• 한국농공학회지
• /
• 제18권3호
• /
• pp.4171-4183
• /
• 1976

This study is to investigate the effect of some physical properties of soil on the compaction. The compaction effect depends upon various factors such as soil type, moisture content, gradation and compaction energy. In this study, with steady compaction energy, the relationships between maximum dry density and moisture content, gradation and consistency were analyzed by soil types. Some results obtained in this study are summarized as follows 1. Generally, the coarser the grain size, the bigger is the maximum dry density and the smaller is the optimum moisture content and its moisture-dry denisty curve is relatively steep. The finner the grain size, the smaller is the max. dry density and the bigger is the opt. moisture content and its moisture-dry density curve is less steep. 2. The relationship between max. dry density (${\gamma}$dmax) and opt. moisture content, void ratio, clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation ${\gamma}$dmax =ao+a1X(a0>0, a1<0) 3. The relationship between opt. moisture content (Wopt) and clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation Wopt=a0+a1X(a0>0, al>0). 4. The fact that maximum dry density of the compacted soil is decreased with the increase of the optimum moisture content in any types of soil tested, and the fact that optimum moisture content can be positively correlated with clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil, lead to the conclusion that clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil are direct factors in reduction of the maximum dry density of engineering soil.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.11-20
• /
• 2018

양호한 성토재료는 현장에서 즉시 입수가 곤란하고 재료의 확보를 위한 추가적인 비용이 발생하여 각 현장에서는 현장 발생토를 직접 사용하는 경우가 많지만, 현장 발생토는 대부분 성토재료의 기준에 적합하지 않기 때문에 성토체의 안정성이나 강성을 확보하는데 어려움이 있다. 본 연구에서는 성토재료로 부적합한 흙의 다짐시 발생하는 문제점들을 개선하기 위하여 토목섬유를 보강하여 실내다짐시험과 현장다짐실험을 하였다. 실내다짐시험(KS F 2312)의 A, D다짐시험과 A다짐시험에서 다짐에너지와 토목섬유의 보강 층수를 다르게 하였고, 현장다짐실험은 함수비가 높은 현장 발생토에 토목섬유를 보강하고 다짐을 실시하였다. 그 결과, 실내다짐시험에서는 토목섬유를 보강함으로써 최적함수비는 감소, 최대건조밀도 증가하여 다짐곡선은 다짐에너지를 증가시켜 다짐한 경우와 비슷한 거동을 하였고, 건조밀도와 다짐에너지의 관계로부터 다짐에너지는 토목섬유를 1열, 2열 보강하였을 때 각각 평균 2.10배, 평균 2.71배 증가하여 토목섬유를 보강하고 다짐하면 큰 다짐에너지로 다짐한 것과 같은 효과로 더 효율적인 다짐이 가능한 것으로 분석되었다. 그리고 현장다짐실험에서 토목섬유를 보강함으로써 건조밀도는 증가하는 것으로 분석되어 다짐시 토목섬유를 보강하여 다짐을 실시하면 함수비가 높고 성토재료로 부적합한 현장 발생토를 사용하더라도 효율적인 다짐이 가능한 것으로 입증되었다.

• 한국농공학회지
• /
• 제21권2호
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• 한국농공학회지
• /
• 제28권4호
• /
• pp.66-76
• /
• 1986

This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.47-54
• /
• 2012

As a large construction such as highway, dam, reclaimed land etc. increase in number more and more, large amount of fill materials are required. It is needed to utilize a gypsum which is a by-product yielded from chemical plants, as fill materials. Though some studies have been conducted to know a engineering characteristic of gypsum, it is not certain that water contents were checked at $45^{\circ}C$ dry oven. This study proposed that water contents must be measured at $45^{\circ}C$ dry condition because gypsum is changed to other types as a dry temperature. As the results obtained by compaction tests, it is found that moisture of gypsum in compaction must be within -5.0~2.5 % O.M.C (optimal moisture content).

• 한국농공학회지
• /
• 제12권1호
• /
• pp.1854-1860
• /
• 1970

Results of this study on the influence of percent passing of No. 200 sieve on soil compaction are as follows; 1. The higher maximum dry density of soil is, the lower optimum moisture content is. Maximum dry density is highest value and optimum moisture content is the lowest value in twocases that percents of No. 200 sieve are 30% in soils of which percents retained on No. 10 sieve are 5% and 10% respectively. 2. Maximum dry density increases according as uniformity coefficient increase. Maximum dry density is the highest when uniformity coefficient is approximately 300 in soil of which maximum diameter is 4.76mm. 3. Maximum dry density has a tendency to become large according as value of Cu Caincrease. Correlation between maximum dry density and $Log_{10}$(CuCa) shows straight line. 4. Maximum dry density increases according as n increase and reaches the peak when n equal 0.35 in condition that the index of talbot formula n is less than 0.35 in soil of which maximum diameter is 4.76mm. 5. Maximum dry density has a tendency to increase according as value of Cg $(Cg=\frac{P_{50}^2}{P_{10}{\times}{P_{200}}$) decrease.

