• 대한한의학방제학회지
• /
• 제6권1호
• /
• pp.141-156
• /
• 1998

This histological study was performed to investigate the effects of .Paljeungsan-gagambang on the epididymal fat cell size, number and the fat drop area of hepatic lobule of rats fed High Fat Diet. Paljeungsan-gagambang was orally administered to the rats of sample group 26mg per 200g of rat's weight everyday for 4 weeks, and the control group were just fed with equal amount of saline solution. Then they are the epididymal fat cell size, epididymal fat cell numberand fat drop area of hepatic lobule that were measured. The results were summarized as follows; 1. The size of the epididymal fat cell was decreased significantly as compared with the control group. 2. The number of the epididymal fat cells was decreased significantly as compared with the control group in distribution chart classified by cell size 3. The Area(%) of the Fat drops in the hepatic lobule was decreased significantly as compared with the control group. According to the above results, it is considered that Paljeungsan-gagambang have effects on the decrease of the epididymal fat cell size, number and fat drop area of hepatic lobule of rats fed high fat diet; Thus, the adminisrtation of Paljeungsan-gagambang is considered to have an improving effect on obesities and liver diseases caused by high fat diet.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.18-31
• /
• 2005

This study was performed to explore the liquid breakup and atomization characteristics for the classification of drop formation mode and background of uniform droplets generation in electrohydrodynmaic atomization according to the change of experimental parameters such as nozzle material (stainless steel. teflon). fluid flow rate, applied electrical field and intensity, and frequency. In results, from the classification map of drop formation modes according to the variation of applied AC voltage and frequency at a stainless nozzle, the droplet size was smaller than the outer diameter of the nozzle tip relatively in the spindle mode. The transition points became clearly to be moved toward the high applied voltage by rising the applied AC frequency beyond 450Hz. Also the droplet radius can be observed quite small in the frequency bandwidth of $350{\sim}450Hz$. The droplet radiuses decrease as the applied voltage increases for a fixed applied AC frequency within the range from 50Hz to 400Hz Over 400Hz, the relation between the power intensity and the droplet size was not consistent with a continuous mechanism of liquid breakup. Thus, it is showed that the droplet size distribution using the teflon nozzle was analogous to the results of stainless steel, but the droplet size was bigger than that of stainless steel relatively in case of a teflon nozzle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.904-911
• /
• 2001

The fuels of water-in-oil emulsion have a potential of reducing PM(Particulate Matter) and NOx emissions, and increasing combustion efficiency in the furnaces and the burners. For making the most of the beneficial of the secondary atomization due to the microexplosion, the water droplets distributed in the oil must have the optimal sizes. The purpose of this paper is to investigate the water droplet size distribution characteristics of the different types of the static mixers. For analysis the size distribution characteristics efficiently, image analysis system wes constructed and an appropriate image processing algorithm was developed. Two kinds of static mixers: Kenics type and RF type, were tested. As a results, RF type static mixer shows a better characteristics in the mean drop size, particularly in the condition of high water content.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.132-139
• /
• 1997

Spray characteristics of external mixing sonic twin-fluid atomization nozzles are investigated experimentally. Particle sizes are measured by the Fraunhofer diffraction method using the Malvern particle analyzer, and their radial distributions are obtained using the tomographical transformation technique. The spatial distribution of SMD shows that the drop size increases in the radial direction at a fixed liquid flow rate, and the distribution is getting uniform rapidly as the atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR. It is found that the atomization efficiency of the flush type sonic nozzle is superior to that of protrusion type. The effect of laser beam diameter of the particle analyzer on the spatial SMD distribution is minor at present experimental conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.73-75
• /
• 2004

This paper presents the ability and the application of software packages for distribution planning which are DISPLAN(Distribution Planning System) and DLPLAN(Distribution Line Planning System) developed in KEPCO. After calculating size and position of maximum load by administration section for distribution, it forecasts the demand of distribution load considering growth location, increment, new load plan, etc of load by annual. Also it calculates distribution loss, voltage drop using modeled distribution line by you, and support for establishment and enlargement plan of substation and distribution line, decision of most optimal path. And it presents the abstract of used algorithm to develop this system.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.759-765
• /
• 2013

동축형 전단 분사기의 액적분포 균일도 및 혼합성능을 개선하기 위해 고안한 액체로켓 엔진용 동축형 다공성 분사기의 개발에 앞서 다공성재를 분사기에 적용하기 위해 다공성재를 통과하는 압축성 유체의 압력강하 특성을 파악하였다. Non-Darcy 유동의 압력강하는 점성력과 관성력으로 인한 손실을 포함하는 Forchheimer 방정식을 이용하여 도출할 수 있으며, 이 때 다공성재의 형상인자인 투과율과 관성력의 영향을 나타내는 Ergun 상수를 이용하여 다공성재를 통과하는 압축성 유체의 압력강하를 예측할 수 있다. 본 연구에서는 다공성재의 압력강하 특성을 나타내는 투과율와 Ergun 상수를 작동유체의 압력강하에 대한 함수로 나타내었으며, 최종적으로 이를 일반화하여 pore의 크기에 따라 압력강하를 예측할 수 있는 관계식을 도출하였다.

