This study addresses the evaluation of the durability of reinforced concrete marine structures subjected to fatigue loading. The laboratory investigation was carried out on full and half size reinforced concrete specimens with three different water cement ratios (0.3, 0.4, and 0.56), static and fatigue loading conditions, and epoxy-coated and regular black steel reinforcements. The marine tidal zone was simulated by alternate filling and draining of the tank (wet and dry cycled), and a galvanostatic corrosion technique to accelerate corrosion of reinforcement was used. Half-cell potentials and changes of crack width were measured periodically during the exposure and followed by ultimate strength testing. The significant findings include adverse effect of fatigue loading, existence of an explicit size effect, poor performance of epoxy coated steel, and negative effect of increasing water/cement ratio.
아크플라즈마를 이용해 촉매입자를 촉매지지체에 건식으로 직접 분산하는 기술에 대한 개괄과 응용사례를 소개한다. 이 방법은 촉매입자를 담지하는 일반적인 방법인 습식법의 단점을 개선하고자 촉매입자를 기화하여 직접 담지체에 증착하는 방법이다. 아크플라즈마 증착을 이용해 제작한 촉매재료의 성능을 연구한 사례 세가지를 소개한다. 이 사례들을 통해 이 방법으로 증착되는 나노입자의 크기가 1~5 nm 정도이고 일반적으로 습식 방법보다 촉매성능면에서 우수한 성능을 나타낸다는 것을 보인다.
고온 건식공정의 사용후핵연료 산화분말 ($U_3O_8$)과 경 중수로 연계 핵연료 제조공정의 $UO_2$ 소결체 물성 이해에 필요한 Oxygen/Metal 비를 습식 및 건식 분석방법으로 측정하였다. $UO_2$ 분말에 핵분열생성물 원소의 산화물을 일정량 첨가하고 $1,700^{\circ}C$의 수소분위기에서 소결시켜 20,000~60,000 MWd/MtU 연소도 범위의 사용후핵연료와 화학조성이 유사한 모의 사용후핵연료를 제조하였다. 습식법에 의한 O/M 비 측정을 위하여 혼합산 (10 M HCl : 8 M $HNO_3$, 2.5:1 V/V)에 의한 가압산분해법으로 모의 사용후핵연료를 용해하고 우라늄과 핵분열생성물 원소를 추출 크로마토그래피로 분리한 후 금속원소의 총량을 유도결합플라스마 원자방출분광분석법으로 결정하였다. 또한 $UO_2$가 산화될 때의 무게변화를 열중량 무게분석법 (thermogravimetric)으로 측정하여 O/M비를 계산하고 습식법으로 얻은 결과와 비교하였다. $Mo_{0.4}-Ru_{0.4}-Rh_{0.1}-Pd_{0.1}$ 합금이 O/M비 측정에 미치는 영향을 조사하였다.
In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.
치질에 대한 접착수복은 건전한 치질을 보존하면서 유지력을 증가시킬 뿐 아니라 치질과 수복물 계면에서의 미세누출을 방지할 수 있다는 측면에서 임상에서 그 사용빈도가 높아지고 있다. 그러나 복합레진충전후 중합과정에서의 수축현상이 여전히 해결되지 않는 문제로 남아 있으며 이로 인한 변연누출은 술후 지각과민, 변연변색이나 이차우식과 아울러 치수병변의 유발인자로 작용할 수 있다. 치질과 레진수복물간의 접착강도를 강화시킴으로써 변연부위의 누출현상을 극복할 수 있다는 인식 하에 많은 종류의 상아질 접착제에 대한 접착강도 검사와 미세누출 검사가 행해졌으나 접착강도와 변연누출간의 관계에 대한 직접적인 연구는 미흡한 상태이다. 본 연구에서는 우치를 이용한 동일시편에서 접착강도와 미세누출의 정도를 측정 후 상호관계를 알아보고자 하였다. 소의 하악 전치를 이용하여 법랑질 또는 상아질 시편을 각 군마다 30개씩 준비하였다. 32% 인산으로 15초 처리 및 20초 수세 후 치질처리 방법에 따라 법랑질/완전 건조시킨 군, 법랑질/습윤상태의 군, 상아질/완전 건조시킨 군, 상아질/습윤상태의 군으로 나누었다. 각 군의 시편을 One-Step$^{TM}$ adhesive를 적용 후 Charisma 복합레진으로 충전하였다. 그 후 2% methylene blue에 1주일 간 침잠시킨 후 24시간 흐르는 물에 수세한 뒤 인장접착 강도를 측정하였다. 인장 접착 강도 측정 후 컴퓨터 프로그램 상에서 색소의 침투 면적을 계산하였으며 그 결과는 다음과 같이 나타났다. 1. 법랑질 및 상아질 군 공히, 접착강도와 미세누출을 비교시 유의한 음의 상관관계를 나타내어 접착강도가 높을수록 미세변연누출은 적게 나타내는 경향을 나타내었다 (r=-0.50, p<0.05). 2 법랑질 군 및 상아질 군 공히, 습윤상태의 시편이 완전히 건조된 시편에 비해 높은 집착강도를 나타내었다 (p<0.05). 3. 상아질에서는 습윤상태의 군이 건조시킨 군 사이에 유의하게 적은 미세변연 누출을 나타낸 반면(p<0.05), 법랑질에서는 습윤상태의 군과 건조시킨 군 사이에 미세변연 누출에 있어 유의한 차이가 나타나지 않았다 (p>0.05).
