• 자동차안전학회지
• /
• 제14권3호
• /
• pp.35-40
• /
• 2022

In this study, the driving performances of elderly who's age is over 65 were evaluated. The driving simulation was conducted using a compact driving simulation (CDS) and the simulation scenarios were developed from actual roads by replicating geometry of skewed intersection and traffic control devices located in Jungnang-gu, Seoul, Korea. 27 elderly drivers and 10 non-elderly drivers were recruited and participated on the virtual turning right and going straight driving experiment of CDS. Virtual driving data of driving time, speed, distance, acceleration and deceleration speeds, brake power, and steering wheel rotation angle were recorded and analyzed. Generally, elderly driver took more times to pass through the skewed intersection road and showed lower approaching speed as much as 40% and 25% in case of turning right and going straight scenarios respectively. The speed deviation at skewed intersection road between elderly and non-elderly driver is expected to cause frequent lane changes and overtaking.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.60-69
• /
• 2022

Recently, the importance of simulation validation in a virtual environment for autonomous driving system validation is increasing. At the same time, interest in the advancement of the virtual driving environment is also increasing. To develop autonomous driving technology, a simulation environment similar to the real-world environment is needed. For this reason, not only the road model is configured in the virtual driving environment, but also the driving environment configuration that includes the surrounding environments -traffic, object, etc- is necessary. In this article, FMTC, which is a test bed for autonomous vehicles, is implemented in a virtual environment and advanced to form a virtual driving environment similar to that of real FMTC. In addition, the similarity of the virtual driving environment is verified through comparative analysis with the real FMTC.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.203-210
• /
• 2003

A simulation study was carried to analyze the vehicle fuel consumption on component basis. Experiments was also carried out to identify the simulation results, under FTP-75 Hot Phase driving conditions. and arbitrary driving conditions. A good quantitative agreement was obtained. Based on the simulation, fuel energy was used in pumping loss(3.7%), electric power generation(0.7%), engine friction(12.7%), engine inertia(0.7%), torque converter loss(4.6%), drivetrain friction(0.6%), road-load(9.2%), and vehicle inertia(13.4%) under FTP-75 Hot Phase driving conditions. Using simulation program, the effects of capacity factor and idle speed on fuel consumption were estimated. A increment of capacity factor of torque converter resulted in fuel consumption improvement under FTP-75 Hot Phase driving conditions. Effect of a decrement of idle speed on fuel consumption was negligible under the identical driving conditions.

• 자동차안전학회지
• /
• 제15권2호
• /
• pp.21-27
• /
• 2023

This paper presents a simulation tool for developing and evaluating automated driving systems' lane change algorithm in urban congested traffic. The behavior of surrounding vehicles was modeled based on driver driving data measured in urban congested traffic. Surrounding vehicles are divided into aggressive vehicles and non-aggressive vehicles. The degree of aggressiveness is determined according to the lateral position to initiate interaction with the vehicle in the next lane. In addition, the desired velocity and desired time gap of each vehicle are all randomly assigned. The simulation was conducted by reflecting the cognitive limitations and control performance of the autonomous vehicle. It was possible to confirm the change in the lane change performance according to the variation of the lane change decision algorithm.

• 자동차안전학회지
• /
• 제15권3호
• /
• pp.34-42
• /
• 2023

Simulation-based virtual testing is known to be a major requirement for verifying the safety of autonomous driving functions. However, in the simulation environment, there is a difficulty in that all driving environments related to the autonomous driving system must be realistically modeled. In particular, C-ITS (Cooperative-Intelligent Transport Systems) is essential for urban autonomous driving of Lv.4, but the approach to modeling for C-ITS service in the MILS (Model in the Loop Simulation) environment is not yet clear. Therefore, this paper aims to deal with V2X (Vehicle to Everything) modeling methods to effectively apply C-ITS-based autonomous cooperative driving services in the MILS environment. First, major C-ITS services and use cases for autonomous cooperative driving are analyzed, and a modeling method of V2X signals for C-ITS service simulation is proposed. Based on the modeled V2X messages, the validity of the proposed approach is reviewed through simulations on the C-ITS service use case.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제20권2호
• /
• pp.107-131
• /
• 2014