• 한국농공학회지
• /
• 제12권2호
• /
• pp.1927-1936
• /
• 1970

This is a study on the influence of percent retaining of No. 10 sieve on soil compaction. Reviewing the test values in part 1 and part 2, a relative equation to predict maximum dry density and optimum moisture content was induced. Results of the study are as follow; 1. Maximum dry density increases according as percent retatining of No. 10 sieve increase untill 40%, but it decreases in more than 50%. 2. Maximum dry density has the greatest value at 25%, also it decreases according to increase or decrease at 25% in percent passing of No. 200 sieve. 3. Grain size distribution that Maximum dry density is largest, is 40% in 4.76mm to 2.0mm, 35% in 2.0mm to 0.074mm, 25% in lese than 0.074mm. 4. Correlation betwesn Maximum dry density and optimum moisture content made a curved line. The deviation between maximum dry density to be predicted from optimum moisture content and test values, is less than about 5%. 5. Range of deviation between optimum moisture content to be predicted from classification area and uniformity coefficient isless than about 20%, which belongs to range of moisture content that is correspondent with 95% of maximum dry density, generally.

• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.1117-1123
• /
• 2016

롤러전압콘크리트포장 공법은 기존 시멘트 콘크리트 공법의 재료 특성 및 아스팔트 포장의 시공특성을 공유하는 포장 방식이다. 일반 시멘트 콘크리트 포장의 우수한 구조적 성능을 유지하면서, 아스팔트 시공 장비를 사용하여 간소한 시공절차로 경제성을 확보할 수 있다. 롤러전압콘크리트포장 공법은 수화반응과 롤러다짐에 의한 골재 맞물림 효과로 일반 시멘트 콘크리트 포장보다 적은 시멘트량을 사용하여도 충분한 강도를 발현할 수 있다. 또한 일반 시멘트 콘크리트 포장과 동등한 강도 특성을 발휘 할 수 있으며, 본 연구에서는 RCCP의 다짐도와 압축강도의 관계를 정량적으로 도출하고자 한다. 롤러전압콘크리트의 다짐에너지를 변화시키면서 다양한 다짐도를 갖는 시편을 제작하였다. 다짐도는 시편의 건조단위중량과 최대건조단위중량의 비로 정의하였으며, 다양한 다짐도로 성형된 시편의 28일 압축강도를 평가하였고, 다짐도에 따른 강도비의 관계를 도출 하였다. 따라서 롤러전압콘크리트 공법의 국내 현장적용을 위한 다짐도에 따른 강도비의 중요성을 부각하여 현장 다짐도 관리에 적용할 수 있을 것으로 판단된다.

• 한국농공학회논문집
• /
• 제48권4호
• /
• pp.59-66
• /
• 2006

In this study, construction modulus, void ratio and settlement characteristics of 38 CFRD in domestic and foreign countries were investigated from monitoring data. The effect of field dry density and void ratio to dam body was analyzed. The standard void ratio of CFRD that can be easily used by dam designers and field engineers was proposed from the monitoring data. It was confirmed that we can get the degree of compaction needed for reasonable compaction of dam body by calculating the field dry density from inverse operation of the standard void ratio. It was thought that the void ratio of CFRD depends on shape coefficient and in case of a high shape coefficient, the void ratio was high with its void ratio 0.17 -0.38.

• 한국초지조사료학회지
• /
• 제11권2호
• /
• pp.84-89
• /
• 1991

본 시험은 alfalfa파종시 겉뿌림 및 다른 파종방법들이 alfalfa의 생육. 건물수량.조단백질 생산량 및 잡초발생에 미치는 영향을 구명하고자 겉뿌림, 겉뿌림+갈퀴질, 겉뿌림+갈퀴질+쇄압, 경운+산파+쇄압 및 경운+조파+쇄 등 5개 처매구를 두고, 1988년 9월부터 1989년 10월까지 축산시험장 초지시험포에서 수행되였으며, 결과를 요약하면 다음과 같다. 1.경운방법으로 6개월후에 토양산도와 토양의 매화학적 특성은 개선되었다. 2 알팔파의 정착개체수는 갈퀴질이나 쇄압으로 증가하였으며, 겉뿌림보다 경운시 크게 증가 하였다 (P<0.05). 3. 1차 이용시 잡초솔은 갈퀴질이나 쇄압으로 감소하였으며, 겉뿌림보다 경운시 크게 감소하였다. 2차 이용시 잡초솔은 전 시험구에서 현저히 감소하였으나 3차와 4차 이용시 잡초솔은 점차 증가하였다. 4 .알팔파의 건물수량은 갈퀴질이나 쇄압으로 현저히 증가하였으며 겉뿌림보다 경운시 유의적인 증가를 보였고(P<0.05), 경운 산파시 가장 높은 수량을 나타냈다. 5. 2차 이용시 조단백질 생산량은 쇄압으로 증가 하였고, 겉뿌림보다 경운시 크게 증가하였다(p