• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.99-107
• /
• 1997

This study was executed to test the possibility of replacement for domestic Japanese larch(Larix leptolepis) for hardwoods and to acquire the information about the effects of drying temperature on internal temperature, moisture content and drying defects. In high-temperature drying, internal temperature increased rapidly to boiling point, immediately after that point the internal temperature rising rate was reduced. In the case of drying at temperature of $125^{\circ}C$, internal temperature could reach at boiling point in a very short time. Moisture content in high-temperature drying showed constant drying rate period and first period of falling rate drying together in 4 hours since experiment begun. There was no strong correlation between initial moisture content and final moisture content. Average drying rate at $115^{\circ}C$, $120^{\circ}C$ and $125^{\circ}C$ was 1.42%/hr, 1.88%/hr and 2.02%/hr, respectively; the case of drying temperature of $125^{\circ}C$ showed most rapid drying rate. Drying rate of $125^{\circ}C$ was so rapid that it showed more severe shrinkage, bow, collapse, end check, and internal check development than in other drying conditions. The result of this study showed the strong possibility of high-temperature drying for Japanese larch, and to dry Japanese larch optimally, dry bulb temperature should not exceed $120^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.507-515
• /
• 2001

Significant improvements in bond strength between new and existing concrete can be achieved through the modification of the new concrete by latex. This study focuses on the investigation of bond strength of latex modified concrete. Pull-out bond test and uniaxial direct tensile bond test are adopted for evaluating the adhesion characteristics of latex modified concrete to conventional concrete substrate. The main experimental variables are test methods, latex-cement ratio, surface preparations and moisture levels. The results are as follows; The increase of latex-cement ratio substantially improves the adhesion between latex modified concrete and substrate. The effects of surface preparation at substrate into the bonding of latex modified concrete are quite different according to the conditions of surfaces. Thus, an adequate surface preparations are essential for good bond strength. Because the moisture level of the substrate may be critical to achieving bond, optimum moisture condition for a conventional concrete has evaluated in this study. The saturated condition of surface is the most appropriate moisture level among the considered, followed by dry condition and wet condition.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.41-50
• /
• 2002

Small clear specimens of Quercus acutissima Carr. and Larix caempferi Carr. were used to measure shrinkage and thermal conductivity for the reasonable and effective use. All samples were conditioned to 18, 12, 5% moisture contents in a humidity chamber of 86, 66, 20% relative humidity(RH), respectively and room temperature(23℃) All specimens were conducted on the shrinkage and thermal conductivity test at each MCs. These processes(cycle) were repeated three times. The radial and tangential shrinkages of Quercus acutissima Carr. and Larix caempferi Carr. decreased at each level of MCs, with the increasing cycles. The radial and tangential shrinkages increased as the specific gravity(on oven-dry weight and volume basis) increased. Thermal conductivities of the radial and tangential direction of Quercus acutissima Carr. and Larix caempferi Carr. increased at each levels of MCs, with increasing cycles. Good correlations were obtained between shrinkages and thermal conductivities of radial and tangential direction, and specific gravity (on oven-dry weight and oven-dry volume basis) and MC.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.405-412
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) to 16.7%(w.b) moisture contents using the prototype dryer. The average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to the conventional natural air dryer where is grains were not circulated during drying periods. The dryer performance evaluation index was 738.3KJ/(kg.water), which was more effective than that of grain circulation t)pe hot air dryer(3,500-5,000 KJ/kg.water).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.17-24
• /
• 2002

