• 한국ITS학회 논문지
• /
• 제14권1호
• /
• pp.77-84
• /
• 2015

2011년 교통부문 온실가스 배출량은 85.04백만$tonCO_2eq$이며 도로분야에서 발생한 온실가스 배출량은 95% 비율을 차지한다. 이러한 온실가스 배출량 감축의 일환으로 급가속 회피, 경제속도 준수 등 에코드라이빙 교육 및 홍보 프로그램이 활성화되고 있으나 근원적인 배출량 감축 기술 개발은 미비한 실정이다. 따라서 본 연구는 도로 경사도 별 최적가속도를 분석하고 하류부의 오르막 구간을 대상으로 연료 효율적인 주행방법의 제시를 목적으로 하였다. 오르막 주행 시 주행모드에 따른 시나리오를 설정하고 시나리오별 속도변화량을 다르게 설정하여 속도 프로파일을 생성하였다. 각 속도 프로파일을 Comprehensive Modal Emission Model에 적용하여 연료소모량을 산정하였다. 도로 경사도, 오르막길이 별 연료소모량이 가장 적게 소모된 주행모드와 속도변화량을 도출하였다. 도출된 주행모드와 속도변화량을 기반으로 에코드라이빙 시 소모된 연료소모량과 cruise control 주행 시 소모된 연료소모량을 비교 분석하였다. 분석 결과, 오르막 지형을 100kph, 90kph, 80kph 속도로 주행 시 에코드라이빙 주행의 연료소모량이 cruise control 주행 보다 각각 33.9%, 30.8%, 5.3% 감축효과가 나타나는 것으로 분석되었다.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1060-1067
• /
• 2010

In this paper, we present a new type of spherical robot having two arms. This robot, called KisBot, mechanically consists of three parts, a wheel-shaped body and two rotating semi-spheres. In side of each semi-sphere, there exists an arm which is designed based on slider-crank mechanism for space efficiency. KisBot has hybrid types of driving mode: rolling and wheeling. In the rolling mode, the robot folds its arms through inside of itself and uses them as pendulum, then the robot works like a pendulum-driven robot. In the wheeling mode, two arms are extended from inside of the robot and are contacted to the ground, then the robot works like a one-wheel car. The Robot arms can be used as a brake during rolling mode and add friction to the robot for climbing a slope during wheeling mode. We developed a remote controlled type robot for experiment. It contains two DC motors which are located in the center of each semi-sphere for main propulsion, two RC motors for each arm operation, speed controllers for each semi-sphere, batteries for main power source, and other mechanical components. Experiments for the rolling and wheeling mode verify the hybrid driving ability and efficiency of the our proposed spherical robot.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1222-1229
• /
• 2007

In this paper, we propose a new obstacle negotiation method for the rescue robot. The rescue robot has a variable geometry single-tracked mechanism, so it can maximize a contact length with ground for the adaptability to off-road and pursue a stable system due to the lower center of gravity. In this research, we add the basis of autonomous navigation, driving mode control based on obstacle detection, to the robot to realize automation of mode transformation. Obstacle detection using PSD(Position Sensitive Device) infrared sensors gives active transformation of the track shape. Finally, experimental results about mentioned are presented.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.566-574
• /
• 2005

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MO-ARS) might be one candidate of several systems against the ship's rolling. As the movable range of the mass on the ship is finite, the control system must include restriction on the mass position to protect the device and the ship. This restriction usually causes windup phenomenon and control performance is deteriorated seriously. Two control algorithms, anti-windup control and saturated sliding mode control, are studied in this paper. Control performance and robustness problem are checked out by numerical simulations.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.159-165
• /
• 2010

본 논문에서는 원격제어기반 이동체 감지 및 변형 퍼스널 로봇시스템을 설계 및 구현하고 성능을 분석하였다. 설계에 있어서 중점적으로 고려한 사항은 퍼스널 로봇의 버튼기반 및 원격제어방식 설계, 휠 주행모드/보행모드/자동 주행모드/감시모드의 동작모드 설계, 원격제어기능 설계, 주변환경 변화감지 기능 설계, 모션데이터 추출기법 설계, 장애물 탐지기법 설계이다. 개발한 퍼스널 로봇은 언제 어디서나 원격지에서 인터넷과 접속하여 로봇의 동작 및 영상인식을 제어하여 주변 환경변화를 감지하는 이동체 감지 및 4가지의 변형이 가능하다. 또한 실험결과, 실내의 문턱이나 전선등으로 이루어진 지형의 요철을 다리 관절로 이동 가능하며, 자동 주행모드로 진행 할 경우 30cm*30cm 공간의 장애물 환경에서 3개의 적외선 센서를 이용하여 장애물을 성공적으로 벗어남을 확인하였다.

