scutellaria baicalensis Georgi, Gypsophila oldhamiana Miquel for fever, Lepidii semen descurainiae semen, Belamcanda chinensis D.C, Gnaphalium affine(佛耳草) for asthma. 4. For the reduction of side effect by chemotherapy and radiotherapy it was known that supplementing Qi was used chiefly for side effect of chemotherapy and augmenting Yin applied to side effect of radiotherapy. 5. The oriental presciptions were suggested for the side effect by chemotherapy and radiotherapy ; Sammaekaek(參麥液), Whaebokwontang(化瘀復元湯), Hwangjungomitang(黃精五味湯), Yukmijihwangtang(六味地黃湯), Hyangsayukgunjatang(香砂六君子湯), Samlyeekulsan for side effect by chemotherapy while Geumgweisingiwhan, Hwanglyentang(黃連湯), Hwanglyenhaedoktang(黃連解毒湯), Yangyeunchungpeitang(養陰淸肺湯), Idongtang(二冬湯), Jayeunkanghwatang(滋陰降火湯) for side effect by radiotherapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.955-961
• /
• 2013

This study aimed for the scientific approach of Korean traditional house, so called Hanok, by analyses of structural elements and thermal environmental performance. Hanok is a very unique vernacular architectural style of the Middle East Asia that fits with climate conditions of the Korean Peninsular, designed to withstand high temperature and humidity in summer and cold and dry in winter seasons. In order to evaluate thermal environment of Hanok, its sectional structure such as floor, wall, roof structure and Ondol which is Korean traditional floor heating system, was built in 3D, as well as heat transfer mechanism of its composing elements was analyzed through 3 dimensional steady state analysis. The results of the thermal environmental performance of Hanok will be used as a basic datum of design guidelines for accomplishing ecologic housing fitted with local climate.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1856-1862
• /
• 2015

In order to improve the stability of endoglucanase under thermal and acidic conditions, the endoglucanase gene was fused to the N-terminus of the Saccharomyces cerevisiae pir gene, encoding the cell wall protein PIR. The fusion gene was transformed into Pichia pastoris GS115 for expression. A resulting strain with high expression and high activity was identified by examining resistance to Geneticin 418, Congo red staining, and quantitative analysis of enzyme activity. SDS-PAGE analysis revealed that the endoglucanase was successfully displayed on the yeast cell surface. The displayed endoglucanase (DEG) showed maximum activity towards sodium carboxyl methyl cellulose at approximately 275 IU/g cell dry weight. DEG exhibited greater than 60% residual activity in the pH range 2.5-8.5, higher than free endoglucanase (FEG), which had 40% residual activity at the same pH range. The highest tolerated temperature for DEG was 70℃, much higher than that of FEG, which was approximately 50℃. Moreover, DEG showed 91.1% activity at 65℃ for 120 min, while FEG only kept 77.8% residual activity over the same period. The half-life of DEG was 270 min at 65℃, compared with only 150 min for FEG. DEG could be used repeatedly at least three times. These results suggest that the DEG has broad applications as a yeast whole-cell biocatalyst, due to its novel properties of high catalytic efficiency, acid-thermal stabilities, and reusability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.3
• /
• pp.320-325
• /
• 2005

Effect of period of adaptation and levels of monensin were studied for microbial fermentation/ digestibility to find out the optimum period of adaptation of monensin in rumen and suitable level of monensin in wheat straw+concentrate and wheat straw+UMMB diet. The mean digestibility of dry matter was decreased upto T-3 treatment (49.17%), however, digestibility of DM was affected upto period (P-2). NDF digestibility was affected due to treatment under P1 and P2 (p<0.05). Average digestibility of ADF was increased to 53.33% at T-3 level of monensin and P4 days of adaptation. TVFA (mmole/100 ml) were decreased from 9.49 in T-1 to 7.70 in T-7. Periods were not effectives except P2 (14 days of adaptation). Similarly, total gas was decrease with the increase of monensin levels in diet. Although acetate percentage in TVFA was not affected either due to level of monensin or period of adaptation but propionate was increased due to increase in monensin at 21 days of adaptation (P-3). Butyrate (%) was decreased significantly in T-2 to T-6 as compared to T-1 group. Total gas was significantly (p<0.01) higher in group T-1 (control) and it reduced significantly in T-5, however, differences in gas production between group T-3, T-5 and T-7 at P-1 was not significant. Methane production was reduced on P-3 and P-4 level of adaptation due to treatment. The overall result indicated that 21 days of adaptation with monensin was sufficient to mask the inhibiting effect of monensin to cell wall digestibility and 35 ppm monensin is optimum to reduce methane production and increase propionate productions.