• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.149-156
• /
• 2011

Considerable evaluation is needed to design a new longitudinal tunnel in advance because it damaged drivers' driving safety and heightened the possibility of traffic accidents with its physical characteristics. Specifically, considering traffic psychological and ergonomic factors was very important to prevent the difficulty of maintaining safe speed, the increase of the drowsy driving, the fatality of traffic accidents, and subjective feelings such as anxiety while driving a car through the tunnel, from design to construction. This study dealt with driving safety evaluation of an original road alignment design for the longitudinal tunnel (length: above 10km) with a driving simulator, and helped us to improve an original road alignment design and make an alternative road alignment design with presenting risky districts. The results of experiment showed that inflection points were revealed more risky districts, because they impaired driving safety and elevated driver workload while driving a car through around the inflection points of two-way route. Finally, the limitations and implications of this study were discussed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2012

In this paper Vehicle driving simulator have been used in the development and modification of models. A real-time simulation system and washout algorithm for an excavator have been developed for a driving simulator with six degrees of freedom. An interesting question, "how the 6 DOF Driving Simulator can be controlled optimally for the various tasks?" is not easy to be answered. This paper presents the hardware and software developed for a driving simulator of construction vehicle. A simulator can reduce cost and time a variety of driving simulations in the laboratory. Using its 6 DOF Simulator can move in various modes, and perform dexterous tasks. Driving simulators have begun to proliferate in the automotive industry and the associated research community. This effort involves the real-time dynamic of wheel-type excavator the design and manufacturing of the Stewart platform an integrated control system of the platform and three-dimensional graphic modeling of the driving environments.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.319-325
• /
• 2012

Objective: The aim of this study was to develop the assistive device for accelerator and brake pedals using bio-signals from the prefrontal lobe in the driving simulator and evaluate its performance. Background: There is lack of assistive devices for the driving in peoples with disabilities in Korea. However, if bio-signals and/or brain waves are used at driving a car, the people with serious physical limitations can improve their community mobility. Method: 15 subjects with driver's license participated in this study for experiment of driving performance evaluation in the simulator. Each subject drove the simulator the same course 10 times in three separated groups which use different interface controllers to accelerate and brake: (1) conventional pedal group, (2) joystick group and (3) bio-signal group(horizontal quick glance of the eyes and clench teeth). All experiments were recorded and the driving performances were evaluated by three inspectors. Results: Average score of bio-signal group for the driving in the simulator was increased 3% compared with the pedal group and was increased 9% compared with the joystick group(p<0.01). The subjects using bio-signals was decreased 44% in number of deduction compared with others because the device had the built-in modified cruise control. Conclusion: The assistive device for accelerator and brake pedals using bio-signals showed significantly better performance than using general pedal and a joystick interface(p<0.01). Application: This study can be used to design adaptive vehicle for driving in people with disabilities.

• Journal of Drive and Control
• /
• v.20 no.3
• /
• pp.35-41
• /
• 2023

Radish and Chinese cabbage are the most produced and consumed vegetables in Korea. The mechanization of harvesting operations is necessary to minimize the need for manual labor. This study to develop and evaluate the performance of a multi-purpose driving platform that can apply modular Radish and Chinese cabbage harvesting devices. The multi-purpose driving platform consisted of driving, device control, engine, hydraulic, harvesting, conveying, and loading part. Radish and Chinese cabbage harvesting conducted using the multi-purpose driving platform each harvesting module. The performance of the multi-purpose driving platform was evaluated the field efficiency and loss rate. The total Radish harvesting operation time 34.3 min., including 28.8 min., of harvesting time, 1.9 min., of turning time, and 3.6 min., of replacement time of bulk bag. During Radish harvesting, the field efficiency and average loss rate of the multi-purpose driving platform were 2.0 hr/10a and 3.1 %. Chinese cabbage harvesting operation 49.3 min., including 26.6 min., of harvesting time, 4.6 min., of turning time, and 18.1 min., of replacement time of bulk bag. During Chinese cabbage harvesting, the field efficiency and average loss rate of the multi-purpose driving platform 2.1 hr/10a and 0.1 %. Performance evaluation of the multi-purpose driving platform that harvesting work was possible by installing Radish and Chinese cabbage harvest modules. Performance analysis through harvest performance evaluation in various Radish and Chinese cabbage cultivation environments is necessary.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.307-312
• /
• 1998

