• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.166-171
• /
• 2019

This paper has designed a current mode class D power amplifier to increase the transmission efficiency of a 6.78 MHz wireless power transfer (WPT) transmitter and to ensure stable characteristics even when the transmitting and receiving coil intervals change. By reducing the loss due to the parasitic capacitor component of the transistor, which limits the theoretical efficiency of the linear amplifier, this research has improved the efficiency of the power amplifier. The circuit design simulator was used to design the high efficiency amplifier, and the power output and efficiency characteristics according to the load impedance change have been simulated and verified. In the simulation, 42.1 dBm output and 95% efficiency was designed at DC bias 30 V. The power amplifier was fabricated and showed 91% efficiency at the output of 42.1 dBm (16 W). The transmitting and receiving coils were fabricated for wireless power transfer of the drone, and the maximum power added efficiency was 88% and the output power was $42.1dBm{\pm}1.7dB$ according to the load change causing from the coil intervals.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.77-95
• /
• 2023

In this study, the conceptual design of a tilt + stopped rotor type electric vertical take-off and landing (eVTOL) aircraft was performed using design iteration. Based on Hyundai Motor's S-A1, the mission profile was defined using the concept of urban air mobility (UAM), and configuration design and aerodynamic analysis were performed using OpenVSP and XFLR5 software. After estimating the required power for the designed eVTOL, the required performance of the battery and the maximum take-off weight (MTOW) were calculated. . It was iteratively calculated using Microsoft Excel and Visual Basic Application, and a new electric motor weight estimation formula was derived. Also, the sensitivity analyses of each design variables of an eVTOL was performed using the automated program.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.380-392
• /
• 2022

In this paper, the new vertiport regulations of the FAA and EASA are analyzed for urban air mobility(UAM), and the major components of the vertipad and the new specifications of each component are analyzed, and UAM operation in various environments is analyzed. Additional components for vertiport and regulations for surrounding airspace were also reviewed. Afterwards, based on the size of the S-A1 aircraft being developed by Hyundai Motors, domestic vertiport specifications and layouts were investigated for UAM operation, and these were applied to the city of Incheon. In addition, the time required for using a taxi or car were compared with the time required for using UAM between major locations in Incheon and Seoul.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.261-268
• /
• 2017

The topographic volume estimation is carried out for the earth work of a construction site and quarry excavation monitoring. The topographic surveying using instruments such as engineering levels, total stations, and GNSS (Global Navigation Satellite Systems) receivers have traditionally been used and the photogrammetric approach using drone systems has recently been introduced. However, these methods cannot be adopted for inaccessible areas where high resolution satellite images can be an alternative. We carried out experiments using Kompsat-3/3A data to estimate topographic volume for a quarry and checked the accuracy. We generated DEMs (Digital Elevation Model) using newly acquired Kompsat-3/3A data and checked the accuracy of the topographic volume estimation by comparing them to a reference DEM generated by timely operating a drone system. The experimental results showed that geometric differences between stereo images significantly lower the quality of the volume estimation. The tested Kompsat-3 data showed one meter level of elevation accuracy with the volume estimation error less than 1% while the tested Kompsat-3A data showed lower results because of the large geometric difference.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2018

Through the design and production of works for the third semester as a major unit, It is proposed the process of satisfying the graduation standards with the design and production process of the drone which can be applied to various mobile environments. Using the shape of Ring Propeller, it is made to be able to play both the role of generating lift as a propeller and the role of a wheel that touches the ground through the surface of the rim. In addition, the Servo Motor is used to convert the drive shaft of the motor to the correct angle according to the command. Then, based on the idea, the 3D printing is implemented to confirm the result of the configuration, and the circuit for driving the propulsion is designed and manufactured. As a result, the conversion of the desired propulsion system during air navigation and operation failed due to the weight increase of the propellant. It is confirmed that the size of the thrust and the tolerance limit of the ring propeller are the errors. Through these processes, it has been recognized to have experience of creative thinking and cooperation through engineering approach and comprehensive design, and confirmed to satisfy the graduation criteria by writing an engineering paper on the result.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.317-325
• /
• 2022

