• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.320-323
• /
• 2008

In this study the effect of collision model was evaluated in spray field by CFD. A collision is basically the interaction between droplets and criteria of collision is determined by drop Weber number, impact parameter, and drop-size ratio. Early developed collision model considered coalescence and grazing collision with the exchange of momentum. However in experimental research there were bouncing, coalescence, reflexive separating and stretching separating in interaction between droplets. In this study the collision considering such complex phenomena is modeled and was compared with the basic collision model.

• 대기
• /
• 제22권1호
• /
• pp.73-85
• /
• 2012

The collision efficiency data for collision between graupel or hail particles and cloud drops that take into account the differences of particle density are applied to the Takahashi cloud model. The original setting assumes that graupel or hail collision efficiency is the same as that of the cloud drops of the same volume. The Takahashi cloud model is run with the new collision efficiency data and the results are compared with those with the original. As an initial condition, a thermodynamic profile that can initiate strong convection is provided. Three different CCN concentration values and therefore three initial cloud drop spectra are prescribed that represent maritime (CCN concentration = 300 $cm^{-3}$), continental (1000 $cm^{-3}$) and extreme continental (5000 $cm^{-3}$) air masses to examine the aerosol effects on cloud and precipitation development. Increase of CCN concentration causes cloud drop sizes to decrease and cloud drop concentrations to increase. However, the concentration of ice particles decreases with the increase of CCN concentration because small drops are difficult to freeze. These general trends are well captured by both model runs (one with the new collision efficiency data and the other with the original) but there are significant differences: with the new data, the development of cloud and raindrop formation are delayed by (1) decrease of ice collision efficiency, (2) decrease of latent heat from riming process and (3) decrease of ice crystals generated by ice multiplication. These results indicate that the model run with the original collision efficiency data overestimates precipitation rates.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.609-616
• /
• 2011

콘크리트와 철근의 재료모델 그리고 스톡앵커의 낙하거리 변화에 따른 아치형 해저 케이블 보호구조물의 충돌특성을 분석하였다. 콘크리트의 재료모델로는 plastic kinematic모델과 Johnson-Holmquist Concrete모델이, 철근의 재료모델은 선형탄성모델과 plastic kinematic모델이 고려되었다. 스톡앵커의 무게는 2ton이며 낙하거리는 3, 5, 8.83m로 선정되었다. 충돌해석을 위해 유한요소해석 프로그램 ANSYS가 사용되었고, 해석시간 단축을 위해 낙하거리를 초기속도로 변화하는 기법을 사용하였다. 낙하거리 변화에 따른 재료모델의 민감성을 분석한 결과, 콘크리트의 충돌응답은 콘크리트모델에 민감하고 철근의 충돌응답은 일차적으로 철근모델에 이차적으로 콘크리트모델에 민감함을 알 수 있었다.

• Smart Structures and Systems
• /
• 제15권2호
• /
• pp.299-314
• /
• 2015

Submersed rock-berm structures are frequently used for protection of underwater lifelines such as pipelines and power cables. During the service life, the rock-berm structure can experience several accidental loads such as anchor collision. The consequences can be severe with a certain level of frequency; hence, the structural responses should be carefully understood for implementing a proper structural health monitoring method. However, no study has been made to quantify the structural responses because it is hard to deal with the individual behavior of each rock. Therefore, this study presents a collision analysis of the submersed rock-berm structure using a finite element software package by facilitating the smoothed-particle hydrodynamics (SPH) method. The analysis results were compared with those obtained from the Lagrange method. Moreover, two types of anchors (stock anchor and stockless anchor), three collision points and two different drop velocities (terminal velocity of each anchor and 5 m/s) were selected to investigate the changes in the responses. Finally, the effect of these parameters (analysis method, anchor type, collision point and drop velocity) on the analysis results was studied. Accordingly, the effectiveness of the SPH method is verified, a safe rock-berm height (over 1 m) is proposed, and a gauge point (0.5 m above the seabed) is suggested for a structural health monitoring implementation.

• International Journal of Aerospace System Engineering
• /
• 제3권2호
• /
• pp.22-25
• /
• 2016

This dissertation tried to analyze passenger behaviors after an accident with the possibilities of a variety of accidents open reflecting the phases of the times of increasing interests in safety of passengers as the use of means of transportation such as cars and airplanes is increasing. Because a lot of data on head-on collisions, broadside collisions and reverse side collisions have been gathered through lots of experiments and interpretations, I chose to study a relatively unfamiliar subject, dropping collision. For example, I tried to study passenger behaviors in seating position after a dropping collision in preparation for falling accidents due to recent frequently-occurring sinkholes, driver's carelessness or mechanical problems. I used MADYMO, passenger behavior interpretation program, and experimented with 2 meters high Drop Test device which I made in person to increase the reliability of the results. On the basis of these, I compared the real experiments with interpretations.

