• 접착 및 계면
• /
• 제20권1호
• /
• pp.23-28
• /
• 2019

본 연구에서는 마이크로 또는 나노 입자 형상을 폴리디메틸실록산 (PDMS)에 전사시켜 건식접착제를 제조하고 특성에 대하여 고찰하였다. 20 nm, 40 nm, 70 nm의 직경을 가지는 구리 나노 입자형상과 $5{\mu}m$의 직경을 가지는 폴리메틸메타아크릴레이트 (PMMA) 마이크로 입자 형상을 전사시켜 PDMS 건식 접착제를 제조하였다. 입자의 종류 및 크기가 변화함에 따라 건식 접착제의 기계적 특성, 인장 접착강도, 표면 형상, 접촉각, 광학적 성질에 미치는 영향을 조사하였다. 20 nm 직경을 가지는 구리 나노 입자를 전사시켜 얻은 건식 접착제는 bare PDMS 필름에 비하여 300% 이상 향상된 인장 접착강도를 가졌다. 나노 입자를 전사시켜 얻은 큰 표면적 건식 접착제 구조가 높은 인장 접착강도를 부여하는 원인으로 추정된다. 본 연구결과는 나노 입자를 전사시키는 방법이 PDMS 건식 접착제의 제조에 있어 쉽고 효과적임을 시사한다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.200-209
• /
• 2019

To improve the water resistance of melamine-urea-formaldehyde (MUF) resins, different levels of blocked polymeric 4,4 diphenyl methane diisocyanate (B-pMDI) were blended with MUF resins to prepare B-pMDI/MUF hybrid adhesives, and their adhesion performances were evaluated for the surface lamination of fancy veneer on plywood. FT-IR spectra showed that the de-blocked -NCO groups reacted with the -OH of hydroxymethyl groups of the MUF resins to form urethane bonds at 2% B-pMDI/MUF, which was detected before and after their hydrolysis. The mass loss after the hydrolysis consistently decreased as the B-pMDI level increased, indicating an improvement in the water resistance. As the B-pMDI level increased, the activation energy of hybrid adhesives decreased, which improved the reactivity of the hybrid adhesives. Additionally, the water resistance improvement of the hybrid adhesives increased the tensile shear strength of the surface laminated plywood in semi-water proof and water-proof by 23 % and 8 %, respectively, at 2% B-pMDI level. This was likely due to the urethane linkages in the hybrid adhesives. However, the formaldehyde emission from plywood panels bonded with the hybrid adhesives increased in the dry state, indicating incomplete curing of the hybrid adhesives.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.568-568
• /
• 2003

I. Objectives This study investigated the effect of rewetting agent on dentinal microtensile bond strengths(${\mu}TBS$), using one bottle adhesives. II. Materials and Methods Non caries human molars were sectioned to exposed the superficial dentin surfaces, etched 15 seconds using 32% phosphoric acid and 10 seconds rinsed. Samples were randomly divided into two groups according to adhesives (Single Bond, One-Step) used. Each group were subdivided into five groups by different dentin surface treatment：15 second dry(D), blot dry(BD) or 15 second dry and rewetted with distrilled water(DW), Gluma Desensitizer(GD) and Aqua-Prep(AP) during 30 second, respectively.(omitted)

• 한국가구학회지
• /
• 제11권1호
• /
• pp.53-59
• /
• 2000

This study was to measure formaldehyde emission and bonding strength of plywoods manufactured with urea-melamine formaldehyde adhesives, which were made from three different mixing ratios of urea and melamine, and with four different formaldehyde/urea-melamine molar ratios of 1.0,1.1,1.2 and 1.4. The results were as follows 1. Amount of formaldehyde emission was the lowest at the first method of molar ratio(F/(M+U)) 1.0. Amounts of formaldehyde emission of experimental manufactured adhesives were lower than that of commercial adhesive. 2. Bonding strength of dry specimen was the highest at the first method of molar ratio(F/(M+U)) 1.4. Dry bonding strength of molar ratio(F/(M+U)) 1.4 was similar to commercial adhesive. 3. Bonding strength of wet specimen was the highest at the second method of molar ratio(F/(M+U)) 1.4. Bonding strength of wet specimen used by the third method of molar ratio(F/(M+U)) 1.4 was almost equal to commercial adhesive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1609-1610
• /
• 2011

