• 한국안전학회지
• /
• 제28권5호
• /
• pp.66-70
• /
• 2013

This study examined the relative effects of education and eco-IVIS(in-vehicle information system) to reduce fuel consumption and greenhouse gas emissions. Also the study investigated the increasing of driving workload when drivers interact with intervention technique. Thirty participants randomly assigned into two groups(training and eco-IVIS) and conducted driving before and after the each intervention technique. While driving, we observed three driving behaviors: Frequency of excessive RPM, percent of speeding, and mean fuel efficiency. Also the Driver Activity Load Index was used to rate participants' subjective ratings of driving workload. Although the results showed positive impact of both education and eco-IVIS to increasing the eco-driving behaviors, eco-IVIS was more effective than education. However, we found comparable level of driving workload in the education and eco-IVIS.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.139-145
• /
• 2017

PURPOSES : This study analyzed the difference in a driver's workload between using a driving simulator and field driving in tunnel, highway. METHODS : Based on the literature review, it was found that a driver's workload could be quantified using biosignals. This study analyzed the biosignal data of 30 participants using data collected while they were using a driving simulator and during a field test involving tunnel driving. Relative energy parameter was used for biosignal analysis. RESULTS : The driver's workload was different between the driving simulator and field driving in tunnels, highway. Compared with the driving simulator test, the driver's workload exhibited high value in field driving. This result was significant at the 0.05 level. The same result was observed before the tunnel entrance section and 200 m after the entrance section. CONCLUSIONS : This study demonstrates the driving simulator effect that drivers feel safer and more comfortable using a driving simulator than during a field test. Future studies should be designed considering the result of this study, age, type of simulator, study site and so on.

• 대한인간공학회지
• /
• 제32권2호
• /
• pp.167-177
• /
• 2013

Objective: This study aims to compare the usefulness of subjective measures which are comprised of existing methods like NASA-TLX, Bedford-scale and ZEIS and newly developed method like DALI in measuring drivers' mental workload in terms of validity, sensitivity and diagnosticity. Background: Nowadays, with the development of intelligent vehicle and HMI, mental workload of driver has become more and more important. For this reason, the studies on drivers' mental workload about driving situation and the use of information technology equipment such as mobile phones and navigations were conducted intensively. However, the studies on measuring drivers' mental workload were rarely conducted. Moreover, most of studies on comparison of subjective measures were used with performance based measure. However, performance based measures can cause distraction effect with subjective measures. Method: Participants (N=19) were engaged in a driving simulation experiment in 2 driving contexts (downtown driving and highway driving context). The experiment has 2 sessions according to driving contexts. The level of difficulties by driving contexts were adjusted according to existence of intersections, traffic signs and signals, billboards and the number of doublings. Moreover, as criteria of concurrent validity and sensitivity, the EEG data were recorded before and during the sessions. Results: The results indicated that all subjective methods were correlates with EEG in high-way driving. On the contrary to this, in downtown driving, all subjective methods were not correlates with EEG. In terms of sensitivity, multi-dimensional scales (NASA-TLX, DALI) were the only ones to identify differences between high way and downtown driving. Finally, in terms of diagnosticity, DALI was the most suitable method for evaluating drivers' mental workload in driving context. Conclusion: The DALI as newly developed method dedicated to evaluate driver's mental workload was superior in terms of sensitivity and diagnosticity. However, researchers should consider the characteristics of each subjective method synthetically according to research objective by selecting the method in subjective measures. Application: The results of this study could be applied to the intelligent vehicle and next generation of HMI design to decrease mental workload of driver and for the development of new subjective method in vehicle domain.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.145-154
• /
• 1998

The effects of secondary task on driving performance and subjective workload were investigated during a simulated driving. The driving performance was determined by the appropriateness of break timing. The driving simulator was provided by the Korea Road Traffic Safety Association. The subjective workload was tested by using a multidimensional measure such as NASA-TLX. Road was categorized into two types: narrow alley and wide street. The secondary task included pushing the number on the cellular phone, pushing radio channel, and conversing with a passenger. Seventeen subjects volunteered in the study. The data were analyzed by using SAS. Results showed that using the cellular phone and pushing channel during driving caused 3∼22% decline of driving performance and 42∼59% increase of subjective workload respectively. These results indicated that the secondary task could be potentially dangerous although there was not a significant performance decrease due to the notable increase of mental workload. In the future, if we can use a more sensitive and realistic driving simulator, the effects of secondary task under a dynamic driving situation can be investigated.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.73-79
• /
• 2009

