• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.56-62
• /
• 2017

Although most electricity production contributes to air pollution, the vehicle organizations and environmental agency categorizes all EVs as zero-emission vehicles because they produce no direct exhaust or emissions. Currently available EVs have a shorter range per charge than most conventional vehicles have per tank of gas. EVs manufacturers typically target a range of 160 km over on a fully charged battery. The energy efficiency and driving range of EVs varies substantially based on driving conditions and driving habits. Extreme outside temperatures tend to reduce range, because more energy must be used to heat or cool the cabin. High driving speeds reduce range because of the energy required to overcome increased drag. Compared with gradual acceleration, rapid acceleration reduces range. Additional devices significant inclines also reduces range. Based on these driving modes and climate conditions, this paper discusses the performance characteristics of EVs on energy efficiency and driving range. Test vehicles were divided by low / high-speed EVs. The difference of test vehicles are on the vehicle speed and size. Low-speed EVs is a denomination for battery EVs that are legally limited to roads with posted speed limits as high as 72 km/h depending on the particular laws, usually are built to have a top speed of 60 km/h, and have a maximum loaded weight of 1,400 kg. Each vehicle test was performed according to the driving modes and test temperature ($-25^{\circ}C{\sim}35^{\circ}C$). It has a great influence on fuel efficiency amd driving distance according to test temperature conditions.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.65-76
• /
• 2000

To measure the fuel consumption rate of a vehicle, a car is tested on chassis dynamometer following given driving mode. But the fuel consumption rate measured by this method may be somewhat different from that measured in on-road driving conditions. It may be due to not considering road grade in driving modes. In this study, new driving modes which include road grade are proposed, and the simulation program to estimate the real driving fuel consumption rate of a vehicle is developed. On-road car tests to verify the simulation program are carried out and the results of the simulation are analysed and compared with those of the experiments.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.1-7
• /
• 2018

전기자동차용 전동기는 운전모드에 따라 효율특성이 차이가 나기 때문에 저속 및 고속의 운전모드에서 고효율특성을 평가하기 위한 연구는 매우 중요하다. 따라서 전기자동차 구동용 전동기의 고토크 및 고출력 밀도, 고효율특성을 변경할 수 있는 설계 방안이 필요하다. 본 논문에서는 매입형 영구자석 동기전동기의 고정자와 회전자의 직경비를 각각 0.62, 0.65, 0.68로 변경 설계하여 전 운전구간의 효율특성과 시내 및 고속도로 운전모드에서의 평균효율특성을 분석하였다. 전 운전구간의 효율특성을 분석한 결과, 직경비가 증가할수록 고효율 구간이 저속 저토크 구간으로 이동하고, 직경비가 감소할수록 고효율 구간이 고속 저토크 부근으로 이동함을 확인하였다. 시내 및 고속도로 운전모드에서의 평균효율특성을 분석한 결과, 직경비 0.68 모델이 직경비 0.63 및 0.65 모델보다 평균효율이 높게 분석되었으며 시내 및 고속도로 주행모드에 적합함을 확인하였다.

• 한국ITS학회 논문지
• /
• 제16권4호
• /
• pp.153-163
• /
• 2017

본 연구에서는 운전자 별로 생활 중에 이동하는 주행 도로의 특징 및 교통상황이 서로 다르며 운전습관이 상이함을 고려하여, 운전자 혹은 운전자 그룹별 기계학습모형을 구성하고, 학습된 모델을 분석하여 운전자의 주행모드 별 특징을 탐색하여 자율 주행 자동차를 시뮬레이션 하였다. 운전지식을 활용하여 주행조작 전후 센서의 동작 상황에 따라 8종류의 종방향 모드와 4종류 회전모드로 구분하고, 종방향 모드와 회전모드를 결합한 21개의 결합형 주행모드로 세분화 하였다. 주행모드가 레이블 된 시계열 데이터에 대해 딥러닝 지도학습 모델인 RNN (Recurrent Neural Network), LSTM (Long Short-Term Memory), Bi-LSTM 모델을 활용하여서 운전자 별 혹은 운전자 그룹별 주행데이터를 학습하고, 학습된 모델을 테스트 데이터 셋에서 주행 모드인식률을 검증하였다. 실험 데이터는 미국 VTTI 기관에서 수집된 22명의 운전자의 1,500개의 실생활 주행 데이터가 사용되었다. 주행 모드 인식에 있어, 데이터 셋에 대해 Bi-LSTM 모델이 RNN, LSTM 모델에 비해 향상된 성능을 보였으며, 최대 93.41%의 주행모드 인식률을 확인하였다.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.200-206
• /
• 2016

Recently, the certification procedure for exhaust emission regulation of LDV has tested with the NEDC mode in the laboratory. But the on-road exhaust emissions exceed the standard emission limits. Therefore, it is important to analyze the real-driving emissions (RDE) with a portable emissions measurement system (PEMS). In present study, the on-road emissions were measured with a PEMS and evaluated by moving averaging window (MAW) method. Also, it was compared with the $CO_2$ and $NO_x$ emissions for real-driving and test modes from euro-6 light-duty vehicles equipped with SCR and LNT systems. In results, on-road $NO_x$ emission has been 2.3-10.0 times higher than the standard $NO_x$ emission limit on NEDC mode. The reason was that the test modes did not reflect traffic and various real-driving patterns sufficiently.

• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.403-411
• /
• 2010

Recently, emission tests for heavy-duty vehicles have been conducted by heavy-duty engine dynamometer. But, it contains weaknesses that present inconveniences to install and uninstall engines and limitations to reflect on practical characteristics for vehicle driving. On the other hand, chassis dynamometer test is able to differentiate characteristics of real driving patterns due to the reason that vehicles can be examined by utilizing chassis dynamometer. This study aimed at comparing the characteristic of emitting regulatory substances of urban buses on Heavy-duty chassis dynamometer. The characteristic was analyzed based on vehicle speed by using both domestic and overseas developed heavy-duty vehicle test modes. As a result, this work attempted to investigate possibilities to take advantage of Heavy-duty vehicle test modes as a method to manage emissions from heavy-duty vehicles.

• 전기의세계
• /
• 제21권3호
• /
• pp.31-40
• /
• 1972

This study intends to investigate the optimal switching modes of a double-capacitive thermal system under different constraints on the state and the control variable, by the application of the Pontryagin's Minimum Principle. Throughout the development, the control effort is assumed to have two modes of state: M or zero and the terminal times being fixed. In the first part of this study, the Principle is discussed under various conditions for this particular problem, with different criterion functions and in the same time imposing a certain constraints; i) on the terminal states, ii) on functions of the terminal states. Depending upon the upper bound value of the control vector, possible driving modes of the states are studied from which particular optimal driving modes are extracted so as to meet the specified constraints and boundary conditions imposed in the problem. Numerical solutions are evaluated for an over0damped, double-capacitive thermal plant and the optimal solutions: the switching mode, the optimal switching time, and the control effort are compared with the analytical results, in the second part of this work, to confirm the development.

• 산업경영시스템학회지
• /
• 제24권65호
• /
• pp.51-63
• /
• 2001

The present experiment investigated the possibility of evaluating of the human sensibility contingent on the speed and modes of driving using the responses from the autonomic nervous system, subjective assessments, Simulator Sickness (55) in dynamic simulator. The three conditions of the speed of driving were 40 $\pm$ 10 km/h, 100$\pm$10 km/h, 160 $\pm$ 10 km/h, and the participant was instructed to drive the car for three minutes on the elliptical track. It is programed in such a way that the modes of driving can be changed smoothly using road DB in Dynamic Simulator, and for signifying the change of the condition the road signs were used. The instruction was given to the participant to drive the car on the fixed speed of 20 km/h for 30 seconds, then to drive the car on sudden-start mode of driving from the 20 km/h to 160 km/h within 10 seconds. For the sudden-stop mode of driving, it was instructed that stop the car from the speed of 160km/h to 20km/h within 10 seconds when the subject see the road sign, then drive the car at the fixed speed of 20 km/h for 30 seconds. The results of the subjcetive assessment showed that the level of pleasantness and the tension was increased, and physiological response showed that the level of activity of the autonomic responses were also increased as the speed of the car increased. Also, for results on the driving modes showed that the level of pleasantness was highest for the sudden-stop, next highest was sudden-start, and the lowest was 20 km/h fixed speed condition for the subjective assessment, and tile order of the level of activation of the autonomic nervous system showed the same results as above. From the results of the present study it was concluded that the presentation and evaluation of the stimulus for the human sensitivity is possible in dynamic simulator.

• 감성과학
• /
• 제4권1호
• /
• pp.53-60
• /
• 2001

As a part of HMS(Human-Machine System), the car is very important thing in common life. It is also a significant part to study on the controllers of car that is intentively related with all sensibilities during driving. There are lots of controllers on seating buck of the car. However, there are few study on the sensibility analysis of them. Most of all, the foot controller could be easily overlooked because it could be invisible. This study was based on relationship that the controllers fitted to the driving posture in the drivers' sensibility difference of two transmission modes, automatic and manual transmission. The results show the driver's preference driving posture and sensibility in two kinds of transmission cars. Consequently, it should be designed the seating buck for two different types respectively to be taken comfort driving posture and improve the safety for drivers. Also, it could reduce the fatigue and discomfort in the task of driving. The design of the controllers strongly effects on the drivers' response time. hereby this study was accessed to the sensibility of Korean with analyzing the relationship, quantitative data, and sensibility difference between two kinds of transmission cars.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.9-14
• /
• 2002

The durability prediction of emission control components, especially 02 sensor and catalytic converter, is getting more important as emission regulation is getting stricter and vehicle durability mileage requirement is also extended from 80,000 ㎞ to 160,000 km in Korean market. And the duration of vehicle mileage accumulation to get vehicle exhaust emission deterioration factor for certification is required to be shorter in order to reduce the vehicle development time. Since most of the vehicle emission development tests are done on chassis dynamometer and aging bench by using vehicle aging modes, real road condition and in-use driving patterns must be reflected into them to predict the vehicle emission level and to meet emission regulation especially at high mileage. In order to get the frequent driving pattern of vehicle and the aging characteristic of emission components, a vehicle was tested by changing drivers and driving roads around Seoul. Real road driving patterns were analyzed and compared with those of the certification modes which are well known in automotive industry.