• Korean Journal of Cognitive Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2000

Most of the important visual information is presented to driver through the display panel that is related to the vehicle. If display panel is designed with the c consideration of driver's visibility, drivers can get broad visual field and visual I information related to vehicle promptly and exactly during driving situation. Therefore display panel has direct relationship with the driver's task performance and it can be considered as an important device that affects the driver-automotive interaction. Many r researches about shape, characteristic and color of display panel have been performed, but not sufficient in this country Nowadays most of vehicles has an analog type display. but its shape and arrangement a are various without any definite standards about position. Therefore. experiments using evaluation tool (VISVEC System) were conducted to inquire the driver's preference on the major objects arrangement of display panel (speedometer. tachometer. fuel meter. and t thermometer) and to ascertain the factors that have an effect on drivers according to the objects position of the display panel The experiment results showed that there was no correlation between the arrangement c characteristics preferred by subjects and the cognitive accuracy but the cognition of V visual information more easy when the each major object has its area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.622-628
• /
• 2016

As the suction pad-supporting bike carrier attached to a car may be subject to an excessive dynamic load due to random vibrations and centrifugal forces during driving, its structural safety is of great concern. To examine this, the finite-element method with a fluid-structure interaction should be used because the pressure on the pad bottom is changed in real time according to the fluctuations of the force or the moment applied on the pad. This method, however, has high computing costs in terms of modeling efforts and software expense. Moreover, the accuracy of computation is not easily guaranteed. Therefore, a new method combining the experiment and computation is proposed in this paper: the bottom pressure and contact area of the pad under varying loads was measured in real time and the acquired data are then used in the nonlinear elastic finite-element calculations. The computational and experimental results obtained with the product under development showed that the safety margin of the pad under the axial loading is relatively sufficient, whereas with an excessive rotational loading, the pad is vulnerable to separation or a local surface damage; hence, the safety margin may not be secured. The predicted contact behavior under the variation of the magnitude and type of the loading were in good agreement with the one from the experiment. The proposed analysis method in this study could be used in the design of similar vacuum pad systems.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.465-475
• /
• 2016

Since inaccurate demand estimation for recent urban rail construction may result in financial burden to cities, precise prediction for operating cost as well as construction costs is necessary to avoid or reduce budget loss of the local or central government. The operating cost is directly related to the public fare and affect a policy to determine the rate system. Therefore, there is a pressing need to develop an estimating model for reliable operating cost of urban railway. This study introduces a new model to estimate the operating cost with new variables. It provides a better prediction in accuracy and reliability compared to the existing model, considering the feature of urban railway. For verification of our model, railway operation data from a few cities for the last five years were comprehensively examined to determine variables that affect the operating cost. The operating cost was estimated in a dummy regression model using five independent variables, which were average distance between stations, daily trains distance, total passenger capacity of a train in a train, driving mode(manned/unmanned), and investment type(financial/private).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.224-236
• /
• 2017

This study analyzed the characteristics of traffic accidents among elderly drivers according to area type in Gyeonggido(urban areas, urban-rural complex areas, and rural areas). Traffic accidents caused by unsafe driving are common in all three types of areas. In urban areas and urban-rural complex areas, traffic accidents were more frequent due to traffic violations and intersection accidents, while rural areas were more affected by central lines. Urban areas and urban-rural complex areas require simpler signal exposures, such as a simple straight line, left turn, or straight line and left turn signal rather than complex signal operations, such as overlaps in a signal operation. Improvement of non-signal intersections and unprotected traffic signal processing is also needed. In order to prevent the intrusion of the central line in rural areas, the center line guard rail should be prevented from penetrating the center line, and the influence of the vehicle headlamp should be reduced in the opposite direction. It is necessary to improve the visibility by using fluorescent letters to enlarge the font size of traffic signs and road signs, particularly to increase visibility at night and prevent traffic accidents at sunset. Minimal, simplified should be provided rather than complex phrases and information.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.17-25
• /
• 2011

This paper aims to find the optimal control gain for enhancing the convenience of electric walking frames and design a control algorithm. With the recent advances in medical technology, there has been a rapid increase in the aging population and a variety of mobile walking frames have been developed for improvement of the quality of life. However, the manual walking frames of such mobile aids don't have any electric motor which helps facilitate elderly users' walking and thus are not efficient enough for the old people of weak strength to use especially when moving on uneven surfaces such as slopes or thresholds. The types of electric walking frames have been developed to overcome such inefficiency. Electric walking frames require users' control operations for motor driving unlike manual frames. Therefore, when they are not properly handled, it causes considerable inconvenience to their users. The present study compared the electric walking frames with manual ones in terms of operational convenience and attempted to improve the user convenience of walking frames varying the control value for user convenience based on certain standards. This paper presented a haptic sensor designed to recognize the will to walk and measure the degree of convenience and proposed a control algorithm for improvement of convenience. For user convenience, this paper evaluated the relative convenience of walking frames in view of changing differences between the center of vehicle (COV) and the center of position (COP). With the employment of an electric walking frame and a new measuring method, all the processes were experimentally tested and validated.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.167-175
• /
• 2011

