• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.1035-1041
• /
• 2007

An improvement of driving motor burning damages on a couplingless type warship fire pump is studied. The pump consists of an induction motor a pump-motor shaft and a volute type impeller. The burning damage had occured by changing the material of the pump-motor shaft from carbon steel(SM 45C) to stainless steel(STS 316) for improving anti-corrision properity in sea water. It is shown that a material change on the pump-motor shaft can reduce the efficiency of driving motor and may cause motor burning in the process of pump development stage. This kind of motor burning problem can be solved by increasing the efficiency of the motor and changing the geometry of the inner parts.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.174-185
• /
• 1997

The performance of the solenoid actuated hydrogen injector and the capacitive peak-hold type driving circuit was predicted through the modeling of the injector and the driving circuit the modeling was composed of the driving circuit, the solenoid, the moving parts of the injector, and the hydrogen injection system. The performance of the injector through the modeling was compared with the results of the solenoid and injector rig tests, and those were consistent with each other. Through the prediction of the injector performance, the effects of the components such as electrical resistor, capacitor, and injector spring are easily known to the injector performance required.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.87-93
• /
• 2005

Three-dimensional ultrasonic probes being applied to the medical imaging can be grouped into three depending on the scanning methods, which are a mechanical type system, a free-hand system, and 2D phased arrays system. A mechanical type scanner uses a mechanically driven transducer to acquire series of 2D plane images. By integrating these images, a 3-D medical image can be constructed. A motor driving mechanism is a conventional choice for mechanically driving a transducer assembly which picks the raw ultrasonic images up. In this paper we attempt to design a 3D ultrasonic probe which has a operating mechanism of s tilting 3-D scanning. The motion of a transducer assembly of the ultrasonic probe is analytically modelled. We propose a selection procedure for the diameter of a wire rope driving the transducer assembly and the size of torsional spring which gives an initial tension to wire ropes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.17-22
• /
• 2006

Sunroof is getting widely used in automobiles since it maintains, compare to window, better air circulation as well as less noise while driving in high speed. In this study, we consider an electronic control type spoiler sunroof which slides backward after tilting a rear part of a glass. Installing a wind deflector on the sunroof reduces noise much more effectively. The height of the wind deflector is designed using a boundary theory related to incompressible air layer. The developed wind deflector is investigated experimentally by measuring a wind noise. When the height of the wind deflector is designed by a fixed type, the sunroof maintains a very quiet interior noise over a certain driving speed, nevertheless it produces relatively loud noise in low driving speed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.42-47
• /
• 2014

The use of BLDC motor in Vehicle and industrial field, it is operated by continuous and intermittent driving. When the intermittent driving is occurred by the rise and fall of temperature repeatedly, it was represented by different characteristics in case of continuous driving. So, it is very important that heat source estimation according to the duty ratio. In this paper, temperature characteristics according to the operating method of BLDCM was calculated by using the thermal equivalent circuit, and the validity of the study was demonstrated as compared to the calculated and experimental results.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.5
• /
• pp.657-670
• /
• 2012

Background: Today, numerous telematics technologies, i.e., technologies developed by integrating telecommunications with information processing, are applied in vehicles. One such developmental application of this technology to vehicles is to increase the safety or convenience of drivers by providing them with necessary information such as warnings and information on emergencies and traffic situations. However, under certain conditions, there is a high probability of traffic accidents if the driving workload is high. Nowadays, the navigation system is frequently used in the vehicles, this system provides various information including route to the driver. But, the existing navigation systems are not only considered a driver's reaction but also provide unilaterally to the information regardless of them. Such one-side information service type may miss important information to the driver. In addition, it sometimes interferes safety driving. Objective: To solve this problem, the intelligent navigation system needs to the providing way that it checks the driver's reactions after providing information. Namely, if the driver passes the information received from the navigation, then the intelligent system provides more loudly and more frequently. Method: Therefore, in this study we introduce the intelligent navigation system that it automatically controls modality type and its strength when the driver misses or overlooks the information for their safety and entertainment and we analyze the driver's cognitive responses about the modality type and its strength. Results: To evaluate the effectiveness of the proposed system, we analyzed the reaction time and driving workload for each type of the information, modality and its strength. Also we evaluated the users' subjective satisfaction and understanding based on a questionnaire.

• Korean Journal of Culture and Social Issue
• /
• v.12 no.4
• /
• pp.37-53
• /
• 2006

This study examined the perception of driving ability of drivers under stressful situation and it attempted to collect the base data in an effort to prevent the traffic accidents by the women drivers. For this purpose, 180 drivers residing in the Seoul and Gyeonggi region were selected to find out how they perceive their driving ability and driving ability of the others, and in particular, study was focused on in what kind of situation female drivers felt most stress out. Looking in relation to the driving ability, female drivers tend to assess overly high on driving ability of male drivers while making excessively low on the abilities of other female drivers. Looking into the stress of female drivers while driving, the female drivers experience more stress during driving compared to the male drivers. This type of result indicates that the women lack the confidence on driving abilities while experiencing severe stress on the driving performance.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.454-460
• /
• 2009

The objective of this study is to study the selection factors and satisfaction factors for different types of driving ranges and establish a basic date for marketing strategies of driving ranges. The research target group was fixed to customers older than full twenty of 12 indoor, outdoor driving ranges located in G metropolitan city & N city, M city, S city in. 564 surveys were used as effective samples. The result was achieved using the above mentioned objectives and methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.11
• /
• pp.915-919
• /
• 2011

We analyzed various forces affective to the charged particles in closed space, to explain the image degradation and lifetime-shortening phenomena because of particle lumping which is one of the serious problems in reflective displays. It is possible to predict the quantity of q/m which is the most important parameter in determining the optical and electrical characteristics, by calculating the image force and kinetic energy. For stable driving, the quantity of q/m must be in the defined range but it changes during the fabrication process, so we added the filtering process to solve this problem and obtained the well-defined nonlinear driving voltage coinciding with the threshold voltage. And we obtained the fully-driving property which prevents the particle lumping and decides the image quality and lifetime of panel from the optical characteristics and occupation surface of moving particles.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.3-7
• /
• 2007

There have been numerous studies directed toward the development of driving mechanisms for off-road mobility and rescue robots. To achieve surveillance, reconnaissance, and rescue, it is necessary for robots to have a driving mechanism that can handle off-road environments, We propose a new type of single-track driving mechanism with a variable geometry for a rescue robot, This mechanism has a symmetric configuration so that the robot can advance in two directions and also remain operable when overturned. By transforming its geometry, the robot can reduce energy consumption in steering and rotating as well as maximize its ability to climb obstacles such as stairs. The robot is also designed to have a compact size and low center of gravity to facilitate driving when on a set of stairs. In this paper, we analyzed the design parameters of the robot for the four phases of climbing stairs and determined the specifications needed to enhance its adaptability.