• 한국해양공학회지
• /
• 제38권3호
• /
• pp.124-136
• /
• 2024

As the number of offshore wind-power installations increases, collision accidents with vessels occur more frequently. This study investigates the risk of collision damage with operating vessels that may occur during the operation of an offshore wind turbine. The floater used in the collision study is a 15 MW UMaine VolturnUS-S (semi-submersible type), and the colliding ships are selected as multi-purpose vessels, service operation vessels, or anchor-handling tug ships based on their operational purpose. Collision analysis is performed using ABAQUS and substantiation is performed via a drop impact test. The collision analyses are conducted by varying the ship velocity, displacement, collision angle, and ship shape. By applying this numerical model, the extent of damage and deformation of the collision area is confirmed. The analysis results show that a vessel with a bulbous bow can cause flooding, depending on the collision conditions. For damage caused by collision, various collision angles must be considered based on the internal stiffener arrangement. Additionally, the floater can be flooded with relatively small collision energy when the colliding vessel has a bulbous bow.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.559-564
• /
• 2008

A prediction of binary droplets collision is important in the formation of falling drops and the evolution of sprays. The droplet velocity, impact parameter and drop-size ratio have influence on the interaction of the droplets. By the effect of these parameter, the collision processes are generated with the complicated phenomena. The droplet collision can be classified into four interactions such as the bouncing, coalescence, reflexive separation and stretching separation. In this study, the two-phase flow of the droplet collision was simulated numerically by using the Level Set method. 2D axi-symmetric simulations on the head-on collisions in the coalescence and reflexive separation, and 3D simulation on the off-center collisions in the coalescence and stretching separation were performed. These numerical results showed good agreements with the experimental and analytical results. For tracking the identity of droplets after the collision, transport equation for the volume fraction of the each initial droplet were used. From this, the identities of droplets were analyzed on the collision of droplets having different size.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.66-74
• /
• 2011

The SCR catalyst in coal-fired power plant is eroded by the collision of fly ash on the catalyst surface. However the erosion of SCR catalyst by the collision of fly ash has not been fully studied, especially in terms of fluid dynamics. Hence, in the present study, we focus on the gas and solid flows inside the SCR catalyst duct and their consequent effect on the erosion characteristics. For this purpose, computational fluid dynamics is applied to investigate the two-phase flows and to evaluate the erosion rate for different flow and particle injection conditions. Also, the erosion rate and pressure drop of commonly used square shape are compared with equilateral triangle and hexagon shapes. The pressure drop of SCR catalyst is increased when SCR catalyst surface area per unit volume increases. The erosion rate of SCR catalyst is enhanced when the particle velocity, mass flow rate of particle, particle diameter and cell density of SCR catalyst are increased. From the results, the pressure drop and erosion rate at the catalyst surface can be minimized by reducing cell density of SCR catalyst to decrease particle velocity and number of particle impacts.

• 전산구조공학
• /
• 제21권1호
• /
• pp.21-30
• /
• 2008

• 한국전산구조공학회논문집
• /
• 제26권5호
• /
• pp.359-371
• /
• 2013

본 논문은 두 편으로 구성된 사고로 지면에 추락낙하 충돌하는 고준위폐기물 처분용기에 대한 기구동역학 해석 논문 중 첫 번째 논문으로 기구동역학 해석에 대한 일반 이론연구를 수행하였다. 이를 통하여 고준위폐기물 처분용기의 구조 안전성 설계에 요구되는 처분용기 처분 시 사고로 추락낙하 하여 지면과 충돌하는 경우 처분용기에 가해지는 충격력을 이론적으로 구하고자 하였다. 이론 연구의 주된 내용은 다물체 동역학의 운동방정식에 관한 것이며 이를 토대로 다물체간 충돌 시 발생하는 충격력을 구하는 문제를 이론적으로 다루었다. 이렇게 이론적으로 구한 충격력을 처분장에서 처분용기 운송 시 운반차량에서 사고로 추락낙하 하여 지면과 충돌하는 처분용기에 발생하는 충격력을 구하는 문제에의 적용을 검토하였다.