In this paper, we developed a single frequency-based RRAIM to monitor integrity of the UAM landing vertically in urban area with only low-cost single-frequency GPS receiver. Conventional dual-frequency RRAIM eliminates ionospheric delay through a combination of frequencies. In this study, ionospheric delay was directly modeled. Drift error of residual ionospheric delay is modeled using the previously studied result on ionospheric rates of change. To verify the performance of the proposed RRAIM algorithm, a simulation of vertical landing UAM in urban area was conducted. It was assumed that the protection level at the initial position was calculated through SBAS correction data. During vertical landing, integrity monitored by receiver alone without external correction data. In the 60 sec simulation, the protection level of the proposed RRAIM compared to the conventional RRAIM was calculated to be 140% due to the accumulated ionospheric delay error. Nevertheless, it was confirmed that the final vertical protection level meeting the requirements of LPV-200, which cannot be achieved with single frequency GPS receiver alone.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.508-514
• /
• 2020

Geofence defines the area that UAS should not enter or exit to ensure the safety of their operations, and is considered as one of critical capabilities of the UTM (UAS traffic management) system. In this study, a geofence simplification method using modified perpendicular algorithm is proposed. The performances of the proposed geofence simplification method were evaluated with actual building data, and the evaluation results confirmed that the number of vertices can be effectively reduced while minimizing the spatial size of the geofence.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.233-239
• /
• 2016

NASA(미국 항공우주청)를 중심으로 무인항공기교통관리(UTM) 체계를 이용한 드론 항공교통통제 모의시험을 진행하고 있다. 국내에서도 2017년부터 안전한 무인항공기교통관리(UTM) 체계 구축을 위한 '저고도 무인기 감시관리 기술 개발 및 시스템 시범 운용사업'을 진행할 예정이다. 본 논문은 지상도로망을 버드뷰(Birdview)처럼 내려다보며 비행할 수 있는 저고도 드론이 안전하고 효율적인 운항을 보장하기 위해서는, 상공에 장애물이 없는 지상도로망의 상공에 가상도로망과 가상신호체계를 확장시킨 한국형 가상 'SKYWAY' 항법 및 관제 체계(${\mu}$ATM)에 관한 기획 연구에 관한 것이다.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.1
• /
• pp.133-148
• /
• 2016

Voices demanding a revision of the aviation law on the operating drones are continuously rising high with the increase of their applicability in various industry fields. According to the current regulations, drones are permitted to fly under very strict conditions, which include limited places and the line-of-sight visibility from pilots. Because of the strict regulations, it is almost impossible for drones to be used in many industries such as parcel delivery services. To improve the business value of drones, we have to improve the accuracy of drones' positions and provide the proper protection levels in order to detect and avoid any risks including the collisions with the other drones. SBAS(Satellite Based Augmentation System) can support the aviation requirements with the accuracy and integrity so as to reduce the position errors and to calculate the protection levels of drones. In this paper, we assign the flight heights of drones according to the decision heights as per LAAS(Local Area Augmentation System) landing categories and conduct a simulation to predict the SBAS available time of the day.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.195-204
• /
• 2017

Mobile robots are used for years as a valuable research and educational tool in form of available open-platform designs and Do-It-Yourself kits. Rapid development and costs reduction of Unmanned Air Vehicles (UAV) and ground based mobile robots in recent years allowed researchers to utilize them as an affordable research platform. Despite of recent developments in the area of ground and airborne robotics, only few examples of Unmanned Surface Vehicle (USV) platforms targeted for research purposes can be found. Aim of this paper is to present the development of open-design USV drone with integrated multi-level control hardware architecture. Proposed catamaran - type water surface drone enables direct control over wireless radio link, separate development of algorithms for optimal propulsion control, navigation and communication with the ground-based control station. Whole design is highly modular, where each component can be replaced or modified according to desired task, payload or environmental conditions. Developed USV is planned to be utilized as a part of the system for detection and identification of marine and lake waste. Cameras mounted to the USV would record sea or lake surfaces, and recorded video sequences and images would be processed by state-of-the-art computer vision and machine learning algorithms in order to identify and classify marine and lake waste.