An unsteady-state moisture diffusion through cellulosic fibers in paper was characterized from the moisture sorption experiment and the mathematical modeling. The sorption experiment was conducted by exposing thin dry paper specimens to a constant temperature-humidity environment. Oven dried blotting papers and filter papers were used as test samples and the gains of their weights were constantly monitored and recorded as a function of sorption time. For a mathematical approach, the moisture transport was assumed to be an one-dimensional diffusion in thickness direction through the geometrically symmetric structure of paper. The model was asymptotically simplified with a short-term approximation. It gave us a new insight into the moisture uptake phenomena as a function of square root of sorption time. The fiber-phase moisture diffusivities(FPMD) of paper samples were then determined by correlating the experimental data with the unsteady-state diffusion model obtained. Their values were found to be on the order of magnitude of $10^{-6}-10^{-7}cm^2$/min., which were equivalent to the hypothetical effective diffusion coefficients at the limit of zero porosity. The moisture sorption curve predicted from the model fairly agreed with that obtained from the experiment at some limited initial stages of the moisture uptake process. The FPMD value of paper significantly varied depending upon the current moisture content of paper. The mean FPMD was about 0.7-0.8 times as large as the short-term approximated FPMD.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.492-497
• /
• 2008

The objective of this research is an investigation of engineering properties of weathered granite soil mixed with Phosphogypsum and recycled EPS beads as an light-weighted soil. A series of geotechnical laboratory tests including physical index test, compaction test, CBR test and direct shear test were performed for various mixing ratios. Based on the laboratory test results, it was found that the maximum dry unit weight of the light weight soil ranges $1.46{\sim}1.61g/cm^3$ and the maximum dry unit weight decreases about 11~19.3% with the increase of amount of the recycled EPS beads and the optimum moisture content increase. Since the CBR values of the light weight soil ranges 10.4~18.4%, the light weight soil mixed with Phosphogypsum and recycled EPS beads can be used as a light weight backfill material on the soft soil.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.98-101
• /
• 1994

The amount of added water for rice cooking was determined by extrusion test and sensory evaluation of cooked rice. The extrusion force was positively correlated with hardness and negatively correlated with moisture content and wetness of cooked rice. The extrusion force and moisture content of cooked rice were 57.9 kg and 62.3% respectively at the 'medium' wetness (neither too hard and dry nor too soft and watery) of cooked rice. The optimum water to rice ratio for the cooked rice haying 'medium' wetness was 1.46.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.5
• /
• pp.132-144
• /
• 2001

Iln order to figure out criteria of bentonite for using as impervious material of waste landfill, laboratory experiments were performed to reveal the geotechnical properties of soil-bentonite mixtures such as compaction test, direct shear test, unconfined compression test, triaxial compression test, consolidation test and permeability test. The results of the study are summarized as follows ; 1. Based on the compaction test, optimum moisture content increased with the increase of bentonite content, but maximum dry density decreased. 2. In unconfined compression test, the maximum strength of the soil-bentonite mixtures appeared at 10% bentonite content. The correlation equation between stress($\sigma$) and strain($\varepsilon$) of the soil-bentonite mixtures is given by ; $\sigma=\frac{a\cdot\varepsilon}{\varepsilon^n+b}$ 3. In shear test of the mixtures. the shear strength showed an increasing trend with increase of bentonite content and the maximum shear strength appeared at 10% bentonite content. 4. In consolidation test, the coefficient of compressibility $(a_v)$$(m_v)$$(C_v)$

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.99-102
• /
• 2007

To prepare freeze-dried ascorbyl palmitate (AsP)-containing liposome which can protect the drug from moisture attack and be used instantly by mixing with water for anti-aging and skin whitening therapy, AsP was encapsulated into liposomes and freeze-dried with trehalose. The freeze-dried liposome formulations were characterized by measuring water contents, particle size, time required for complete reconstitution. With the freeze-dried liposomes, we performed the stability test under accelerated conditions, skin permeation and localization test. The measurement of the time to perfect reconstitution showed that the freeze-dried liposomes can be changed to their initial state rapidly and short term stability test of AsP in reconstituted liposomes under accelerated conditions confirmed that the stability of AsP was considerably enhanced as compared to freshly prepared liposomes. The skin permeation and localization properties of AsP in reconstituted liposomes were not significantly different, indicating that the liposomal structures were maintained before and after freezedrying. In conclusion, the freeze-drying method provided a possible way to overcome the instability issue of AsP induced by the moisture and reproduced similar skin permeation and localization properties as shown by freshly prepared liposomes.