• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.903-927
• /
• 2012

The study aimed to analyze middle school students construction of physics inquiry problems for open inquiry from the viewpoint of variable isolation and clarification, and investigate students' difficulties during the processes of variable isolation and clarification to get implications for teaching and learning strategies for small group open inquiry activities which have been included in the 2007 national curriculum. The participants were 4 students who had attended an outreach program for the science gifted run by a university institution located in Seoul area. They performed an open inquiry on egg drop for 13 lessons for 30 hours. Level descriptions for variable isolation and clarification have been developed and applied to analyze students' inquiry problems and variables included by the problems. Students iterated inquiry processed 5 times and the inquiry problem showed progress gradually. Dependent variables have been isolated ahead and the levels of variable isolation and clarification showed higher than the independent variables. Many kinds of independent variables isolated extensively and the independent variables and control variables have been mingled. One of the reasons why students had some difficulties in isolation of independent variables could be the absence of theoretical models. The realities of school lab could restrict the variable isolation and clarification as well as topic selections. Some sensory or extensive variables such as broken eggs and drop height seem to be salient to be focused on as core variables. Lack of background knowledges could be one of the reasons for students' difficulties in variable clarification, such as theoretical definitions and operational definitions. As a result of lacking background knowledges, students could not construct theoretical models even though they could isolate and clarify variables as scientific lexical definitions. Some perceptions of inquiry as trial and error or reckless establishment of causal relations between variables could be accounted as one reason.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.17-27
• /
• 2020

The purpose of this study is to confirm the effects of a 6-week high-intensity combined training program on canoe athletes' cardiorespiratory function, isokinetic trunk strength, and anaerobic power. For the purpose of this study, the high-intensity combined training program was applied to 9 high-school canoe athletes. The high-intensity combined training program consists of aerobic exercise performed 2 times a week (Tuesday and Thursday), anaerobic exercise performed 3 times a week (Monday, Wednesday, and Friday), and flexibility exercise performed 5 times a week. The core of the high-intensity combined training program was the anaerobic training program performed with 100% weight for repetition; otherwise, the existing training method was divided into the percentage (%) of the 1RM. The aerobic exercise and the gym ball exercise are performed subsidiarily. Results showed that there was a statistically significant difference in height and muscle mass, whereas there was no statistically significant difference in weight, body fat percentage, and BMI followed by the high-intensity combined training program. There were statistically significant differences in maximum oxygen uptake and total exercise time. The angular velocity of 30°/sec showed a statistically significant difference in the peak torque item of flexors only. Also, the angular velocity of 120°/sec showed a statistically significant difference in the total work item of extensors only; however, there was no statistically significant difference in all the items of peak power, average power, and peak drop. In conclusion, it seems that the high-intensity combined training program may be applied as a training program for enhancing canoe athletes' performance. For further studies, more than 6 weeks training program with more participants would show improved results of isokinetic strength and anaerobic power in athlets.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.678-686
• /
• 2016

The effect of internal and shroud nozzle distributor to bubbling fluidized beds which has the size of $0.3m-ID{\times}2.4m-high$ column was modeled by CPFD (Computational Particle-Fluid Dynamics). Metal-grade silicon particles (MG-Si) were used as bed materials which have $d_p=149{\mu}m$, ${\rho}_p=2,325kg/m^3$ and $U_{mf}=0.02m/s$. Total bed inventory and static bed height were 75 kg and 0.8 m, respectively. Effect of vertical internal on the bubble rising velocity was investigated. Bubbles were split by internal when the axial position of the internal from the distributor, z = 0.45 m. Bed pressure drop and axial solid holdup were not affected by internal. However, in the case that axial distance of internal from distributor was too close to jet penetration length, bubbles were not separated and bypassed internal, and faster than without internal or z = 0.45 m.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.29-44
• /
• 1999

