• Informatization Policy
• /
• v.25 no.2
• /
• pp.3-19
• /
• 2018

With the introduction of video cameras into law enforcement, a great deal of police organizations have adopted the technology in their routine crime prevention activities. The up-to-date systems of ambient surveillance energized by CCTV, police wearable cameras, drones, and thermal imaging devices enable the police to thoroughly monitor public spaces as well as to rigorously arrest on-scene criminals. These efforts to improve the level of surveillance are often met with public resistance raising concerns over citizens' rights to privacy. Recent studies on the use of police video equipment have constantly raised the issues related to the lack of applicable legal provisions, risk of personal information and privacy infringement as well as security vulnerabilities. In this regard, the present study attempted to review the public surveillance methods currently used by law enforcement agencies worldwide within the context of public safety and individual rights to privacy. Furthermore, the present study also discussed the legal boundaries of police use of video equipment to address public concerns over privacy issues.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1124-1129
• /
• 2021

The application area based on UAV (Unmanned Aerial Vehicle) is continuously increasing as time passing by. In particular the UAVs which consist of more than four horizontal propellers and the functionality of VTOL (Vertical Take-Off and Landing) are utilized in diverse platforms and the application products due to their safety and aerodynamically simpler design and architectures. The most UAV missions are controlled by GCSs (Ground Control System). The GCSs are generally connected to the internet and get electrical map and environmental information such as temperature, humidity, wind speed, wind direction and so on. In this paper, we design a system for UAV system to have capability of approaching to a certain ship and monitoring her efficiently by using AIS (Auto Identification System) information. Furthermore we verify that adapting AIS on GCS side is more efficient through experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.21-30
• /
• 2022

The restart of scramjet engine is almost impossible in case its unstart happens during engine operation. Therefore, it is essential to prognosticate the scramjet engine unstart phenomena. A numerical simulation of a scramjet engine is conducted to investigate the unstart process of the scramjet engine by adjusting the backpressure at the isolator outlet to the engine analysis environment. The start and unstart of the engine are identified by applying a support vector machine (SVM) through the data measured by wall pressure so that the locations of the pressure sensors most suitable for the unstart detection are selected. And the operation conditions in which the engine is avoid to be unstarted are quantified to perceive the safety margin.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.481-487
• /
• 2023

Recently, interest in UAM (Urban Air Mobility) has surged as a critical solution to urban traffic congestion and air pollution issues. However, efficient UAM operation requires accurate 3D Point Cloud data processing, particularly in separating the ground and objects. This paper proposes and validates a method for effectively separating ground and objects in a UAM environment, taking into account its dynamic and complex characteristics. Our approach combines attitude information from MEMS sensors with ground plane estimation using RANSAC, allowing for ground/object separation that isless affected by GPS errors. Simulation results demonstrate that this method effectively operates in UAM settings, marking a significant step toward enhancing safety and efficiency in urban air mobility. Future research will focus on improving the accuracy of this algorithm, evaluating its performance in various UAM scenarios, and proceeding with actual drone tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.667-669
• /
• 2021

Recently, RFID/USN technology has been applied in various fields such as logistics, environment, education, home network, disaster prevention, military, and medical care, but despite the remarkable development of RFID/USN technology, it is difficult to apply it to marine industry due to the characteristics of poor marine environment. Therefore, satellites are mainly used in the marine sector, and existing communication networks are used in the coast, so measures for forming a shelf-only short-range network in the ocean are being considered. In this paper, we consider the use of drones as mobile base stations of USN as a base station role using USN in existing PS-LTE and LTE networks.Since autonomous navigation vessels are aiming for the intelligent system, the number of crew and labor force should be reduced and the function of autonomous network formation in the form of more stable and intelligent ICT convergence technology should be strengthened.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.15-20
• /
• 2024

