• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.256-261
• /
• 2015

Trampling stress in turfgrass fields caused by traffics often occurs in zoysiagrass (Zoysia japonica) fields including golf course. In order to know the influences of trampling stress on the growth and development of turfgrass, leaf and root growth, chlorophyll fluorescence, chlorophyll content and 2-DE protein analysis were conducted in the turfgrass plants subjected to various levels of trampling stress from 0 to $9,420J\;day^{-1}$ day. Shoot growth was more highly inhibited by trampling stress than root growth. Although root growth was affected by trampling with weak intensity, the highest root length was observed in the turfgrass treated with weak trampling ($1,570J\;day^{-1}$). Chlorophyll fluorescence (Fv $Fm^{-1}$) was drastically lowered by trampling stress with moderate intensity. Leaf number showed similar tendency with leaf greenness. The number was decreased as the trampling intensity was increased. Shoot dry weight was decreased showing a similar tendency with the result of shoot length. The specific protein expressions under weak trampling were related to the functions of stress amelioration. Heat shock 70 kDa protein 10 and oxygen-evolving enhancer protein 1 were the proteins increased positively under trampling stress.

• Clean Technology
• /
• v.26 no.2
• /
• pp.96-101
• /
• 2020

In this paper, the commercial feasibility of trigeneration, producing heat, power, and hydrogen (CHHP) and using biogas derived from macroalgae (i.e., seaweed biomass feedstock), are investigated. For this purpose, a commercial scale trigeneration process, consisting of three MW solid oxide fuel cells (SOFCs), gas turbine, and organic Rankine cycle, is designed conceptually and simulated using Aspen plus, a commercial process simulator. To produce hydrogen, a solid oxide fuel cell system is re-designed by the removal of after-burner and the addition of a water-gas shift reactor. The cost of each unit operation equipment in the process is estimated through the calculated heat and mass balances from simulation, with the techno-economic analysis following through. The designed CHHP process produces 2.3 MW of net power and 50 kg hr^-1 of hydrogen with an efficiency of 37% using 2 ton hr^-1 of biogas from 3.47 ton hr^-1 (dry basis) of brown algae as feedstock. Based on these results, a realistic scenario is evaluated economically and the breakeven electricity selling price (BESP) is calculated. The calculated BESP is ¢10.45 kWh^-1, which is comparable to or better than the conventional power generation. This means that the CHHP process based on SOFC can be a viable alternative when the technical targets on SOFC are reached.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.287-294
• /
• 2019

GGBFS(Ground Granulated Blast Furnace Slag) has been widely used in concrete for its excellent resistance chloride and chemical attack, however cracks due to hydration heat and dry shrinkage are reported. In many International Standards, GGBFS with low fineness of 3,000 grade is classified for wide commercialization and crack control. In this paper, the mechanical and durability performance of concrete were investigated through two mix proportions; One (BS) has 50% of w/b(water to binder) ratio and 60% replacement ratio with low-fineness GGBFS, and the other (TS) has 50% of w/b and 60% replacement ratio with 4000 grade and FA (Fly Ash). The strength difference between TS and BS concrete was not great from 3 day to 91 day of age, and BS showed excellent performance for chloride diffusion and carbonation resistance. Two mixtures also indicate a high durability index (more than 90.0) for freezing-thawing since they contain sufficient air content. Through improvement of strength in low fineness GGBFS concrete at early age, mass concrete with low hydration heat and high durability can be manufactured.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.113-119
• /
• 2011