This paper shows the results of model tests on the lateral behavior of single rigid pile, which was constructed by driving, in homogeneous and non-homogeneous (two layered) NakDong River sands. The purpose of the present paper is to investigate the effect of ratio of lower layer thickness to embedded pile length, relative density of sand and pile construction conditions (Driven & Embedded piles) on the characteristics of lateral behavior of single pile. These effects can be quantified only by the results of model tests. As a model result, the lateral behavior depends upon the pile construction condition in loose-density soil more than in high-density soil. If the pile construction depends upon driving construction, the decrease of deflection remarkably increases for both loose homogeneous sand and non-homogeneous soil$(E_{h1}/E_{h2}/=0.18)$ with high thickness of upper layer but the decrease of maximum bending moment shows the opposite result to the decrease of deflection. And, with respect to deflection, it was found that the deflection ratio $(y_{Driven}y_{Embedded})$ of embedded to driven piles has the ranges of 0.65 - 0.88 $(D_r=90%)$0.38 - 0.65 $(D_r=61.8%)$ for each relative density of homogeneous soil and the range of 0.6 - 0.88 for non-homogeneous soil. Also, in this study, the experimental equation for the effects of drop height (DH) and H/L on the ratios of $y_D/y_E\; and MBM_D/MBM_ E$ is suggested from model tests.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.549-558
• /
• 2014

Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.19-31
• /
• 1994

The objective of this study is to conduct a thermal-hydraulic analysis on the spent fuel pool and to evaluate a parametric effect for the thermal-hydraulic analysis of spent fuel pool. The selected parameters are the Reynolds Number and the gap flow through the oater gap between fuel cell and fuel bundle. The simplified flow network for a path of fuel cells is used to analyze the natural circulation phenomenon. In the flow network analysis, the pressure drop for each assembly from the entrance of the fuel rack to the exit of the fuel assembly is balanced by the driving head due to the density difference between the pool fluid and the average fluid in each spent fuel assembly. The governing equations ore developed using this relation. But, since the parameters(flow rate, pressure loss coefficient, decay heat, density)are coupled each other, iteration method is used to obtain the solution. For the analysis of the YGN 3&4 spent fuel rack, 12 channels are considered and the inputs such as decay heat and pressure loss coefficient are determined conservatively. The results show the thermal-hydraulic characteristics(void fraction, density, boiling height)of the YGN 3&4 spent fuel rack. There occurs small amount of boiling in the cells. Fuel cladding temperature is lower than 343.3$^{\circ}C$. The evaluation of parametric effect indicates that flow resistances by geometric effect are very sensitive to Reynolds number in the transition region and the gap flow is negligible because of the larger flow resistance in the gap flow path than in the fuel bundle.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.17-24
• /
• 2006

A demonstration facility for advanced spent fuel conditioning process (ACP) is under construction in KAERI. In this hot cell facility, all process equipments and materials are taken in and out only through the rear door. The working table in front of the process rear door is specially designed to be openable for the efficient use of the space. This paper presents the structural safety analysis of the openable working table, for the normal operational load condition and accidential drop condition of heavy object. Both cases are investigated through static and dynamic finite element analyses. The analysis results show that structural safety of the working table is sufficiently assured and the working table is not collapsed even when an object of 500 kg is dropped from the height of 50 cm.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.201-217
• /
• 2014

There is likely to be a fit problem when women aged in their 30s-40s purchase down-age clothing from brands that target women in their 20s. To identify the part of the lower body that causes the fit problem, the sizes and types of lower body of women in their 30s-40s were compared with those of women in their 20s. The data for this study was from the 2010 Size Korea survey of body measurements of 1675 female adults in their 20s-40s. To examine differences in the average sizes of the lower body between women in their 20s and 30s-40s, descriptive statistics and t-tests were conducted. Factor and cluster analysis were used to classify body types by age groups. On the whole, compared to women in their 30s-40s, women in their 20s were found to be higher for all height items and smaller for size, thickness and width items. The result of the Glycemic index analysis showed that the body type of women in their 20s was generally larger than that of women in their 30s-40s. In addition, women in their 20s had a large drop value compared to those in their 30s-40s, whereas flatness of body cross section was bigger in the group of women in their 30s-40s. Four factors related to the lower body type of female adults in their 20s-40s were identified in the factor analysis, and three categories of body type were identified by cluster analysis. A Type 1 individual had abdominal obesity and chubby lower limbs, Type 2 had short legs and slightly chubby lower limbs, and Type 3 had long legs and a skinny lower body. A significant number of women in their 30s-40s were included in the Type 1 group, which was the least common category for women in their 20s.