In forklift operations, awkward postures due to backward driving may put drivers to the risk of CTD or low back pain. In this research, 6 forklift drivers were surveyed with OWAS for objective posture evaluation and bodymaps for self-report evaluation. The backward driving happened more frequently than forward driving as expected, and, as work hours passed by, the drivers naturally tended to assume the easier work postures in inverse proportion to the frequency of the backward operations. According to the results of OWAS, 60 % of the work postures in the forklift operations belonged to the category II, III, and IV classified serious. Especially, in the backward driving, the postures with the neck twisted over $45^{\circ}$ occupied 82.4 %. In addition, discomfort on the neck, left shoulder, and low back was frequently reported in the self-reports.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.312-312
• /
• 2000

Human sensibility ergonomics is applied to evaluation of dynamic performance of a vehicle driving simulator. Vehicle, driving environment, and human perception models are constructed and integrated. Driving simulations are carried out based on these models. This study defines a set verbal expressions collected and investigates which are the most appropriate for describing the fidelity of translational and angular accelerations of the driving simulator. An statistical analysis is uscd to find correlation between the ergonomic sensibility and the cut-off frequency of the washout algorithm. This study suggests a methodology to obtain an ergonomic database which can be used for the performance evaluation of dynamic environments.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.13-19
• /
• 2007

This study is to establish design method and evaluation technology for drive system appropriate to articulated vehicles. The transmission system of articulated vehicles serves in the other condition compared with those of commercial vehicles, namely, they have to transmit high power to run and they have to make maximum use of the limited space. This paper reports the reviews and results of the design and evaluation method for driving gear unit of articulated vehicles and discusses various design items and methods about assembly and parts of driving gear unit.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.58
• /
• pp.71-79
• /
• 2000

In this study, through the roadside interview, drivers'feeling about fatigue has been evaluated synthetically and systematically when they drive a vehicle according to their sex, vehicle type, driving career, etc. Also, with the human sensibility evaluation technique, we grasped the human sensibility structure for the fatigue in a vehicle and as an objective evaluation index for comfort and fatigue in a vehicle, we developed a sensibility database. Through the survey and research, extracting and understanding the importance of factors which have influence on the fatigue in driving can be used as basic data that can suggest more comfort and pleasant driving environment to drivers. Also, human sensibility database regarding to the comfort and fatigue in a vehicle can be used as basic data in ergonomic vehicle design, evaluation for seat , comfort seat development, development of vibration reduction method and so on.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.735-739
• /
• 2010

Driving workload is increasing according to developing new in-vehicle devices and introducing driving information systems. In this research using a driving simulator, EFRP (Eye Fixation Related Potential) was measured for evaluating driving attention and distraction while tasking cognitive workload, n-back tasks. The result of EFRP was compared with driver behaviors. Results suggest that EFRP is able to use for a method of evaluating driving workload, however, the analysis of driver behavior is difficult to find driving attention and distraction in the case of free flow of traffic situation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.99-102
• /
• 1999

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate signal delay, feed-through voltage and image sticking. To improve these problems which are caused by the fried-through voltage, we have evaluated new driving methods to reduce the fled-through voltage. Two level gate-pulse was used for the gate driving of the cst-on-common structure pixels. And two-gate line driving methods with the optimized gate signals were applied for the cst-on-gate structure pixels. These gate driving methods were better feed-through characteristics than conventional simple gate pulse. The evaluation of the suggested driving methods were performed by using a TFT-LCD array simulator PDAST which can simulate the gate, data and pixel voltages of a certain pixel at any time and at any location on a TFT array. The effect of the new driving method was effectively analyzed.