Safe operation and maintenance of engineered dry storage systems for spent fuel from nuclear power plants basically depends on adequately adopted design requirements. The most important design target of the system are those which provide the necessary assurances that spent fuel can be received, handled, stored and retrieved without undue risk to health and safety of workers and the public. To achieve these objectives, the design of the system incorporates features to remove spent fuel residual heat, to provide for radiation protection, and to maintain containment over the lifespan of the system as specified in the design specifications. The features also provide for all possible anticipated operational occurrences and design basis events in accordance with the design basis as guided by the designated regulations. The general performance requirements of a projected storage system are introduced in this paper. The storage system is designed to store fuel assemblies in associated with designated regulatory requirements. Small increases/decreases in maximum burnup can be adjusted with cooling time. These variations are compensated for by a corresponding small site-specific increase/decrease in the design basis-cooling period, as long as the maximum heat load and radioactivity of loaded fuel assemblies are met. Generic design basis events considered for the storage system are summarized. Shielding and radiological requirements along with mechanical and structural are derived in this study.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.243-249
• /
• 2006

An experimental study on the refrigerant-side pressure drop of slit fin an tube heat exchanger has been carried out. A comparison was made between the predictions of previously proposed empirical correlations and experimental data for the pressure drop on design conditions of condenser in micro-fin tube for R22 and Rl34a. Experiments were carried out under the conditions of inlet refrigerant temperature of $60^{\circ}C$ and mass fluxes varying from $150\;to\;250\;kg/m^{2}s$ for R22 and Rl34a. The inlet air conditions are dry bulb temperature of $35^{\circ}C$, relative humidity of 40% and air velocity varying from 0.68 to 1.43 m/s. Experiments show that pressure drop for R134a was $22{\sim}22.6%$ higher than R22 for the degree of subcooling $5^{\circ}C$ For the mass fluxes of $200{\sim}250\;kg/m^{2}s$, the deviation between the experimental and predicted values for the pressure drop was less than ${\pm}20%$ for R22 and Rl34a.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.18-24
• /
• 2019

Isoflavones, a group of secondary metabolites present in plants and especially abundant in soybeans, are garnering increasing interest because of their medicinal properties. Numerous environmental factors influence isoflavone accumulation in plants. Successful attempts to increase isoflavone contents in soybean seeds have not been widely reported. In this report, we examined an effective method for producing a high amount of isoflavones during soybean seed germination, by treating the seed with 4 abiotic factors. Soybean seeds were exposed to ultrasound (50 Hz) and heat ($40^{\circ}C$) for 30minutes, then germinated for 5 days in darkness. Another sample was subjected to water deficit during germination in darkness, and the other sample was subjected to light conditions during the germination period. The results showed that the ultrasound treatment increased isoflavone content during soybean germination. Three days after germination, the ultrasound-treated seeds presented the highest isoflavone content (6,042.1 ug/g dry weight) compared to the other treatments, which was also 1.3-fold increases over the content of the raw seed's before germination. With respect to each type of isoflavone group, aglycone (partially genistein) content was markedly higher, whereas glucoside was lower than that of the untreated samples. In other experiment, total isoflavone content after heat, water deficit, and light treatments was 5,600.0, 4,740.1, and 5,631.4 ug/g, respectively. These present work suggests that ultrasound treatment is a novel approach for improving the production of isoflavones in soybean seeds during germination.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.12-18
• /
• 2024

High-rise, large-scale, and diversification of buildings are possible, and the reduction of concrete cross-sections reduces the weight of the structure, thereby increasing or decreasing the height of the floor, securing a large number of floors at the same height, securing a large effective space, and reducing the amount of materials, rebar, and concrete used for designating the foundation floor. In terms of site construction and quality, a low water binder ratio can reduce the occurrence of dry shrinkage and minimize bleeding on the concrete surface. It has the advantage of securing self-fulfilling properties by improving fluidity by using high-performance sensitizers, making it easier to construct the site, and shortening the mold removal period by expressing early strength of concrete. In particular, with the rapid development of concrete-related construction technology in recent years, the application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher is expanding in high-rise buildings. However, although high-rise buildings with more than 120 stories have recently been ordered or scheduled in Korea, the research results of developing ultra-high-strength concrete with more than 130 MPa class considering field applicability and testing and evaluating the actual applicability in the field are insufficient. In this study, in order to confirm the applicability of ultra-high-strength concrete in the field, a preliminary experiment for the member of a reduced simulation was conducted to find the optimal mixing ratio studied through various indoor basic experiments. After that, 130 MPa-class ultra-high-strength concrete was produced in a ready-mixed concrete factory in a mock member similar to the life size, and the flow characteristics, strength characteristics, and hydration heat of concrete were experimentally studied through on-site pump pressing.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.1
• /
• pp.11-18
• /
• 2024

