• 조명전기설비학회논문지
• /
• 제19권5호
• /
• pp.17-22
• /
• 2005

본 연구에서는 직경이 50[mm], 두께가 4.5[mm]인 디스크형 압전 변압기의 구동부와 발전부의 전극 면적비를 각각 1.4:1, 2:1 및 3:1로 분할하여, 부하 저항을 변화(100${[\Omega]}\~70{[k\Omega]}$)시키면서 전기적 특성을 측정하고, 이를 토대로 한 압전변압기의 승압비에 관한 메카니즘을 정량적 및 정성적으로 해석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.135-138
• /
• 2001

This paper presents micro step driving method using VHDL(Very high speed integrated circuit Hardware Description Language) which can configure CPLD(Complex Programmable Logic Device). Using VHDL which can do abstractive programming is similar to high level language. The whole block divided into five parts with freq. divide part, saw-tooth wave generation part, sine-cosine wave generation part, comparative part, out part. In the result of this study, peripheral circuits are to be simple and using LPM(Library of Parameterized Modules) is more easily to configure circuit. It is easy to verify and implement by using VHDL. To subdivide one natural step, we confirm that using micro step driver is expected that the rotor motion is stepless very smooth.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.74-78
• /
• 2010

In this paper, 2-axis driving mechanism, which uses voice coil motor (VCM), is proposed to measure the friction force. The proposed VCM actuator consists of two parts; structural part and magnetic circuit part. Structural part is simplified to perform the friction experiments. Magnetic circuit part is composed of two parts. The experiments are accomplished by changing the mass of moving part. Through the experiments, optimal dimension is selected. Finally, the experimental results are verified and the optimal case is applied to the 2-axis driving mechanism, optical image stabilization actuator.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.996-1002
• /
• 2013

This study addresses the development of a full duplex robotic system for transferring flat-panel display glass. We propose to accomplish this using a bidirectional linear transfer mechanism in place of the conventional rotary transfer mechanism. The developed full duplex robot comprises a driving part that carries the glass panel laterally, vertical part that can be moved up and down by means of a ball screw and linear motion guide arrangement, and hand part that slides by the cylinder of the driving part along the guide rail with a V-guide bearing attached to the bottom of the support. In addition, an alignment part prevents the hand part from derailing and holds the hand part while the driving part moves horizontally. The full duplex robot lifts and drives a glass panel directly while transferring it to the buffer and does not require rotational motion. Therefore, both transferring and stacking are realized with a single device. This device can be used in existing industrial facilities as an alternative to existing industrial robots in current as well as future process lines. The proposed full duplex robot is expected to save considerable amounts of time and space, and increase product throughput.

• Journal of Information Display
• /
• 제9권4호
• /
• pp.45-49
• /
• 2008

The characteristics of the sustain-driving circuit were examined in this paper. The sustain-driving circuit is in charge of the most important part of PDP driving because it manages most of the power consumption in the PDP. A couple of gatedriving circuits for the sustain-driving circuit were introduced in this paper, and a new driving circuit was also proposed. This new circuit is more cost-effective and has a simpler PCB layout compared to the conventional one. Some additional driving advantages were noted as well.

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.94-100
• /
• 2022

It is common for commercial vehicles to make the top part according to the use after making the bear chassis, and to connect various devices with the bear chassis. Various brackets used in bear chassis for the development of all automobiles, including commercial vehicles, play a role of connecting the components required for driving and operating the car to the car body. In commercial vehicles, components necessary for operation are installed in the bear chassis; that is, the bear chassis of commercial vehicles is a space where the devices required for driving and operating the vehicle are installed. The devices required for the configuration of the vehicle are drive, brake, exhaust and steering, etc. These devices are basically connected to the body, the front axis, or the rear axis. The part interlinking the apparatuses required for the vehicle drive to the car body or axis is bracket. In this study, we analyzed the boundary conditions to evaluate the stability of the three brackets that connect the components of the car to the front axis of the new type of 30-seater bus in the development process. In order to analyze the boundary conditions, the boundary conditions according to the driving condition of the vehicle were classified. For stress analysis to evaluate the stability of brackets according to the driving state of the vehicle, it is reasonable to give the bracket a boundary condition of harsh conditions.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.51-57
• /
• 1998

Recently, bent-axis-type axial piston pumps driven by rods being in extensively used in the world, because of simple design, lightweight, effective cost. So, to guarantee the quality of bent-axis-type axial piston pumps driven by rods, it is necessary to know characteristics of the driving mechanism of rods. But, as they perform both reciprocating and spinning motions, it is difficult to understand driving mechanism. In this paper, I studied the theoretical driving mechanisms of cylinder block driven by rods through geometric method. I found that the cylinder block was driven by one rod in limited area and the driving area was changed by rod's tilting angle and cylinder block's swivel angle.

• 드라이브 ㆍ 컨트롤
• /
• 제9권2호
• /
• pp.15-20
• /
• 2012

Pneumatic cylinder meter-out driving apparatus is used widely because it is clean, lightweight, and can be easily serviced. In this study an estimation method of energy consumption for pneumatic cylinder meter-out driving apparatus is proposed. The proposed method is derived from state equation and energy equation of air, and, the equation of motion of a moving part of a pneumatic cylinder reflecting the characteristics of the meter-out driving. The effectiveness of the proposed method is proved by simulation study and it demonstrates that the proposed method can evaluate the energy consumption quickly and easily when the parameters of the driving apparatus are changed.

• 산업공학
• /
• 제23권1호
• /
• pp.58-67
• /
• 2010

The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.234-240
• /
• 2014

Driving-related injuries associated with elderly drivers are on the rise, although the overall rate of driving-related injuries has decreased. To determine the causes of this trend, we researched existing vehicle systems that use different sensors and signals to promote safe driving. We found that although the systems alert drivers to potential collisions and assist them in finding a location easily, they were created by people who rarely use the systems in their daily lives. For the most part, they're not created by people with driving difficulties caused by health problems, which in turn often afflict the elderly. To address this issue, we analyzed the drawbacks of the current systems and used a focus group of people with body conditions that have declined due to age to discover the problems they encounter while driving. With the focus group, we used diverse research activities, such as observation and interview to demonstrate how new system concepts could be developed for the elderly. Finally, we propose that adequate system concepts for the elderly would improve driving safety and provide a more enjoyable driving environment for this population.