• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.47-52
• /
• 2007

LMTT (Linear Motor based Transfer Technology), which is a new type transfer system used in the maritime container terminal for the port automation, is driven by PM LSM (Permanent Magnetic Linear Synchronous Motor), and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. Because the shuttle car is supported by four wheels in opposition to have five times length for the width of it, a larger deflection than other transfer system using the linear motor occurs. This deflection changes the gap between the mover and the stator, and then brings on an ununiform thrust force. So in this study, we dealt with the structural design for the mover of the shuttle car to generate the uniform thrust force for the efficient control of it. For the investigation, the thickness for each beam of the mover was adopted as design variables, the weight of the mover as objective function, and stress and deflection of the mover as constraint condition.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.99-104
• /
• 2009

This article describes the analysis of stable grasping for multi-fingered robot. An analysis method of stable grasping, which is based on the three-dimensional acceleration convex polytope, is proposed. This method is derived from combining dynamic equations governing object motion and robot motion, force relationship and acceleration relationship between robot fingers and object's gravity center through contact condition, and constraint equations for satisfying no-slip conditions at every contact points. After mapping no-slip condition to torque space, we derived intersected region of given torque bounds and the mapped region in torque space so that the intersected region in torque space guarantees no excessive torque as well as no-slip at the contact points. The intersected region in torque space is mapped to an acceleration convex polytope corresponding to the maximum acceleration boundaries which can be exerted by the robot fingers under the given individual bounds of each joints torque and without causing slip at the contacts. As will be shown through the analysis and examples, the stable grasping depends on the joint driving torque limits, the posture and the mass of robot fingers, the configuration and the mass of an object, the grasp position, the friction coefficients between the object surface and finger end-effectors.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.1-20
• /
• 2018

The aim of this study is the optimization of the parameters of interconnected Hydro-Pneumatic (HP) suspension system of a three-axle vehicle for ride comfort and handling. For HP suspension systems of equivalent vertical stiffness and damping characteristics, interconnected HP suspension systems increase roll and pitch stiffness and damping characteristics of the vehicle as compared to unconnected HP suspension systems. Thus, they result in improved handling and braking/acceleration performances of the vehicle. However, increased roll and pitch stiffness and damping characteristics also increase roll and pitch accelerations, which in turn result in degraded ride comfort performance. Therefore, in order to improve both ride comfort and vehicle handling performances simultaneously, an optimum parameter set of an interconnected HP suspension system is obtained through an optimization procedure. The objective function is formed as the sum of the weighted vertical accelerations according to ISO 2631. The roll angle, one of the important measures of vehicle handling and driving safety, is imposed as a constraint in the optimization study. Upper and lower parameter bounds are used in the optimization in order to get a physically realizable parameter set. Optimization procedure is implemented for a three-axle vehicle with unconnected and interconnected suspension systems separately. Optimization results show that interconnected HP suspension system results in improvements in both ride comfort and vehicle handling performance, as compared to the unconnected suspension system. As a result, interconnected HP suspension systems present a solution to the conflict between ride comfort and vehicle handling which is present in unconnected suspension systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.399-400
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal fur the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the frame part of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the frame, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• Land and Housing Review
• /
• v.11 no.2
• /
• pp.1-14
• /
• 2020

The aim of this study is to empirically identify the differentiating characteristics of determinant factors on sing-person households' commuting mode choice compared to multi-person households' one in order to establish the customized police directions to decrease private car use in commuting. While the study use the 2% sample survey data on the population and housing in 2015, it employ multinomial logit models on relative choice probability of such alternative commuting modes as bus, subway or rail, and walking, rather than driving. As potential determinant factors, the study employs demographic, socio-economic, and housing and residential one for both models of single-person and multi-person households. The study finds that the behavior of commuting mode choice has distinctive difference by gender, marriage status, physical activity constraint, job type, residential period in current housing of the single-person household's workers compared to the multi-person households' ones. Based on the findings, the study deduce ten commuting policy directions customized for the single-person household.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.321-324
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal for the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the mover of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the mover, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.3
• /
• pp.105-112
• /
• 2022

The current study is at the forefront of examining the theory of principal-agent framework and financing constraints to explain the level of corporate innovation. To boost the firm's level of innovation, this study uses corporate governance and corporate performance as driving factors. The study's secondary goal is to give information on the parallel relationship between corporate governance and the level of corporate innovation. This study used a two-step least square (TSLS) regression analysis to examine such a simultaneous association using secondary data from Indonesian listed businesses from 2000 to 2021, which totaled around 1,910 observations. This study uses the Principal Component Analysis (PCA) tool to test cumulative variances of potential corporate governance indicators such as the total commissioner of the firm (TCOM), total independent commissioner of the firm (INDPCOM), the proportion of institutional ownership (INSOWN), total female commissioner (FEMCOM), CEO duality (CEODUAL), and type of the firm (SOE). As a result, PCA reveals that four of these variables, omitting CEODUAL and SOE, were a corporate governance construct. Furthermore, the study discovered that the amount of firm innovation and corporate governance are related.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.345-351
• /
• 2016

This study was carried out to determine an optimal lean $NO_x$ trap (LNT) regeneration condition based on a $NO_x$ storage fraction. The LNT regeneration was performed by an in-cylinder post fuel injection method. A $NO_x$ storage fraction is defined by the ratio of current cumulated $NO_x$ amount in the LNT to the $NO_x$ storage capacity: 0 means empty and 1 fully loaded. In this study five engine operating conditions were chosen to represent the New European Driving Cycle. With various $NO_x$ storage fractions each engine operating condition, the LNT regeneration was executed and then $NO_x$ conversion efficiency, additional fuel consumption, CO and THC slip, peak catalyst temperature were measured. The results showed that there exist an optimal condition to regenerate the LNT, eg. 1500 rpm 6 bar BMEP with below 0.7 $NO_x$ storage fraction in this experimental constraint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.632-639
• /
• 2018

Recently, a policy has been enforced to supply Plug-in Electric Vehicles (PEVs) but this may require reinforcement of the power system depending on its clustering because PEVs are charged directly from power systems. On the other hand, as the reinforcement of power system is limited by time and budget, it is important to supply the charging demand of PEVs efficiently using the existing power systems to increase the diffusion of PEVs. This paper establishes a charging schedule for Plug-in Electric Vehicles (PEVs) considering the power system constraints. For this, the required amount and time of the charging demand for an individual PEV was modeled to integrate into power systems based on the driving pattern and charging tariff of PEV. Furthermore, the charging schedule of PEVs was established to meet the power system constraints by calculating the operating conditions of the power systems with PEVs.

• International Commerce and Information Review
• /
• v.19 no.2
• /
• pp.237-258
• /
• 2017

This research thoroughly analyzes prior literature related to the flexibility of cargo airlines to switch the airport and discusses the driving factors of such footloose nature. The main purpose of the study is to identify the most deterrent factors leading to airport relocation decision which determines cargo industries role on the global trade. Qualitative research based on systematic process analysis was conducted as a main research method. As a result, 24 factors related to airport-airline relationship were chosen and categorized into four main groups; (1) Location issues, (2) Restrictions, (3) Poor quality, and (4) High costs. The findings derived from the analysis of selected studies suggest that restriction related issues (e.g. night-time flight restrictions, customs administration) followed by location issues (e.g. absence of origin destination demand) have created more constraint to airport-airline relationship.