• 대한기계학회논문집A
• /
• 제39권11호
• /
• pp.1099-1103
• /
• 2015

자연계에 존재하는 다양한 생명체 중 몇몇은 벽이나 천장을 자유자재로 걸어다닌다. 이러한 생명체 중 대표적으로 Gecko는 발가락 표피에 수십억개의 주걱모양의 나노헤어를 가지고 있으며, 이러한 구조로 인하여 높은 접착력을 가진다. 본 연구에서는, 도마뱀 발바닥 섬모와 같은 미세 마이크로 구조물에 금속코팅을 하여 접착특성을 향상시키는 것을 제안한다. 도마뱀 모방 인공섬모 구조물을 DRIE공법으로 준비된 몰드를 이용하여 PDMS로 제조하였다. 그리고, 인공섬모의 금속 코팅은 플라즈마 스퍼터링을 사용하여 수행하였다. 접착력과 내구성은 실험을 유리에 반복 접착 실험으로 평가 하였다. 접착성 및 내구성 실험을 통하여 인공섬모 구조물에 금속코팅이 미치는 영향에 대해 관찰하였다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.607-615
• /
• 2015

To investigate the adhesion effect of various kinds and contents of polymeric methylene diphenyl diisocyanates (pMDIs) on adhesion performance, wood adhesives (A-1~5) were synthesized and characterized. As results, when the amount of pMDI increased in adhesives, the dry tensile strength was found to be proportionally increased sustaining at around $16.0{\sim}21.6kgf/cm^2$. The polyurethane (PU) resin, which used M11S as a source of pMDI showed the best wet tensile strength at $11.9kgf/cm^2$ and cyclic boil tensile strength at $8.1kgf/cm^2$, which satisfied the requirement of over $7kgf/cm^2$. Thermal properties of the rice powder (RP) based polyurethane resins were characterized by differential scanning calorimetry (DSC) and Thermal gravimetric analysis (TGA). Thermal stability of polyurethane resins increased to $250^{\circ}C$ with adding pMDIs. The more pMDI (M5S) was added to adhesive, the higher thermal stability of the resin was observed by TGA.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.34-42
• /
• 2008

Generally, paper multilayering was performed before wet pressing process. However, sheets whose characteristics are different could be put together at the dry state by adhesives for the specialty paper products. In this paper, potential adhesives such as PVAc, oxidised starch, latex, and PVA were chosen and multilayering of several sheets was performed in laboratory scale. The effects of base paper properties and the composition of adhesives on the physical properties of multilayering paper were investigated. Physical properties such as bonding strength and stiffness were measured. For the practical reasons, mill trial was also executed. According to the result of laboratory tests and mill trial test, the physical properties of multilayered paper were greatly affected by the composition of adhesives and it was found that PVAc showed the best performance in all its aspects among four adhesives. Oxidised starch had an advantage of high stiffness and PVA gave high bonding strength to the multilayered paper. And it was also found that the properties of base paper showed the great influences not only on multilayering process, but also on the physical properties of the multilayered paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.449-449
• /
• 2011

We reported the direct effect of intrinsic surface energy of dry adhesive material to the Van der Waals and capillary forces contributions of the total adhesion force in an artificial gecko-inspired adhesion system. To mimic the gecko foot we fabricated tilted nanohairy structures using both lithography and ion beam treatment. The nanohairy structures were replicated from Si wafer mold using UV curable polymeric materials. The control of nanohairs slanting angles was based on the uniform linear argon ion irradiation to the nanohairy polymeric surface. The surface energy was studied utilizing subsequent conventional oxygen ion treatment on the nanohairy structures which resulted in gradient surface energy. Our shear adhesion test results were found in good agreement with the accepted Van der Waals and capillary forces theory in the gecko adhesion system. Surface energy would give a direct impact to the effective Hamaker constant in Van der Waals force and the filling angle (${\varphi}$) of water meniscus in capillary force contributions of gecko inspired adhesion system. With the increasing surface energy, the effective Hamaker constant also increased but the filling angle decreased, resulting in a competition between the two forces. Using a simple mathematical model, we compared our experimental results to show the quantitative contributions of Van der Waals and capillary forces in a single adhesion system on both hydrophobic and hydrophilic surfaces. We found that the Van der Waals force contributes about 82.75% and 89.97% to the total adhesion force on hydrophilic and hydrophobic test surfaces, respectively, while the remaining contribution was occupied by capillary force. We also showed that it is possible to design ultrahigh dry adhesive with adhesion strength of more than 10 times higher than apparent gecko adhesion force by controlling the surface energy and the slanting angle induced-contact line of dry adhesive the materials.