• International Journal of Automotive Technology
• /
• 제5권2호
• /
• pp.109-114
• /
• 2004

This paper presents a closed-loop evaluation of the Vehicle Stability Control (VSC) system using a vehicle simulator. Human driver-VSC interactions have been investigated under realistic operating conditions in the laboratory. Braking control inputs for vehicle stability enhancement have been directly derived from the sliding control law based on vehicle planar motion equations with differential braking. A driving simulator has been validated using actual vehicle driving test data. Real-time human-in-the loop simulation results in realistic driving situations have shown that the proposed controller reduces driving effort and enhances vehicle stability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.511-516
• /
• 2000

In order to not only perform as a extreme model under the severe operating condition but also acquire more diverse and advanced control capability utilizing high compliance, active vibration control of a flexible 2-link robot manipulator are investigated. Multi variable-structured frequency shaped optimal sliding mode is proposed for the flexible robot manipulator like control system, whose control variables, an angular motion of joint and vibration of flexible link, have to be controlled simultaneously by one control torque at a driving joint. The control system is divided into two subsystems, a control input related subsystem and an added subsystem. The proposed sliding mode, composed of multi control variables, makes optimized relation between subsystems and a individual control input, thus, the sliding mode controller can compensate whole dynamics of each subsystems simultaneously. And the possibility and effectiveness are verified by vibration control of a manipulator having two flexible links. Simulation and experiment results show that the proposed control scheme achieves the purpose effectively.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.634-642
• /
• 2004

Unlike actual vehicles, a vehicle driving simulator is limited in kinematic workspace and bounded on dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematic limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies, difficulty in returning the simulator to its origin using only high pass filters and etc. This paper proposes a new tilt coordination method as an algorithm which gives more accurate sensations to drivers. In order to reduce time for returning the simulator to its origin, a new washout algorithm that the proposed algorithm selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.1-11
• /
• 2011

The skid-steering method that applied a number of mobile robot currently is extremely effective in narrow area. But it contains several problems such as its natural properties, slip, occurred by different direction between vehicle's driving and wheel's rotary. Through this paper, suitable control algorithm of $6{\times}6$ skid steering wheeled vehicle and its driving methods are proposed by analyzing the behavior $6{\times}6$ skid-steered wheeled vehicle model designed by engineering analysis strategy. To do this, based on a behavior of designed driving system, required torque and other performance of in-wheel type motor system are considered, and finally control algorithm for each wheel is proposed and simulated using this model. To test the proposed vehicle system, driver model is designed using PID closed loop system and included in the total driving control algorithm. The Performance of designed vehicle model is verified by using DYC (Direct Yaw Control) cornering mode and slip mode control to follow the steering input which are essential to evaluate the driving performance of $6{\times}6$ vehicle. Proposed modeling strategy and control method will be implemented to the real $6{\times}6$ in-wheel drive type vehicle.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.62-68
• /
• 2013

This paper describes development of 4 Wheel Drive (4WD) Electric Vehicle (EV) based driving control algorithm for severe driving situation such as icy road or disturbance. The proposed control algorithm consists three parts : a supervisory controller, an upper-level controller and optimal torque vectoring controller. The supervisory controller determines desired dynamics with cornering stiffness estimator using recursive least square. The upper-level controller determines longitudinal force and yaw moment using sliding mode control. The yaw moment, particularly, is calculated by integration of a side-slip angle and yaw rate for the performance and robustness benefits. The optimal torque vectoring controller determines the optimal torques each wheel using control allocation method. The numerical simulation studies have been conducted to evaluated the proposed driving control algorithm. It has been shown from simulation studies that vehicle maneuverability and lateral stability performance can be significantly improved by the proposed driving controller in severe driving situations.