Driving is a complex psychomotor task often interrupted by secondary activities that increase cognitive workload and divert attention away from the roadway. The risk of inattentive driving is known to vary with age. To assess the characteristics of advancing age on driver's cognitive workload under dual task condition, we evaluate the performance of 96 drivers divided into three age groups: 20's, 40's, and 60's. This study considers driver's cognitive workload in the context of urban and highway driving. Error rate & Dual task cost are used to measure driver's cognitive workload. Results indicate that age impacts cognitive workload during dual task driving conditions.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.17-24
• /
• 2010

There has been recent interest in intelligent vehicle technologies, such as advanced driver assistance systems (ADASs) or in-vehicle information systems (IVISs) that offer a significant enhancement of safety and convenience to drivers and passengers. However, unsuitable design of HMI (Human Machine Interface) must increase driver distraction and workload, which in turn increase the chance of traffic accidents. Distraction in particular often occurs under a heavy driving workload due to multitasking with various electronic devices like a cell phone or a navigation system while driving. According to the 2005 road traffic accidents in Korea report published by the ROad Traffic Authority (ROTA), more than 60% of the traffic accidents are related to driver error caused by distraction. This paper suggests the structure of vehicle environment for real-time driving behavior monitoring system while driving which is can be used the driver workload management systems (DWMS). On-road experiment results showed the feasibility of the suggested vehicle environment for driving behavior monitoring system.

• 대한인간공학회지
• /
• 제29권5호
• /
• pp.735-739
• /
• 2010

Driving workload is increasing according to developing new in-vehicle devices and introducing driving information systems. In this research using a driving simulator, EFRP (Eye Fixation Related Potential) was measured for evaluating driving attention and distraction while tasking cognitive workload, n-back tasks. The result of EFRP was compared with driver behaviors. Results suggest that EFRP is able to use for a method of evaluating driving workload, however, the analysis of driver behavior is difficult to find driving attention and distraction in the case of free flow of traffic situation.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2002년도 추계학술대회 논문집
• /
• pp.114-119
• /
• 2002

In driving situation, driver’s performance can be divided into primary task and secondary task. Many studies of primary task have been in progress, but those of secondary task are not implemented sufficiently. However, the driver’s error is greatly influenced by secondary task. In this study, an experiment was assessed to determine the relationship between the driver's operation time for the secondary task and mental workload due to speed changes in a driving simulation. The time to perform the secondary task was analyzed with Fitts’ Law, and mental workload was analyzed with RNASA-TLX(Revision of NASA-Task Load Index). The results has showed that the higher speed, the weaker the explanation by the use of Fitts' Law and the result of analyzing mental workload using RNASA-TLX was similar to the result of Fitts’ Law.

• 대한교통학회지
• /
• 제34권6호
• /
• pp.560-569
• /
• 2016

운전자의 정신부하는 교통사고를 감소하는데 중요한 역할을 하는 것으로 선행연구에서 나타나고 있다. 본 연구에서는 도로 및 환경요소 뿐만 아니라 운전자의 알파파, 베타파, 감마파를 측정할 수 있는 운전시뮬레이터를 활용하여 분석자료를 확보하였다. 운전자의 운전부하와 감마파의 연관성을 분석하기 위한 방법으로 로지스틱모형을 적용하였다. 분석결과, 도로의 커브가 많을수록 운전자의 베타 영역은 증가하는 반면 알파와 감마 영역은 감소되는 것으로 나타났다. 그리고, 운전부하는 감마영역과 음의 상관관계를 지닌 것으로 나타났다. 결론적으로, 직선구간에서의 도로주행이 운전자의 스트레스를 줄이고 행복감을 높일 수 있을 것으로 판단된다.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.