• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.33-36
• /
• 2001

A free piston and free displacer(FPFD) Stirling cryocooler for cooling infrared and cryo-sensors is currently under development at KIMM(Korea Institute of Machinery & Materials). The FPFD Stirling cryocooler employs 1) the Stirling cycle for refrigeration, 2) linear motors for driving the cryocooler, 3) spring and gas support systems, and 4) fine gap for clearance seals. It is the most suitable design for a mechanical cryocooler utilized in night vision environment. The experimental results show KIMM-E1 Stirling cryocooler (with expander manufactured by KIMM) has the higher cooling power and faster response time at optimum charging pressure.

• 항공우주기술
• /
• 제8권1호
• /
• pp.82-97
• /
• 2009

본 연구에서는 가스발생기 사이클 엔진시스템의 제어특성을 검토하고, 제어기를 구성하기 위한 해석의 일환으로 공칭 작동점 부근에서의 선형해석을 위한 Simulink 수학적 모델을 구성하여, 엔진 스로틀링 과정에 대한 해석을 수행하였다. 스로틀 밸브의 특성이 엔진동특성에 미치는 영향을 검토하기 위하여 추력제어밸브와 가스발생기 혼합비 유지를 위한 압력균형기(pressure stabilizer)의 모델, 그리고 제어밸브 구동용 모터의 수학적 모델을 포함시켰다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2000

This paper presents an PID type fuzzy based method for nohnear engine idle controller The output is a duty cycle(DC) for driving a idle speed cont개l valve(1SCV). For precise control of SI engine, the CPS sensor and coolant temperature are used. Visual C* language is used to make simulation panel for the fast and precise idle speed control. The dSPACE board and supported Control desk program is used in experiment ta the same purpose as simulation. The experimental results have a good agreement with simulation ones.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.684-691
• /
• 2010

Rail is one of major track components for train service, it should be provided in the condition of flat and smooth driving aspect. Therefore, it is inevitable that there would be the field welding to integrate on CWR(Continuous Welded Rail) removing rail joint in these days. It is high chance to be some rail surface irregularity due to the limitation on the status of work condition If a high speed train runs on the rail surface irregularity in the welding part, big impact load comes to pass on that, so track irregularity cycle is reduced, therefore track maintenance cost can be increased. this paper has analyzed wheel load variation according to removing the rail surface irregularity using portable grinding machine in the high speed line. The result measured before and after in the field is decreased about 9.26% on the wheel load variation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.26-29
• /
• 2007

In Korean Electric Motor Unit(EMU) industry, the government should lead and drive the development of the product-oriented fundamental technologies(for example, Life Cycle Assessment, Environmental Labelling, Ecodesign, Eco-efficiency etc.) for the EMU. International Railway Union(UIC) establish UIC code 345: Environmental specification and it is based on using the product-oriented fundamental technologies. And also many foreign railway related companies already shown their environmental performance using the product-oriented fundamental technologies So, in Korean situation, it is important that let the EMU industrial player understand the importance of the product-oriented fundamental technology for the EMU and clarify who drive the development of the product-oriented fundamental technology for the EMU and what the type of driving forces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.858-859
• /
• 2015

현재 전기자동차 구동전동기는 일반적으로 희토류 영구자석을 사용한 동기전동기를 사용하고 있다. 하지만 희토류는 수급불안정성이 높아 자동차 업계는 희토류 전동기를 대체할 수 있는 방안을 찾고 있으며 그 방안 중 하나가 비희토류 자속집중형 전동기이다. 비희토류 영구자석의 수를 늘려서 희토류 전동기와 동일한 크기에 유사한 출력을 만족하게 설계했다. 마지막으로 전기자동차 구동용 비희토류 자속집중형 전동기의 특성 및 크기를 희토류 전동기와 비교하고 두 전동기를 탑재한 차량을 Advisor(Advanced Vehicle Simulator)를 사용해 주행사이클에 대한 차량효율을 비교할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.448-452
• /
• 2008

2-stroke marine diesel engine has generally one exhaust valve and three fuel injection nozzle which are key component for engine's performance and combustion. Fuel injection and exhaust valve driving system are driven by rotating of camshaft. Rotation of crank shaft drives the cam shaft through gear train that is composed of $3{\sim}4$ gear wheels. Gear column supporting the gear wheel has to bear against the dynamics forces by engine running as well as gearing forces. In this paper, structural analysis for engine structure and fatigue strength assessment of welded joint is shown. Repeatedly full cyclic simulation during one cycle is performed to investigate the structural behavior of engine. Fatigue analysis is carried out based on IIW using submodeling technique to obtain more detailed stress distribution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1132-1135
• /
• 2008

The sludge grown up in steam generators of nuclear power plants shortens the life-cycle of steam generators and reduces the output of power plants. So KHNP(Korea Hydro and Nuclear Power), the only nuclear power utility in Korea, removes it periodically using a steam generator lancing system during the outage of plants for an overhaul. KEPRI(Korea Electric Power Research Institute) has developed lancing systems with high pressured water nozzle for steam generators of nuclear power plants since 2001. In this paper, the design of a partial inter-tube lancing system for model F type steam generators will be described. The system is actuated without a DC motor inner steam generators because the motors in a steam generator make a trouble from high intensity of radioactivity as a break down.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.288-294
• /
• 2001

In this study, a new PWM method considering the actuation delay of high speed solenoid valves is proposed to improve the response characteristics of electro hydraulic servo systems controlled by high speed solenoid valves. In addition, the decision method for the system gain, the basic period of PWM, and the sampling time is proposed, Since the conventional system controlled by high speed solenoid valves is too slow to apply this method, a high speed driving circuit(Quick-Drive) which enables rapid switching of the high speed solenoid valve at a high speed sampling mode is applied to realize this method. The experimental result shows that it is possible to achieve precision and quiet control without occurrence of limit cycle and wide range dead band.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.161-167
• /
• 2001

This paper presents an approach to nonlinear engine idle controller and intake manifold absolute pressure(MAP) observer based on mean torque production model. A stable engine idle speed is important in that the unstable engine Idle mode can make engine to drooping or stall state. A sliding fuzzy controller has been designed to control engine idle speed under load disturbance. A sliding observer is also developed to estimate the intake manifold absolute pressure and compared with the actual MAP sensor value. The sliding mode observer has shown good robustness and good tracking performance. The inputs of sliding fuzzy controller are the errors of rpm and MAP. The output is a duty cycle(DC) for driving a idle speed control valve(ISCV).