Evaluation of fuel consumption for the various road condition and vehicle type is necessary to perform the economic analysis of road construction which is important for the efficient design and management of road. Economic analysis of road should consider the social cost which can be divided into agency cost including initial construction expense, maintenance cost, and so on, and user cost consisting of vehicle operating cost, congestion cost, etc. Since vehicle operating cost depends on the traffic volume, fuel consumption that is a major part of vehicle operating cost will change by traffic volume as well. Fuel consumption is significantly affected by vehicle speed and road condition, especially the roughness. Thus, fuel consumption should be evaluated in terms of road condition, which is not currently considered. In this study, the estimation model of fuel consumption for the passenger cars in Korea has been developed by considering the road condition. First, the relationship between vehicle speed and fuel consumption that is used to calculate the vehicle operating cost for investment evaluation of transportation facility and the initial feasibility study of road construction was investigated. Second, with the consideration of road roughness, fuel consumption of the passenger car was measured. From the measurement, it was found that fuel consumption increased by $80m{\ell}$ per 100km driving as the roughness increased by 1m/km. Therefore, it is recommended that for the economic analysis of road design and management, the fuel consumption should be a function of road roughness.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.31-40
• /
• 2011

Generally, inappropriate driving conditions including geometric, traffic environmental, and driver psychological problems may be critical reasons of traffic accidents. Under this circumstance, various types of facilities have been installed to improve traffic safety by itself or as a set consisting of several other traffic safety facilities. In general, traffic accidents occur by several reasons combined rather than only a single reason, and thus the safety effect of the safety facilities cannot be simply analyzed with only a single improvement. For the study, traffic accident data on the roadway segments of interest are collected along with field survey data. For the analysis, various alternative analysis methods were evaluated in terms of assessing accident reduction from various types of traffic safety improvements. Among the alternative methods tested including simple before-and-after evaluation method, before-and-after evaluation yoked comparison, and Comparison Group (C-G) method, it was found that the C-G method is the most effective method for analyzing the traffic safety improvement effect. Adopting the C-G method, both single and multiple safety improvements were analyzed. The results from this study can potentially be applied to decide the best type of treatments to improve traffic safety as well as to measure the accident reduction effects from the treatments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.114-121
• /
• 2001

A circuit model for active-controlled field emitter array(ACFEA) as an electron source of active-controlled field emission display(ACFED) has been proposed. The ACFEA with hydrogenated amorphous silicon thin-film transistor(a-Si:H TFT) and Spindt-type molibdenum tips (Spindt-Mo FEA) has been fabricated monolithically on the same glass. A-Si:H TFT is used as a control device of field emitters, resulting in stabilizing emission current and lowering driving voltage. The basic model parameters extracted from the electrical characteristics of the fabricated a-Si:H TFT and Spindt-Mo FEA were implemented into the ACFEA model with a circuit simulator SPICE. The accuracy of the equivalent circuit model was verified by comparing the simulated results with the measured one through DC analysis of the ACFEA. The transient analysis of the ACFEA showed that the gate capacitance of FEA along with the drivability of TFT strongly affected the response time. With the fabricated ACFEA, we obtained a response time of 15$mutextrm{s}$, which was enough to make 4bit/color gray scale with the pulse width modulation (PWM).

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.73-79
• /
• 2020

With the recent strengthening of local autonomy and the recognition of the culture and tourism industry as a driving force for the fourth industrial revolution, the importance of research on the revitalization of the local culture and tourism industry is further emphasized. Thus, in this paper, the concept and type of local culture and tourism products were summarized and the research direction was presented through this. As a research method, the internal and external factors of the culture and tourism industry in Korea were used as the SWOT analysis method. In the text, three representative sites were selected and analyzed for the development of local cultural and tourism products, and Seoul, Jeju Island, and Gyeongju all found that they lacked local cultural and tourism products. It also found another value through its role of cultural development as well as the economic aspect of the development of cultural tourism products. In order to revitalize the local culture and tourism industry, which has become more important, the government proposed measures to promote differentiated creative products, efficient marketing, and legal security in various ways. In order for this study to be better data for researchers in the culture and tourism industry and related industries, research should be conducted with detailed surveys that could not be conducted due to various restrictions in the future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.6-11
• /
• 2010

Amount of power generated from solar photovoltaic can vary according to solar flux of sunlight due to nature of solar cell panel, and an angle that the sun and the surface of cell makes brings difference in amount of power generation. Solar flux is decided by location of surface of the Earth that is classified into longitude and latitude, but on the other hand, an angle that the sung and the surface of cell makes can be changed by changing the angle of a solar power generation device at the fixed location. A method of changing the angle of a solar power generation device as a measure for improving practical power generation efficiency. and studies about a solar tracking device for this are in active. This study conducted a research on a solar tracking system for improvement of solar power generation efficiency. A solar tracking system of this study is composed of a sensor part to confirm a location of the sun with a semiconductor photosensor using the photo conductive effect, and it analyzed output signal of a sensor by using microprocessor and it produced a control signal of driving part for tracking the sun. A solar power generator (25W) was produced to analyze performance of a solar tracking system and usefulness of a solar tracking device that was designed and produced in this study was confirmed through experiments.