The utilization of small unmanned aerial vehicles (UAVs) has expanded into both military and civilian domains, increasing the necessity for research to ensure operational safety and the efficient utilization of airspace. In this study, the calculation of minimum separation distances for the safe operation of small UAVs at low altitudes was conducted. The determination of minimum separation distances requires a comprehensive analysis of the total system errors associated with small UAVs, necessitating sensitivity analysis to identify key factors contributing to flight technology errors. Flight data for small UAVs were acquired by integrating the control system of an actual small UAV with a flight simulation program. Based on this data, operational scenarios for small UAVs were established, and the minimum separation distances for each scenario were calculated. This research contributes to proposing methods for utilizing calculated minimum separation distances as crucial parameters for ensuring the safe operation of small unmanned aerial vehicles in real-world scenarios.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.1-12
• /
• 2024

Purpose: The objective of this study was to improve the tunnel maintenance and monitoring technology by establishing the maintenance, management, and monitoring standards for shield and TBM tunnels, which had been applied more in recent years. Method: This study comprehensively analyzed and compared the data and model simulations of Seoul Subway Lines 7 and 9 and Bundang Line, shield and TBM tunnels in South Korea, tunnels in France and Japan, and Channel Tunnel in the UK. Result: This study set maintenance and monitoring standards when there was no design estimate based on numerical analyses such as section design and section analysis regarding the maintenance and monitoring section of shield and TBM tunnels. Conclusion: It is necessary to determine safety by comprehensively considering not only each monitoring item but also the changing trend and correlation of all items and compensation of the tunnel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.398-407
• /
• 2021

Firefighters (who are responsible for people's safety) have one of the jobs that are expected to have problems due to aging in the workforce. An increase in the average age of firefighters can lead to serious social problems. The aim of this study is to survey firefighters in Jeollanam-do about their awareness of aging in firefighters, and to propose a plan to prepare them for aging through investigation and analysis of work problems that may occur due to an aging workforce. The survey shows that the higher the age group, the higher the awareness of aging firefighters, and the higher the total work experience and internal/external work experience, the higher the awareness of aging. As a plan to solve various problems that may arise from aging in firefighters, regular operation of physical fitness promotion programs, field work, job rotation, and managerial measures (such as a change of position to an administrative department) are prepared, and drone or robot technology is used. These solutions include the introduction of applied high-tech technologies to firefighting activities, establishment of retirement management policies, and preparation of plans to revitalize the connection to private employment. In order to maximize the applicability of the field, government institutional plans and preparations are essential.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.73-82
• /
• 2021

According to the government's announcement of the safety management enhancement policy for small and medium-sized private construction sites, the subject of mandatory CCTV installation has been expanded from large construction sites to small and medium-sized construction sites. However, since the existing CCTV at construction sites has been used for simple control for safety management, so research is needed for monitoring of construction sites. Therefore, in this study, three vanishing points were calculated based on a single image taken with a monocular camera, and then a camera matrix containing interior orientation parameters information was determined. And the accuracy was verified by calculating the height of the target object from the height of the reference object. Through height determination experiments using vanishing points based on a monocular camera, it was possible to determine the height of target objects only with a single image without separately surveying of ground control points. As a result of the accuracy evaluation, the root mean square error was ±0.161m. Therefore, it is determined that the progress of construction work at the construction sites can be monitored through the single image taken using the single camera.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.451-463
• /
• 2022

Whenever a mineshaft accidentally collapses, speedy risk assessment is both required and crucial. But onsite safety diagnosis by humans is reportedly difficult considering the additional risk of collapse of the unstable mineshaft. Generally, drones equipped with high-speed lidar sensors can be used for such inspection. However, the drone technology is restrictively applicable at very shallow depth, failing in mineshafts with depths of hundreds of meters because of the limit of wireless communication and turbulence inside the mineshaft. In previous study, a three-dimensional (3D) scanning system with a single channel lidar was fabricated and operated using towed cable in a mineshaft to a depth of 200 m. The rotation and pendulum movement errors of the measuring unit were compensated for by applying the data of inertial measuring unit and comparing the similarity between the scan data of the adjacent depths (Kim et al., 2020). However, the errors grew with scan depth. In this paper, a multi-channel lidar sensor to obtain a continuous cross-sectional image of the mineshaft from a winch system pulled from bottom upward. In this new approach, within overlapped region viewed by the multi-channel lidar, rotation error was compensated for by comparing the similarity between the scan data at the same depth. The fabricated system was applied to scan 0-165 m depth of the mineshaft with 180 m depth. The reconstructed image was depicted in a 3D graph for interpretation.