• 비파괴검사학회지
• /
• 제16권2호
• /
• pp.86-94
• /
• 1996

파괴역학을 기초로 한 구조물의 수명 관리와 안전성 평가에 있어서, 결함의 크기는 매우 중요한 변수인자이다. 집중유도형 교류전위차법(ICFPD)은 구조물 부재의 표면, 이면 및 내면에 존재하는 결함을 검출하고, 그 크기를 측정하기 위하여 개발하였다. 본 비파괴법의 원리는 교류 전류가 흐르는 하나의 도선에 의하여 국부적인 영역에 전류를 집중적으로 유도하는 것을 이용하였다. 도선에 흐르는 전류는 일정 크기와 주파수를 갖는다. 금속표면에 유도된 전위는 탐촉자에 설치된 전위측정용 단자(potential pick-up pins)로 측정한다. 본 논문은 집중유도형 교류전위차법을 이용하여 평판 시험편에 도입한 표면결함과 이면결함을 평가하였다. 표면결함의 경우, 전위차 분포는 결함의 경사도에 따라 변화하고, 결함부와 결함단부의 전위차는 결함의 경사도 및 깊이에 따라 변화한다. 이면결함의 경우, 전위차 분포는 표면결함의 전위차 분포와 구분이 되며, 결함부에서의 전위차는 결함의 깊이에 따라 변화한다.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.283-291
• /
• 2007

The static pressure distribution, atomization characteristics and velocity distribution of tapered nozzle swirl spray is analyzed and then compared with original swirl spray. The static pressure distribution inside the swirl spray is measured using a piezoresistive pressure transducer. Phase Doppler anemometry (PDA) is applied to measure and analyze the droplet size and velocity distribution of tapered nozzle and original swirl spray. The static pressure inside the spray shows the lower value compared to the atmospheric pressure and this pressure drop is getting attenuated as the taper angle is increased. The droplet size of tapered nozzle spray shows similar value compared to the original swirl spray at the horizontal mainstream while it shows increased value at vertical mainstream. The deteriorated atomization characteristics of tapered nozzle spray is improved by applying high fuel temperature injection without causing the spray collapse. The velocity results show that the larger portion of fuel is positioned with higher injection velocity, and the smaller portion of fuel is positioned with lower injection velocity with causing spatially non-uniform mixture distribution.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1102-1114
• /
• 2002

An electret filter is composed of permanently charged electret fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using poly-disperse particles when submicron particles were loaded. Long-term experiments were conducted by applying two different charging states, which were spray electrification and charge equilibrium by bipolar ionization. In order to investigate the effect of particle loading in filter media, NaCl particles were generated from 0.1% and 1% solutions by an atomizer. Liquid DOS particles were used to evaluate the effect of liquid particles on the collection efficiency of an electret filter. The results show significant effect of charge amount and size distribution of loading particles on the collection performance of a filter media in submicron region. Smaller particles loaded in electret fibers cause a more rapid degradation in collection efficiency and have lower minimum efficiency with time. The pressure drop of a filter media do rarely increase when the collection efficiency decreases to the minimum value. For the larger particles charged by spray electrification, which have charge amounts more than that of Boltzmann equilibrium charge distribution, the pressure drop of a filter media slowly increases in comparison with that of equilibrium charged particles. For DOS particles it is shown that the charging level of an electret filter severely decreases and the collection efficiency is below 10% in some particle size range.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.264-274
• /
• 1997

A numerical analysis on condensation and coagulation of the metallic species with fly ash particles pre-existing in an incinerator was performed. Waste was simplified as a mixture of methane, chlorine, and small amounts of Pb and Sn. Vapor-phase amounts of Pb- and Sn -compounds were first calculated assuming a thermodynamic equilibrium state. Then theories on vapor-to-particle conversion, vapor condensation onto the fly ash particles, and particle-particle interaction were examined and incorporated into equations of aerosol dynamics and vapor continuity. It was assumed that the particles followed a log-normal size distribution and thus a moment model was developed in order to predict the particle concentration and the particle size distribution simultaneously. Distributions of metallic vapor concentration (or vapor pressure) were also obtained. Temperature drop rate of combustion gas, fly ash concentration and its size were selected as parameters influencing the discharged amount of metallic species. In general, the coagulation between the newly formed metal particles and the fly ash particles was much greater than that between the metal particles themselves or between the fly ash particles themselves. It was also found that the amount of metallic species discharged into the atmosphere was increased due to coagulation. While most of PbO vapors produced from the combustion were eliminated due to combined effect of condensation and coagulation, the highly volatile species, PbCl$_{2}$ and SnCl$_{4}$ vapors tended to discharge into the atmosphere without experiencing either the condensation or the coagulation. For Sn vapors the tendency was between that of PbO vapors and that of PbCl$_{2}$ or SnCl$_{4}$. To restrain the discharged amount of hazardous metallic species, the coagulation should be restrained, the number concentration and the size of pre-existing fly ash particles should be increased, and the temperature drop rate of combustion gas should be kept low.