• Computers and Concrete
• /
• 제12권1호
• /
• pp.37-51
• /
• 2013

The responses of reinforced concrete slabs subject to an impact loading near the ultimate load range are explored. The analysis is carried out on a simply supported rectangular reinforced concrete slab using a nonlinear explicit dynamic procedure and considering three material models: Drucker-Prager, modified Drucker-Prager, and concrete damaged plasticity, available in the commercial finite element software, ABAQUS/Explicit. For comparison purposes, the impact force-time response, steel reinforcement failure, and concrete perforation pattern are verified against the existing experimental results. Also, the effectiveness of mesh density and damage wave propagation are studied independently. It is shown that the presently adopted finite element procedure is able to simulate and predict fairly accurate the behavior of reinforced concrete slab under impact load. More detailed investigations are however demanded for the justification of effects coming from an imperfect projectile orientation as well as the load and structural surface conditions, including the impulsive contacted state, which are inevitable in an actual impact environment.

• 소성∙가공
• /
• 제16권4호
• /
• pp.234-238
• /
• 2007

Magnesium alloy sheets in room temperature have unusual mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening behavior. In this paper, the continuum plasticity models considering the plastic behavior of AZ31B Mg alloy sheet were derived. A new hardening law based on modified two-surface model was developed to consider the general stress-strain response of metals including Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. To include the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified by adding anisotropic constants.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1242-1248
• /
• 2006

Densification behavior of nanocrystalline titania powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. Lee and Kim proposed the Cap model by developing the parameters involved in the yield function of general Cap model and volumetric strain evolution under cold isostatic pressing. The parameters in the Drucker/Prager Cap model and the proposed model were obtained from experimental data under triaxial compression. Finite element results from the models were compared with experimental data for densification behavior of nanocystalline ceramic powder under cold isostatic pressing and die compaction. The proposed model agreed well with experimental data under cold compaction, but the Drucker/Prager Cap model underestimated at the low density range. Finite element results, also, show the relative density distribution of nanocystalline ceramic powder compacts is severe compared to conventional micron powder compacts with the same averaged relative density.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.247-248
• /
• 2009

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.121-128
• /
• 2020

본 논문에서는 고속열차-차륜-레일-지반부의 상호작용에 따른 지반부의 변위장과 가속도장의 분포양상을 연구하고자 하였다. 이를 위해 고속열차 주행을 실제 차륜으로 모형하여 차륜-레일간의 연직접촉과 사행동에 의한 횡접촉을 모사하고, 이동질량해석을 근간으로 하였다. 이 때 지반부는 Modified Drucker-Prager 모델을 이용하여 상면 지반부의 비선형 거동을 부여하고 이에 따른 변위, 가속도의 변화를 탄성지반의 거동과 비탄성지반의 거동을 상호 비교하였다. 이를 통해, 실제 지반거동과 가까운 변위와 가속도 범위를 예측하고자 하였다. 이 때 지반부의 von-Mises응력과 등가소성변형도를 검토하고, 각 파괴면에서의 등가소성변형도, 전체 체적변형도 등을 검토하였다. 이동질량을 이용한 차륜-레일 접촉부의 수직응력, 횡압, 종방향 구속압 등의 시간이력에 따른 응력변화도 검토하였다. 비선형 지반모델의 경우 탄성 지반모델에 비해 열차 주행에 따른 변위 차이는 크지 않는 반면에 가속도의 경우는 큰 감소를 발생시키는 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.298-301
• /
• 2007

Magnesium alloy sheets have unique mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening response. The unusual mechanical behavior of magnesium alloys has been understood by the limited symmetry crystal structure of HCP metals or by deformation twinning. In the present study, the continuum plasticity models considering the unusual plastic behavior of magnesium alloy sheet were derived for a finite element analysis. A new hardening law based on two-surface model was developed to consider the general stress-strain response of metal sheets such as Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. In terms of the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified to include the anisotropy of magnesium alloys.

• 한국전산구조공학회논문집
• /
• 제22권3호
• /
• pp.199-209
• /
• 2009

본 논문은 단조하중을 받는 초고강도 섬유보강 콘크리트 I형보의 파괴거동에 대한 3차원 유한요소해석을 수행하였다. 보통 또는 고강도 콘크리트의 구성방정식과 달리 초고강도 섬유보강 콘크리트의 재료적 특성을 나타내기 위해 인장변형률 경화관계를 고려한 탄소성 파괴역학 모델을 제안하였다. 인장영역에서는 인장경화 변형률을 고려한 다차원적 균열기준을 정의하였고, 압축영역에서는 associated flow rule을 고려한 Drucker-Prager기준을 채택하여 해석을 수행하였다. UHPFRCI형보의 지간, 프리스트레스 하중 및 단면의 영향에 관한 수치해석 결과를 실험 거동와 비교한 결과 정확한 해석 결과를 보여주었다.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.42-50
• /
• 2006

In this paper, elasto-plastic constitutive equations for highly anisotropic and asymmetric materials are developed and their numerical implementation is presented. Some engineering materials such as fiber reinforced composites show different material behavior in the different material directions (anisotropy) as well as in tension and compression (asymmetry). Although these materials have mostly been analyzed using the anisotropic elastic constitutive equations, the necessity of consideration of plastic properties has been frequently reported in the previous works. In order to include both the anisotropic and asymmetric properties of composite materials, the Drucker-Prager yield criterion is modified by adding anisotropic parameters and initial components of translation. The implementation procedure for the developed theory and algorithms is presented based on the implicit finite element scheme. The measured data from the previous work are used to validate the present constitutive equations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.543-550
• /
• 2000

Rock slopes along the road or railroad are affected by temperature and therefore experienced iterative freezing-thawing process between winter and early spring. The purpose of this study is to analyze the stability of rock slopes which are influenced by the deterioration due to the freezing-thawing. The analysis is the homogenization method which evaluates the strength property of discontinuous rock mass, and as a strength failure criterion, Drucker-Prager failure criterion is used. The deterioration property of real rock is obtained by a freezing-thawing laboratory test of tuff and this property of deterioration is quantitated and used as a basic data of stability analysis for rock mass. To evaluate the deterioration depth due to the freezing-thawing in situ rock slope, one dimensional heat conductivity equation is used and as the result I can find that the depth of which is affected by a temperature. After the freezing-thawing depth of model slope is determined, we analyze the pattern of rock mass stength value of rock slope model which excesses the limit of self-load.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.225-233
• /
• 2004

본 연구에서는 응답면기법을 이용하여 격납건물의 내진안전성 평가를 하였다. ABAQUS를 이용하여 하중, 저항과 해석에서의 랜덤변수를 고려한 구조해석을 수행하였고 이로부터 변수의 다항식으로 표현되는 구조물의 응답을 얻었다. 그리고 Level II에 의해 신뢰성해석을 하였다. 한계상태함수로는 콘크리트의 2축응력 상태를 고려하기 위해 Drucker-Prager 파괴기준을 이용하였다. 구조물의 수명, 지진의 연발생율과 조건부 파괴확률을 고려하여 격납건물의 파괴확률을 계산하였다. 또한 응답면기법의 안정적인 결과를 얻기 위해 표본점 선정에 대한 민감도해석을 수행하였다.