본 연구에서는 운전자의 성별과 운전경력, 위험 운전상황의 유형(성향요인이 강조된 끼어들기 상황 vs. 상황요인이 강조된 급정거 상황), 그리고 운전분노 평정관점(행위자 관점 vs. 관찰자 관점)에 따른 운전자의 운전분노 수준 차이를 운전 시뮬레이션 기법을 이용하여 비교하였다. 본 연구의 주요 결과를 요약하면 다음과 같다. 첫째, 성별과 운전경력에 따른 운전분노 수준에서의 차이를 운전상황 유형이나 운전분노 평정관점을 함께 고려하지 않고 독립적으로 분석한 결과 성별과 운전경력에 따른 차이가 각각 유의하지 않았다. 둘째, 운전분노 수준에서의 행위자-관찰자 효과는 도로여건 등과 같은 상황변인이 상대적으로 더 많이 강조된 급정거 상황보다는 상대운전자의 의도가 비교적 분명하게 드러나는 조건인 끼어들기 상황에서 주로 관찰되었다. 셋째, 운전자의 성별과 운전경력, 그리고 운전분노 평정관점을 통합적으로 고려하여 살펴본 결과 운전경력이 짧은 여성운전자의 경우 타인의 끼어들기에 대해서는 매우 높은 수준의 분노를 경험하는 반면, 자신의 끼어들기에 대해서는 매우 낮은 수준으로 상대운전자가 운전분노를 경험할 것으로 추정하는 경향이 더 높았다. 이러한 결과는 운전자의 성별과 운전경력에 따른 운전분노에서의 차이가 위험 운전상황의 유형과 행위자- 관찰자 관점에 따라 매우 다른 양상으로 나타날 수 있다는 것을 시사한다.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.89-102
• /
• 2007

Generally, it is well known that driving in tunnel imposes large burden to driver because of spatial constraint, limited visual field and so on. And such a burden of driver result in high accident occurrence. In this reason, studies dealing with features of driving and traffic flow in tunnel have been performed. However, information about characteristics of drivers and traffic in a very long tunnel is not accumulated yet. The purpose of this study is to identify the relations between tunnel length and burden of driver, driving patterns, traffic flow characteristics using the tunnel simulator that realizing various tunnel situations. For this, the tunnel simulation program was developed along 11km-length section. And biological data of 10 subjects gained from driving condition in simulation program was analyzed and compared with the result of real driving condition.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.250-257
• /
• 1999

Driving simulators are used effectively for human factor study, vehicle system development and other purposes by enabling to reproduce actural driving conditions in a safe and tightly controlled enviornment. Interactive simulation requries appropriate sensory and stimulus cuing to the driver . Sensory and stimulus feedback can include visual , auditory, motion, and proprioceptive cues. A fixed-base driving simulator has been developed in this study for vehicle system developmnet and human factor study . The simulator consists of improved and synergistic subsystems (a real-time vehicle simulation system, a visual/audio system and a control force loading system) based on the motion -base simulator, KMU DS-Ⅰ developed for design and evaluation of a full-scale driving simulator and for driver-vehicle interaction.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.163-172
• /
• 2004

Nowadays, to analyze the dynamic characteristics of the automotive driving system, the computer simulation linked up with VR(Virtual Reality) technology is treated as the useful method with the improvement of computing ability. In this paper, the VR simulation system has been developed to investigate the driving characteristics of the ASV(Advanced Safety Vehicle) equipped with an ACC(Adaptive Cruise Control) system. For the purpose, VR environment which generates 3D graphic and sound information of the vehicle, the road, the facilities, and the terrain has been organized for the driving reality. Mathematical models of vehicle dynamic analysis including the ACC model have been constructed for computer simulation. The ACC modulates the throttle and brake functions to regulate the vehicle speed so that vehicles could keep proper spacing. Also, the real-time simulation algorithm synchronizes vehicle dynamic simulation with the graphic rendering. With the developed VR simulation system, simple scenarios are applied to analyze the dynamic characteristics. It is shown that the VR simulation system could be useful to evaluate the adaptive cruise controlled vehicle on various driving conditions.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.6-13
• /
• 2013

This study focuses on finding ECO driving patterns which consider driving safety of the ATO system train and reliability and which optimize efficiency of the driving energy consumption. Research results derived by performing simulation of those 5 models show that the emergency braking which affects safety of passenger and the machinery is minimized, and safe driving speed is maintained by the prohibition of drastic acceleration/deceleration, coasting and constant-speed driving. Therefore if this result is applied to the urban railway train by amending or making ATO program to save energy usage that improve environmental quality, its effects as ECO driving pattern is huge.