• Journal of Technologic Dentistry
• /
• v.36 no.2
• /
• pp.83-89
• /
• 2014

Purpose: This study is to evaluate the effect of modeling liquid on the shear-bond strength between zirconia core and veneering ceramic. Methods: Disk-shaped (diameter: 12.0mm; height: 3.0mm) zirconia were randomly divided into six groups according to the surface conditioning method and whether modeling liquid is used or not to be applied (N=60, n=10 per group): group 1-control group with distilled water(ZD); group 2-control group with modeling liquid(ZM); group 3-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$(AD) with distilled water; group 4-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$ with modeling liquid(AM); group 5-liner with distilled water(LD); group $6{\pounds}{\neq}liner$ with modeling liquid(LM). Contact angles were determined by the sessile drop method at room temperature using a contact angle measurement apparatus. The specimens were prepared using dentin veneering ceramics, veneered, 3mm high and 2.8mm in diameter, over the cores. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50mm/min until failure. The fractured zirconia surfaces were evaluated by using stereomicroscope (${\times}30$). Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: ZD showed the highest contact angle($50.6{\pm}5.4^{\circ}$) and LD showed the lowest value($6.7{\pm}1.3^{\circ}$). Control groups and zirconia liner groups were significantly higher contact angle than liner groups(p<0.05). LD was the highest shear bond strength($43.9{\pm}3.8MPa$) and ZD was the lowest shear bond strength($24.8{\pm}4.9MPa$). Shear bond strengths of control groups and contact angle of liner groups were not significantly different((p>0.05). Liner groups presented adhesive failures. The others groups showed cohesive and adhesive failures. Conclusion: Modeling liquid groups showed lower contact angles and lower shear bond strength compared to those of distilled water groups.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.513-520
• /
• 2012

Objectives : In this study, contact angle and shore D hardness were measured, and a shark fin test was conducted after selecting five addition silicon(Blu-Mousse, BM; EXABITE II, EX; PERFECT, PF; Regisil$^{(R)}$ Rigid, RE; Silagum$^{(R)}$, SI) in order to figure out the properties of elastomeric interocclusal recording materials and reduce errors at interocclusal recording. 8) Methods : A contact angle was measured using a contact angle analyzer. After placing a drop of liquid on the surface of the specimens of interocclusal recording materials, a contact angle was photographed with a CCD camera on the equipment. In terms of a shark fin test, interocclusal recording materials were mixed for the time proposed by the manufacturer and inserted into the split ring of the Shark fin device. Twenty (20) seconds exactly, a metal rod was removed to make the materials slowly absorbed. Once they hardened, fin height was measured with a caliper after separating molds and trimming the specimens. The shore D hardness was measured with a shore D hardness tester(Model HPDSD, Hans Schmidt & Co. Gmbh, Germany) in sixty (60) minutes after fabricating specimens. In each experiment, five specimens, mean and standard deviation were calculated. A one-way ANOVA test was performed at the p>0.05 level of significance. In terms of correlation among the tests, Pearson correlation coefficient was estimated. For multiple comparison, Scheffe's test was carried out. Results : A contact angle was the highest in EX with $99.23^{\circ}$ (p<0.05) while the result of the shark fin test was the longest in RE with 5.45mm. SI was the lowest (0.27mm) with statistical significance. Among the interocclusal recording materials, significant difference was observed in terms of means (p<0.05). The shore D hardness was the highest in SI with 31.0 while RE was significantly low with 16.4 (p<0.05). Among the materials, statistically significant difference was observed in terms of means when compared to the rest materials (RE), BM, RE and SI (PF and EX) and the remaining materials (BM and SI) (p<0.05). In terms of correlations among the tests, a negative correlation occurred between shore D hardness and shark fin test(r=-0.823, p=0.000). Conclusions : According to the study above, it is necessary to understand the properties of interocclusal recording materials and consider contact angle, shark fin test and properties of shore D hardness to select appropriate materials.