• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1543-1546
• /
• 1994

Ignitabilility of explosive gas mixture by spark of dry cell in case of short circuit by accident was studied for the purpose of evaluation of intrinsically safe characteristics of dry cell that manufactured in Korea. IEC type spark test apparatus, $21{\pm}2$ Vol% of hydrogen - air mixture, and dry cell that produced in Korea was used for the experiment. The result of this research could be used for design, manufacturing, and using the intrinsically safe electrical apparatus.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3423-3428
• /
• 2007

This paper shows that inlet humidity condition at cathode side is one of dominant parameters affecting the performance of PEMFC. To investigate effects of inlet humidity condition, the performance measurements were conducted for a single PEMFC with two operating variables : cathode relative humidity and dry condition in anode dry. The fuel cell employed for the experiments is a unit PEMFC with a 25$Cm^2$, Nafion$^(R)$112 membrane. As a result of this study, the cell performance is getting higher by increasing inlet humidity condition at cathode side. The cell performance is different from each operating temperature an it has maximum30% higher than dry condition at 60$^{\circ}C$ operating temperature with 80% relative humidity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.641-642
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.508-516
• /
• 1999

Polycrystalline powder of LixNi0.85Co0.15O2 was synthesized by pyrolyzing a powder precursor obtained by the PVA-precursor method. Coin cells of lithium-ion rechargeable battery were assembled, whose the cathodes were fabricated from the crystalline powders of LixNi0.85Co0.15O2 synthesized by the method. The effect of synthetic variation on the property of the cell was tested by carrying out 100 consecutive cycles of charge-dis-charge on the cells. The property of the cell was largely influenced by the pyrolysis conditions applied for the synthesis of the LixNi0.85Co0.15O2. Depending on whether the pyrolysis was carried out in standing air or in the flow of dry air, the discharge capacity and cycle-reversibility of the cell varied in large extent. When the powder precursor was pyrolyzed in standing air, a minor phase of lithium carbonate was remained in the LixNi0.85Co0.15O2. The carbon containing powder precursor had to be pyrolyzed in the flow of dry air to eliminate the minor phase. In the flow of dry air, the lithium carbonate in the precursor was eliminated over 500-700。C without any prominent heat event. By controlling the flow of air over the precursor during its pyrolysis, particle size could also be altered. The effect of flowing dry air, during first step pyrolysis or during second step heat treatment, on the property of the cell was discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.792-797
• /
• 2009

The stress-strain characteristics of compacted bentonite are investigated using experimental triaxial compression test by Hoek-cell. Special attention given to various dry density and water absorption ratio. Based on the test results, it is shown that the stress-strain relationship of compacted bentonite is highly influenced by dry density and water absorption ratio. Also, characteristics of Bentonite is similar to the clay rather than sand. Strength of compressed Bentonite increases with higher dry density. It shows maximum strength value, if in a same condition with dry density and constrain pressure. So we determine that value as the optimistic moisture contents for the maximun strength of compressed Bentonite.

• Journal of Life Science
• /
• v.6 no.2
• /
• pp.94-103
• /
• 1996

To understand effect of inoculum size, cell density, sucrose concentration and concentrations of MS basal on suspension culture and protoplast isolation of wild viola(Viola patrinii DC.) callus from petiole segments this experiment was conducted. In the lot of 30 mesh inoculum size, two observations were; One was that a considerable increase in the fresh and dry weight of callus was determined. Another was that the callus mass was relatively compact compared with others. A recommendable cell density was 0.4g for 20ml culture medium and the higher sucrose concentration, the higher fresh and dry weight were obtained. The dilution of MS basal salt was differently affected on fresh and dry weight; the highest fresh weight was found in 1x MS salt, while the higest dry weight was in 1/3x dilution.The addition of casein hydrolysate(3g/L) was more effective to increase of both fresh and dry weight. THe contents of protein was great in the inoculum lots with larger inoculum sizeand higher concentration of MS basal salts contenting 3g/L of casein hydrolysate and higher sucrose compared with others. The greatest protoplasts were isolated from the lot of 10 mesh size treated with 1%pectinase SE-150 and 2% cellulase YC. In general, for optimal protoplast isolation the followingconditions were recommended; 1) Use of smaller cell size cultured for 2-5 weeks, and 2) more than 5 hours incubation using the combined mixture of the enzymes with proper concentrations.

• Microbiology and Biotechnology Letters
• /
• v.14 no.4
• /
• pp.299-304
• /
• 1986

The cell volume, cell surface, cell concentration, dry cell weight, frequence of respiratory deficient mutation, resistance against ultraviolet irradiation, fermentation power, DNA contents of haploid diploid, triploid and tetraploid of Saccharomyces cerevisiae strain were investigated. Respiratory deficient mutants by spontaneous mutation were absolved more frequently in the haploid than in the diploid, triploid and tetraploid. And cell volume, cell surface, cell concentration, dry cell weight, resistance against ultraviolet irradiation, fermentation power, and DNA contents were significantly increased as the ploidy increased.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.6
• /
• pp.442-447
• /
• 2004

Cell growth and gomisin J production by suspension cultures of Schisandra chinensis Baillon were investigated under various culture media, initial sucrose concentrations, shaking speeds, and inoculum sizes. Callus was induced from in vitro cultivated leaf segments on MS medium supplemented with $1\;mg/{\ell}$ NAA. The maximum dry cell weight of 2.23 g was obtained at inoculum size of 0.5 g fresh cell weight and in MB5 medium supplemented with $1\;mg/{\ell}$ NAA, 3% sucrose after 8 weeks. The production of gomisin J in suspension cell cultures was maximized in WPM medium containing 5% sucrose. The shaking speed for maintaining maximal cell dry weight was 100 rpm while the best shaking speed for gomisin J accumulation was 140 rpm.

• Mycobiology
• /
• v.31 no.4
• /
• pp.226-228
• /
• 2003

The multiple correlation coefficient between the values determined by dry weight and those determined by fluorometer was observed with r=0.96 and the standard error of calibration was 0.034. Using the best calibration data, in order to reconfirm the reliability of the fluorometer results in comparison with those obtained by dry weight on the cell concentration, fedbatch cultures were carried out. The results obtained by fluorometer measurements were in good agreement with those obtained by dry weight. The on-line monitoring of cell concentration by the fermentor system linked to a computer equipped with fluorometer was successfully carried out.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.543-549
• /
• 1996

Recombinant Saccharomyces cerevisiae BZ-pJ containing the gene coding for metallothionein, a metalbinding protein was grown in the medium with high cadmium concentrations to study the characteristics of growth and cadmium uptake. High concentrations of cadmium reduced cell growth and final cell density and increased the lag phase periods of the recombinant yeast. Addition of 10 mg $Cd^{2+}$/L to the growth medium remarkably decreased a lag period and enhanced the specific cadmium uptake to 52.6 mg $Cd^{2+}$/g dry cell. The effect of copper addition was further investigated in the medium of 680 mg Cd2+/L. An increase in copper concentration from 11.0 to 33.3 mg/L enhanced the specific cadmium uptake from 17.0 to 42.0 mg Cd2+/g dry cell.