• 전기화학회지
• /
• 제1권1호
• /
• pp.8-13
• /
• 1998

This work presents the way how to evaluate the degree of reversibility of the discharging process undergone by the nickel hydroxide film cathodically deposited on pure nickel as a positive electrode for electrochemical capacitor using the combined cyclic voltammetry and potential drop method, supplemented by galvanostatic discharge and open-circuit potential transient methods. The time interval necessary just to establish the current reversal of anodic to cathodic direction from the moment just after applying the potential inversion of anodic to cathodic direction, was obtained on cyclic voltammogram. The cathodic charge density passed upon dropping the applied potential, was calculated on potentiostatic current density-time curve. Both the time interval and the cathodic charge density in magnitude can be regarded as being measures of the degree of reversibility of the discharging process undergone by the positive active material for supercapacitor, i.e. , the longer the time interval is, the lower is the degree of reversibility and the greater the cathodic charge density is, the higher is the degree of reversibility. From the applied potential dependences of the time interval and cathodic charge density, discharge at $0.42 V_{SCE}$ was determined to be the most reversible.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.9-9
• /
• 2010

The proton exchange membrane fuel cell (PEMFC) holds great promise of clean power. However, in practical applications which use the PEMFC as the power source, the output voltage from the fuel cell undergoes transient response especially during acceleration and deceleration. This paper presents the relationships between the internal voltage drop, voltage of time constant, time constant of FC1 and FC2 (in series and in parallel) charge curves and discharge curves respectively.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.331-337
• /
• 2015

The power flow analysis of electrified railway is required complicated calculation, because of variable load. Train runs trough rail supplied by electric power therefore, the load value in electrified railway system fluctuates along time. The power flow algorithm in electrified railway system is different from general power system, and the power flow simulation is peformed by the particular simulation software. Powerail is simulation software for analysis of traction power supply system developed by KRRI, in 2008. This consists of load forecasting module, including TPS and time scheduling, and power flow module. This software was verified by measured current under normal feeding condition, however, has not been verified by voltage on the condition of extended feeding. This paper presents the verification of PowerRail based on voltage drop under extended feeding condition. This is performed by comparing simulation result with field test. Field test and simulation is done in commercial railway line.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.116-121
• /
• 2002

For the accumulation of a fundamental knowledge about the behavior of glass solder during the joining of ceramics, the wettability of solder on silicon nitride have been measured by sessile drop method. $SiO_2-MgO-Al_2O_3$ g1ass solder and oxynitride glass solders were selected as examples while silicon nitride which were used as substrates. Contact angle of solder on silicon nitride didn't decrease with time at high nitrogen content in the solder, but low nitrogen content in solders have the time-dependent property. Reason which contact angle of low nitrogen content in solders decrease on silicon nitride was that diffusion of nitrogen take place between solder and silicon nitride.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.260-264
• /
• 2003

네트워크의 성능 향상에 영향을 미치는 여러 요소 중에서, 본 연구에서는 NIC(Network Interface Card) 버퍼 사이즈(Buffer Size)가 웹 서버와 LAN(Local Area Netwok)에 어떤 영향을 미치는지를 분석하였다. 버퍼 사이즈의 조절을 통해서 내부 네트워크의 패킷 분실율, 처리량, RTT(Round Trip Time), 수신율의 변화를 NS-2를 사용하여 시뮬레이션 해보고 그 결과를 비교하여 이더넷(Ethernet)에서의 웹 트래픽에 미치는 영향을 분석하였다.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3334-3341
• /
• 2023

We studied the irradiation effects of fast neutron generated by a 30 MeV cyclotron on the electrical and switching characteristics of NPT-IGBT devices. Fast neutron fluence ranges from 2.7 × 10⁹ to 1.82 × 10¹³ n/cm². Electrical characteristics of the IGBT device such as I-V, forward voltage drop and additionally switching characteristics of turn-on and -off were measured. As the neutron fluence increased, the device's threshold voltage decreased, the forward voltage drop increased significantly, and the turn-on and turn-off time became faster. In particular, the delay time of turn-on switching was improved by about 35% to a maximum of about 39.68 ns, and that of turn-off switching was also reduced by about 40%-84.89 ns, showing a faster switching.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.24-30
• /
• 2009