The objective of this study was to analyze the factors affecting on fuel consumption of agricultural tractor. According to the statistical analysis, fuel consumption of agricultural tractor was considerably influenced by kind of operation, throttle engine speed and gear steps of tractor but much less by kind of soil. Specific fuel consumption of the tractor in plowing, dry paddy tilling, wet paddy tilling and wet paddy levelling was 0.33~0.36, 0.30~0.45, 0.19~0.34, 0.28~0.39 L/$kW{\cdot}h$, respectively, and $CO_2$ emission was 0.36~0.45, 0.35~0.58, 0.22~0.42, 0.24~0.37 kg/$kW{\cdot}h$, respectively. Specific fuel consumption and $CO_2$ emission increased as throttle engine speed increased but reversely proportional with gear step of tractor, by which one can reduce fuel consumption and $CO_2$ emission with practicing of "Gear up & Throttle Down" technique in paddy operations.
목제, 칠기, 초본류 등 출토 유기물은 매장환경에서 수분을 함유한 수침상태로 발굴된다. 이러한 유물은 수침상태 그대로 보관하지 않는 경우 수분이 장기간 서서히 증발되어 건조상태가 된다. 수침칠기 목질부는 부후되어 외형의 칠만 남았고, 초본류는 토양에 고착된 상태가 대부분이다. 본 처리에서는 철기시대 유물인 창원 다호리 출토 칠기와 초본류를 밀납, 레이온지를 사용하여 배접기법을 응용한 보존처리하였다. 그 결과 토양이 고착된 유기물에서 토양을 제거하고 칠과 초본류만을 보존처리하는 것이 가능하였다.
가야산 국립공원과 홍류동 및 치인지구의 삼림군집을 대상으로 ordination 및 classification의 정량적 분석기법을 사용하여 식물군집구조를 밝히고 천이계열을 추정하기 위하여 40개의 조사구(1조사구당 500$m^2$)를 설치하였다. TWINSPAN에 의한 Classification분석에서 최종적으로 8개의 군집으로 분리되었고, 건조형군집은 소나무 및 잣나무가 우점종이었으며, 습윤형은 졸참나무, 신갈나무, 서어나무, 까치박달나무가 우점종이었다. 습윤형은 다시 표고에 의해 구분할 수 있었으며 낮은 표고에서의 군집은 졸참나무가, 높은 표고에서의 군집은 신갈나무가 우점종이었다. DCA에 의한 ordination결과는 제1축에서 소나무가 우점종인 군집과 졸참나무, 신갈나무, 서어나무, 까치박달나무가 우점종인 군집으로 분리되었고, TWINSPAN의 제1 division의 결과와 거의 일치하였다. DCA의 제1축과 토양수분, 토양산도, 표고, 최대종다양도, Shannon의 종다양도지수와는 고도의 부의 상관관계를 나타냈다. 유사도지수는 각군집간에 매우 낮은 값이었으며, 각 군집의 종다양성분석에서는 각 군집의 우점종에 따라 큰 차이가 있었다. 개체수와 종수와의 관계는 개체수가 증가할 수록 종수는 감소하였으며, 개체수가 증가할 수록 종다양성지수는 감소하였다.
Journal of Korean Society for Atmospheric Environment
/
제18권E1호
/
pp.1-12
/
2002
One technique for determining dry acid deposition fluxes involves measurement of time - averaged ambient concentrations of dry acid deposition species using filter packs (FP) coupled with estimates of mean deposition velocities for the exposure period. A critical problem associated with filter pack data comparisons between various field sampling networks is the use of diverse sampling flow rates and duration protocols. Field experiments were conducted to evaluate the effects of varying sampling flow rates, from 1.5 to 10 standard liters per minute, on total nitrate and sulfate measurements of specific dry acid deposition species . Collocated FP samplers were used to determine sampling and analysis data reproducibility and representativeness . Ambient air samples were simultaneously collected using groups of filter packs operated at various flow rates over identical 7 day periods. The species measured were sulfur dioxide, particulate sulfate , nitric acid and particulate nitrate. Statistical results (ANOVA; alpha level 5%) showed that neither the low nor high sampling flow rates caused a significant difference in the measurements of total sulfate and adjusted total nitrate (ATN) . However, it was concluded that for high flow rate sampling measurements, total nitrate (TN) could be affected during extended sampling durations because of potential nitric acid overloading and breakthrough. Although the previous workers (Costello, 1990; Quillian, 1990) used much higher sampling flow rates (~ 17 sLpm) than employed here, it was assumed that for a high loading (> 50$\mu\textrm{g}$ HNO$_3$) of nitric acid on the Nylon filters, a significant fraction (~10%) of nitric acid could pass through the Nylon filters and be collected on the carbonate impregnated filters. It was concluded that even at the highest sampling flow rate employed (10 sLpm) at the Cary Forest site, nitric acid breakthrough was less than 10% of the total HNO$_3$ collected. However, for a heavily polluted urban airshed or with longer sampling times , higher filter loadings could result in substantial nitric acid breakthrough and HNO$_3$concentrations would be underestimated.
As people have gained leisure time and become more interested in sports, various industries catering to these sports, including aquatic and underwater activities are growing. Many people are getting into scuba diving, where people can explore the sea at depths of more than 40-meters. Despite the increasing demand, there are limited studies on the sport. This study aims to provide basic research on materials suitable for developing technical scuba diving suits by analyzing several areas, such as design, material, sewing patterns, etc. The following trends were observed in all wetsuits: closure designs, ergonomic patterns, practical and functional details. Neoprene was the primary material of diving suits, and various functional materials were attached to the outer fabric or lining. The seam technique which minimized water contact and improved durability was sewing. Various techniques were also applied, such as flatlock stitching, GBS, LFS, etc. Subsequent studies shall investigate consumer preference etc. and other aspects, and continue to allow for the research and development of technical diving suits.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.