Recently, there have been attempts to claim the hair moisturizing effect for a hair care product, however there has not yet been an official evaluation method because heating temperature for hair has not been established. This study was conducted to establish a quantitative evaluation for hair water content. In order to observe the behavior of water inside hair, heat was applied to hair with various temperatures using thermogravimetric dry residue. As the heating temperature increased, the amount of moisture released from the hair increased. As a result of evaluating hair using a differential scanning calorimeter (DSC), a unique phenomenon in which a rapid endothermic reaction occurs around 75 ℃ was observed. This phenomenon was also observed in different ethnic hair. In hair that damaged the hair cuticle barrier with oxidation and heat, this rapidly rising endothermic reaction temperature occurred at 77 ℃, which was slightly higher, and 73 ℃ was observed when this hair was applied with polar oil, conditioning polymer, or keratin protein. To determine how this reaction affects the hair surface, friction test was performed using an atomic force microscope. When heated above 75 ℃, cuticle friction increased, however when heated above 90 ℃, there was no change in hair cuticle friction. Finally, it was confirmed that around 75 ℃ is the critical temperature at which desorption of water bound to the hair occurs. It is suggested that a heating temperature of 75 ℃ is the optimal temperature for detecting and quantifying the moisture content of hair, and that approximately 10% detected at 75 ℃ can be a standard value for hair moisture content.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.1043-1055
• /
• 2023

This study was conducted to suggest an extraction method for preparing the extract from green tea leaves that possess enhanced antioxidant and antibacterial activities. Different ethanol concentrations were tested to recover phenolics and flavonoids, and 50% ethanol was the best under heat treatment (121℃, 15 min). The ethanol extract exhibited excellent DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity and growth inhibition against B. cereus, B. licheniformis, S. aureus subsp. aureus, and A. hydrophila subsp. hydrophila. To enhance the antioxidant and antibacterial activities, cell-wall degrading enzymes (2.5% cellulose+2.5% pectinase, v/w dry sample) treatment and Saccharomyces cerevisiae fermentation were applied singly or in combination. The enzymatic treatment of green tea leaves notably increased extraction yield. However, the antioxidant and antibacterial activities of the extract were lower than those of the control (heat-treated 50% ethanol extract). In contrast, the yeast fermentation alone did not affect the yield, but enhanced antioxidant and antibacterial activities, contributing to the increase in the extract's total phenolic and flavonoid contents.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.121-126
• /
• 2009

Korean ginseng (Panax ginseng C. A. Meyer) has been used as an important medicinal plant in the Orient for a long time. It has been claimed that ginseng has many beneficial bioactive effects on human health, such as antitumor, antistress, antiaging and enhancing immune functions. Red ginseng possibly have new ingredients converted during steaming and dry process from fresh ginseng. In this study, pharmacological efficacy and ingredient conversion of ginseng by 9 repetitive steaming and drying process were investigated measuring conversion efficiency of acidic-polysaccharide, phenolic compounds and inhibition of peroxide lipides. It was found that acidic-polysaccarides were increased by heat treatment. In addition, maltol of phenolic compounds, strong antioxidant, produced during the process of red ginseng by Maillard reaction. Acidic-polysaccarides and maltol were increased after the 1st and 3rd steaming and drying treatments, but they were decreased gradually after 5th, 7th, and 9th treatments. Antioxidant activity was increased as increasing treatment times of steaming and drying without significance. Effect of red ginseng extract on inhibition of peroxide was increased gradually until after the 7th treatment, but remarkably decreased after the 9th treatment.