본 연구에서는 고분자 비이온 계면활성제 Pluronic L64($EO_{13}PO_{30}EO_{13}$) 마이셀에 의한 n-decane, n-undecane, n-dodecane의 가용화 실험을 수행하였다. Oil drop contacting 실험을 이용하여 탄화수소 오일을 계면활성제 마이셀 용액에 주입한 후 시간에 따른 탄화수소 오일의 크기를 측정하여 가용화 속도를 결정하였다. 가용화 속도는 초기 오일 drop의 크기에 상관없이 일정하게 나타났으며, 탄화수소 오일의 탄소수(alkane carbon number, ACN)가 증가함에 따라 감소하고 계면활성제 농도에 따라 거의 선형적으로 증가함을 알 수 있었다. 이러한 결과로부터 Pluronic L64 마이셀에 의한 n-decane, n-undecane, n-dodecane의 가용화는 diffusion-controlled 메커니즘이 아니라 interface-controlled 메커니즘을 따르는 것을 확인할 수 있었다. 또한 turbidimeter를 이용하여 측정한 가용화도(equilibrium solubilization capacity, ESC)는 ACN에 따라 감소하나, 계면활성제 농도와 가용화 속도 증가에 따라 모두 증가하였다. Spinning drop tensiometer를 이용하여 dynamic interfacial tension을 측정한 결과, ACN이 증가함에 따라 평형에 도달하는 데 걸리는 시간과 평형에서의 장력 값이 모두 증가하였으나 계면활성제 농도에 따라서는 감소하였다.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1065-1074
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the chaotic feature extraction for ultrasonic pattern recognition. Features extracted from time series data using the chaotic time series signal analysis quantitatively welding defects. For this purpose analysis objective in this study is fractal dimension and Lyapunov exponent. Trajectory changes in the strange attractor indicated that even same type of defects carried substantial difference in chaoticity resulting from distance shills such as 0.5 and 1.0 skip distance. Such differences in chaoticity enables the evaluation of unique features of defects in the weld zone. In experiment fractal(correlation) dimension and Lyapunov exponent extracted from 6dB ultrasonic defect signals of weld zone showed chaoticity. In quantitative chaotic feature extraction, feature values(mean values) of 4.2690 and 0.0907 in the case of porosity and 4.2432 and 0.0888 in the case of incomplete penetration were proposed on the basis of fractal dimension and Lyapunov exponent. Proposed chaotic feature extraction in this study enhances ultrasonic pattern recognition results from defect signals of weld zone such as vertical hole.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권5호
• /
• pp.269-277
• /
• 1999

In this paper, a novel dead time minimization algorithm is proposed for improving the output waveform of an inverter. The adverse effects of the dead time are mainly described by the voltage drop and the distortion factor of waveforms. The principle of the proposed algorithm is organized with forbidding unnecessary firings fo the inverter switches which are not conducted even though the gate signal is impressed. The proposed methods are explained with the conduction mode of output currents. The H/W and S/W implementation method of the proposed algorithm are also presented. The validity of the proposed algorithm is verified by comparing the simulation and experimental results with conventional methods. It can be concluded from the results that the proposed algorithm has the advantage which is able to reduce the harmonics in the output voltages and which the output voltage can nearly be equal to the reference value. Another advantage of the proposed method is the reduction of total numbers of switching so that the switching losses of inverter drives can be minimized.

• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.153-163
• /
• 2023

Two types of accelerated tests, Water Drop Test (WDT) and Temperature-Humidity-Bias Test (THBT), can be used to evaluate the susceptibility to electrochemical migration (ECM). In the WDT, liquid water is directly applied to a specimen, typically a patterned conductor like a printed circuit board. Time to failure in the WDT typically ranges from several seconds to several minutes. On the other hand, the THBT is conducted under elevated temperature and humidity conditions, allowing for assessment of design and life cycle factors on ECM. THBT is widely recognized as a more suitable method for reliability testing than WDT. In both test methods, localized corrosion can be observed on the anode. Composition of dendrites formed during the WDT is similar to that formed during THBT. However, there is a lack of correlation between the time to failure obtained from WDT and that obtained from THBT. In this study, we investigated the relationship between electrochemical parameters and time to failure obtained from both WDT and THBT. Differences in time to failure can be attributed to actual anode potential obtained in the two tests.